Hello Laurent, Kieran, Niklas, to address the Ebisu board use case, this series allows the adv748x driver to probe with a single output connection defined. This series (hopefully) allows capturing on E3, but considering the fixed routing between HDMI->TXA and CVBS->TXB, only from HDMI input. Not having an Ebisu, I have tested on M3-W Salvator-X disabling the TXB output and the CSI20 interface connected to it. I'm able to capture with HDMI with no visible regressions. Laurent: to help testing on E3, I have pushed this series on top of Ebisu HDMI and CVBS enablement to git://jmondi.org/linux ebisu/renesas-drivers/adv748x_probe Thanks j Jacopo Mondi (2): media: i2c: adv748x: Support probing a single output media: i2c: adv748x: Handle TX[A|B] power management drivers/media/i2c/adv748x/adv748x-afe.c | 2 +- drivers/media/i2c/adv748x/adv748x-core.c | 90 ++++++++++++++++++-------------- drivers/media/i2c/adv748x/adv748x-csi2.c | 22 ++------ drivers/media/i2c/adv748x/adv748x-hdmi.c | 2 +- drivers/media/i2c/adv748x/adv748x.h | 6 ++- 5 files changed, 61 insertions(+), 61 deletions(-) -- 2.7.4
