[PATCH v7 09/12] ARM: dts: imx7s-warp: add ov2680 sensor node

[Rui Miguel Silva <rui.silva@xxxxxxxxxx>]

Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete
the camera data path for this system. Add the needed regulator to the analog
voltage supply, the port and endpoints in mipi_csi node and the pinctrl for the
reset gpio.

Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
---
 arch/arm/boot/dts/imx7s-warp.dts | 44 ++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 8e098b90c525..b1c5d8f8a2ba 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -91,6 +91,14 @@
 		regulator-always-on;
 	};
 
+	reg_peri_3p15v: regulator-peri-3p15v {
+		compatible = "regulator-fixed";
+		regulator-name = "peri_3p15v_reg";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-always-on;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "imx7-sgtl5000";
@@ -214,6 +222,27 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ov2680: camera@36 {
+		compatible = "ovti,ov2680";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2680>;
+		reg = <0x36>;
+		clocks = <&osc>;
+		clock-names = "xvclk";
+		reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		DOVDD-supply = <&sw2_reg>;
+		DVDD-supply = <&sw2_reg>;
+		AVDD-supply = <&reg_peri_3p15v>;
+
+		port {
+			ov2680_to_mipi: endpoint {
+				remote-endpoint = <&mipi_from_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1>;
+			};
+		};
+	};
 };
 
 &i2c4 {
@@ -348,6 +377,15 @@
 	#size-cells = <0>;
 	fsl,csis-hs-settle = <3>;
 
+	port@0 {
+		reg = <0>;
+
+		mipi_from_sensor: endpoint {
+			remote-endpoint = <&ov2680_to_mipi>;
+			data-lanes = <1>;
+		};
+	};
+
 	port@1 {
 		reg = <1>;
 
@@ -404,6 +442,12 @@
 		>;
 	};
 
+	pinctrl_ov2680: ov2660grp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3	0x14
+		>;
+	};
+
 	pinctrl_sai1: sai1grp {
 		fsl,pins = <
 			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
-- 
2.18.0