Hi Petr,
On Thu, Aug 09, 2018 at 03:39:48AM +0200, petrcvekcz@xxxxxxxxx wrote:
> From: Petr Cvek <petrcvekcz@xxxxxxxxx>
>
> This patch removes the dependency on an obsoleted soc_camera from ov9640
> driver and changes the code to be a standalone v4l2 async subdevice.
> It also adds GPIO allocations for power and reset signals (as they are not
> handled by soc_camera now).
>
> The patch should make ov9640 again compatible with the pxa_camera driver.
Are there board files using this driverin mainline ? (git grep says so)
Care to port them to use the new driver if necessary? You can have a
look at the SH4 Migo-R board, which recently underwent the same
process (arch/sh/boards/mach-migor/setup.c)
I also suggest to adjust the build system in a single patch with this
changes, but that's not a big deal...
>
> Signed-off-by: Petr Cvek <petrcvekcz@xxxxxxxxx>
> ---
> drivers/media/i2c/ov9640.c | 76 ++++++++++++++++++++++++++------------
> drivers/media/i2c/ov9640.h | 2 +
> 2 files changed, 55 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/media/i2c/ov9640.c b/drivers/media/i2c/ov9640.c
> index c63948989688..44129c60c524 100644
> --- a/drivers/media/i2c/ov9640.c
> +++ b/drivers/media/i2c/ov9640.c
> @@ -9,6 +9,7 @@
> * Kuninori Morimoto <morimoto.kuninori@xxxxxxxxxxx>
> *
> * Based on ov7670 and soc_camera_platform driver,
> + * transition from soc_camera to pxa_camera based on mt9m111
> *
> * Copyright 2006-7 Jonathan Corbet <corbet@xxxxxxx>
> * Copyright (C) 2008 Magnus Damm
While at there, drop the license text and add SPDX identifier please
> @@ -27,10 +28,14 @@
> #include <linux/v4l2-mediabus.h>
> #include <linux/videodev2.h>
>
> -#include <media/soc_camera.h>
> +#include <media/v4l2-async.h>
> #include <media/v4l2-clk.h>
> #include <media/v4l2-common.h>
> #include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +
> +#include <linux/gpio/consumer.h>
>
> #include "ov9640.h"
>
> @@ -323,11 +328,23 @@ static int ov9640_set_register(struct v4l2_subdev *sd,
>
> static int ov9640_s_power(struct v4l2_subdev *sd, int on)
> {
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> struct ov9640_priv *priv = to_ov9640_sensor(sd);
> -
> - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
> + int ret = 0;
> +
> + if (on) {
> + gpiod_set_value(priv->gpio_power, 1);
> + mdelay(1);
mdelay() is backed by a busy-waiting loop, according to
timers-howto.txt and for milliseconds-long sleeps is not suggested.
Please try to quantify the required delay and use msleep_range().
> + ret = v4l2_clk_enable(priv->clk);
Is this required by the pxa camera driver using v4l2_clk_ APIs?
Otherwise you should use the clk API directly.
> + mdelay(1);
> + gpiod_set_value(priv->gpio_reset, 0);
> + } else {
> + gpiod_set_value(priv->gpio_reset, 1);
> + mdelay(1);
> + v4l2_clk_disable(priv->clk);
> + mdelay(1);
> + gpiod_set_value(priv->gpio_power, 0);
> + }
> + return ret;
> }
>
> /* select nearest higher resolution for capture */
> @@ -631,14 +648,10 @@ static const struct v4l2_subdev_core_ops ov9640_core_ops = {
> static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
> struct v4l2_mbus_config *cfg)
g_mbus/s_mbus are deprecated. Unless the pxa camera driver wants them
all format negotiation should go through s_fmt/g_fmt pad operations
> {
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> -
> cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
> V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
> V4L2_MBUS_DATA_ACTIVE_HIGH;
> cfg->type = V4L2_MBUS_PARALLEL;
> - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
>
> return 0;
> }
> @@ -667,18 +680,27 @@ static int ov9640_probe(struct i2c_client *client,
> const struct i2c_device_id *did)
> {
> struct ov9640_priv *priv;
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> int ret;
>
> - if (!ssdd) {
> - dev_err(&client->dev, "Missing platform_data for driver\n");
> - return -EINVAL;
> - }
> -
> - priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
> + priv = devm_kzalloc(&client->dev, sizeof(*priv),
> + GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
>
> + priv->gpio_power = devm_gpiod_get(&client->dev, "Camera power",
> + GPIOD_OUT_LOW);
> + if (IS_ERR_OR_NULL(priv->gpio_power)) {
> + ret = PTR_ERR(priv->gpio_power);
> + return ret;
> + }
> +
> + priv->gpio_reset = devm_gpiod_get(&client->dev, "Camera reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR_OR_NULL(priv->gpio_reset)) {
> + ret = PTR_ERR(priv->gpio_reset);
> + return ret;
> + }
> +
> v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
>
> v4l2_ctrl_handler_init(&priv->hdl, 2);
> @@ -692,17 +714,25 @@ static int ov9640_probe(struct i2c_client *client,
>
> priv->clk = v4l2_clk_get(&client->dev, "mclk");
> if (IS_ERR(priv->clk)) {
> - ret = PTR_ERR(priv->clk);
> + ret = -EPROBE_DEFER;
Why are you forcing EPROBE_DEFER instead of returning the clk_get()
return value?
Thanks
j
> goto eclkget;
> }
>
> ret = ov9640_video_probe(client);
> - if (ret) {
> - v4l2_clk_put(priv->clk);
> -eclkget:
> - v4l2_ctrl_handler_free(&priv->hdl);
> - }
> + if (ret)
> + goto eprobe;
>
> + priv->subdev.dev = &client->dev;
> + ret = v4l2_async_register_subdev(&priv->subdev);
> + if (ret)
> + goto eprobe;
> +
> + return 0;
> +
> +eprobe:
> + v4l2_clk_put(priv->clk);
> +eclkget:
> + v4l2_ctrl_handler_free(&priv->hdl);
> return ret;
> }
>
> @@ -712,7 +742,7 @@ static int ov9640_remove(struct i2c_client *client)
> struct ov9640_priv *priv = to_ov9640_sensor(sd);
>
> v4l2_clk_put(priv->clk);
> - v4l2_device_unregister_subdev(&priv->subdev);
> + v4l2_async_unregister_subdev(&priv->subdev);
> v4l2_ctrl_handler_free(&priv->hdl);
> return 0;
> }
> diff --git a/drivers/media/i2c/ov9640.h b/drivers/media/i2c/ov9640.h
> index 65d13ff17536..be5e4b29ac69 100644
> --- a/drivers/media/i2c/ov9640.h
> +++ b/drivers/media/i2c/ov9640.h
> @@ -200,6 +200,8 @@ struct ov9640_priv {
> struct v4l2_subdev subdev;
> struct v4l2_ctrl_handler hdl;
> struct v4l2_clk *clk;
> + struct gpio_desc *gpio_power;
> + struct gpio_desc *gpio_reset;
>
> int model;
> int revision;
> --
> 2.18.0
>
Attachment:
signature.asc
Description: PGP signature
