Hi Laurent,
On 08/08/18 23:59, Laurent Pinchart wrote:
> Hi Kieran,
>
> Thank you for the patch.
>
> On Wednesday, 8 August 2018 20:31:28 EEST Kieran Bingham wrote:
>> The ADV748x supports configurable slave addresses for its I2C pages.
>> Document the page names, and example for setting each of the pages
>> excplicitly.
s/excplicitly/explicitly/
>>
>> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/media/i2c/adv748x.txt | 10 +++++++++-
>> 1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
>> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index
>> 21ffb5ed8183..9515d8ad0e31 100644
>> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
>> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
>> @@ -18,6 +18,11 @@ Optional Properties:
>> "intrq3". All interrupts are optional. The "intrq3" interrupt
>> is only available on the adv7481
>> - interrupts: Specify the interrupt lines for the ADV748x
>> + - reg-names : Names of maps with programmable addresses.
>> + It can contain any map needed a non-default address.
>
> s/can contain any map needed/shall contain all maps needing/
>
>> + Possible map names are:
>> + "main", "dpll", "cp", "hdmi", "edid", "repeater",
>> + "infoframe", "cbus", "cec", "sdp", "txa", "txb"
>
> Should you also update the description of the reg property, possibly with the
> same text as the adv7604 bindings ?
Ah yes - I had missed this part which should be added:
- reg: I2C slave addresses
The ADV748xx has up to twelve 256-byte maps that can be accessed via the
main I2C ports. Each map has it own I2C address and acts as a standard
slave device on the I2C bus. The main address is mandatory, others are
optional and revert to defaults if not specified.
>> The device node must contain one 'port' child node per device input and
>> output port, in accordance with the video interface bindings defined in
>> @@ -47,7 +52,10 @@ Example:
>>
>> video-receiver@70 {
>> compatible = "adi,adv7482";
>> - reg = <0x70>;
>> + reg = <0x70 0x71 0x72 0x73 0x74 0x75
>> + 0x60 0x61 0x62 0x63 0x64 0x65>;
>> + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
>> + "infoframe", "cbus", "cec", "sdp", "txa", "txb";
>>
>> #address-cells = <1>;
>> #size-cells = <0>;
>
--
Regards
--
Kieran
