Hi Kieran, Thank you for the patch. On Tuesday, 17 July 2018 23:35:52 EEST Kieran Bingham wrote: > From: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > > Calculate the top and bottom fields for the interlaced frames and > utilise the extended display list command feature to implement the > auto-field operations. This allows the DU to update the VSP2 registers > dynamically based upon the currently processing field. > > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > > --- > > v2: > - fix erroneous BIT value which enabled interlaced > - fix field handling at frame_end interrupt > > v3: > - Pass DL through partition calls to allow autocmd's to be retrieved > - Document interlaced field in struct vsp1_du_atomic_config > > v5: > - Obtain autofld cmd in vsp1_rpf_configure_autofld() > - Move VSP1_DL_EXT_AUTOFLD_INT to vsp1_regs.h > - Rename VSP1_DL_EXT_AUTOFLD_INT -> VI6_DL_EXT_AUTOFLD_INT > - move interlaced configuration parameter to pipe object > - autofld: Set cmd->flags in one single expression. > > drivers/media/platform/vsp1/vsp1_dl.c | 10 ++++- > drivers/media/platform/vsp1/vsp1_drm.c | 16 +++++- > drivers/media/platform/vsp1/vsp1_pipe.h | 2 +- > drivers/media/platform/vsp1/vsp1_regs.h | 3 +- > drivers/media/platform/vsp1/vsp1_rpf.c | 72 ++++++++++++++++++++++++-- > include/media/vsp1.h | 2 +- > 6 files changed, 100 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/platform/vsp1/vsp1_dl.c > b/drivers/media/platform/vsp1/vsp1_dl.c index d5b3c24d160c..4963acac73f8 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_dl.c > +++ b/drivers/media/platform/vsp1/vsp1_dl.c > @@ -946,6 +946,8 @@ void vsp1_dl_list_commit(struct vsp1_dl_list *dl, bool > internal) */ > unsigned int vsp1_dlm_irq_frame_end(struct vsp1_dl_manager *dlm) > { > + struct vsp1_device *vsp1 = dlm->vsp1; > + u32 status = vsp1_read(vsp1, VI6_STATUS); > unsigned int flags = 0; > > spin_lock(&dlm->lock); > @@ -971,6 +973,14 @@ unsigned int vsp1_dlm_irq_frame_end(struct > vsp1_dl_manager *dlm) goto done; > > /* > + * Progressive streams report only TOP fields. If we have a BOTTOM > + * field, we are interlaced, and expect the frame to complete on the > + * next frame end interrupt. > + */ > + if (status & VI6_STATUS_FLD_STD(dlm->index)) > + goto done; > + > + /* > * The device starts processing the queued display list right after the > * frame end interrupt. The display list thus becomes active. > */ > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c > b/drivers/media/platform/vsp1/vsp1_drm.c index a16856856789..efdc9a676728 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_drm.c > +++ b/drivers/media/platform/vsp1/vsp1_drm.c > @@ -671,8 +671,20 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int > pipe_index, drm_pipe->width = cfg->width; > drm_pipe->height = cfg->height; > > - dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n", > - __func__, pipe_index, cfg->width, cfg->height); > + if (cfg->interlaced && !vsp1_feature(vsp1, VSP1_HAS_EXT_DL)) { > + /* > + * Interlaced support requires extended display lists to > + * provide the auto-fld feature with the DU. > + */ > + dev_dbg(vsp1->dev, "Interlaced unsupported on this pipeline\n"); > + return -EINVAL; > + } As mentioned in the v4 review, this check should be moved to the DRM driver, in the atomic check handler. > + > + pipe->interlaced = cfg->interlaced; > + > + dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u%s\n", > + __func__, pipe_index, cfg->width, cfg->height, > + pipe->interlaced ? "i" : ""); > > mutex_lock(&vsp1->drm->lock); > > diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h > b/drivers/media/platform/vsp1/vsp1_pipe.h index 743d8f0db45c..ae646c9ef337 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_pipe.h > +++ b/drivers/media/platform/vsp1/vsp1_pipe.h > @@ -104,6 +104,7 @@ struct vsp1_partition { > * @entities: list of entities in the pipeline > * @stream_config: cached stream configuration for video pipelines > * @configured: when false the @stream_config shall be written to the > hardware + * @interlaced: True when the pipeline is configured in > interlaced mode * @partitions: The number of partitions used to process one > frame * @partition: The current partition for configuration to process * > @part_table: The pre-calculated partitions used by the pipeline @@ -142,6 > +143,7 @@ struct vsp1_pipeline { > > struct vsp1_dl_body *stream_config; > bool configured; > + bool interlaced; > > unsigned int partitions; > struct vsp1_partition *partition; > diff --git a/drivers/media/platform/vsp1/vsp1_regs.h > b/drivers/media/platform/vsp1/vsp1_regs.h index 5ea9f9070cf3..3738ff2f7b85 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_regs.h > +++ b/drivers/media/platform/vsp1/vsp1_regs.h > @@ -28,6 +28,7 @@ > #define VI6_SRESET_SRTS(n) (1 << (n)) > > #define VI6_STATUS 0x0038 > +#define VI6_STATUS_FLD_STD(n) (1 << ((n) + 28)) > #define VI6_STATUS_SYS_ACT(n) (1 << ((n) + 8)) > > #define VI6_WPF_IRQ_ENB(n) (0x0048 + (n) * 12) > @@ -80,6 +81,8 @@ > #define VI6_DL_EXT_CTRL_EXPRI (1 << 4) > #define VI6_DL_EXT_CTRL_EXT (1 << 0) > > +#define VI6_DL_EXT_AUTOFLD_INT BIT(0) > + > #define VI6_DL_BODY_SIZE 0x0120 > #define VI6_DL_BODY_SIZE_UPD (1 << 24) > #define VI6_DL_BODY_SIZE_BS_MASK (0x1ffff << 0) > diff --git a/drivers/media/platform/vsp1/vsp1_rpf.c > b/drivers/media/platform/vsp1/vsp1_rpf.c index 69e5fe6e6b50..c728c193e09c > 100644 > --- a/drivers/media/platform/vsp1/vsp1_rpf.c > +++ b/drivers/media/platform/vsp1/vsp1_rpf.c > @@ -20,6 +20,18 @@ > #define RPF_MAX_WIDTH 8190 > #define RPF_MAX_HEIGHT 8190 > > +/* Pre extended display list command data structure. */ > +struct vsp1_extcmd_auto_fld_body { > + u32 top_y0; > + u32 bottom_y0; > + u32 top_c0; > + u32 bottom_c0; > + u32 top_c1; > + u32 bottom_c1; > + u32 reserved0; > + u32 reserved1; > +}; > + > /* > --------------------------------------------------------------------------- > -- * Device Access > */ > @@ -64,6 +76,14 @@ static void rpf_configure_stream(struct vsp1_entity > *entity, pstride |= format->plane_fmt[1].bytesperline > << VI6_RPF_SRCM_PSTRIDE_C_SHIFT; > > + /* > + * pstride has both STRIDE_Y and STRIDE_C, but multiplying the whole > + * of pstride by 2 is conveniently OK here as we are multiplying both > + * values. > + */ > + if (pipe->interlaced) > + pstride *= 2; > + > vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_PSTRIDE, pstride); > > /* Format */ > @@ -100,6 +120,9 @@ static void rpf_configure_stream(struct vsp1_entity > *entity, top = compose->top; > } > > + if (pipe->interlaced) > + top /= 2; > + > vsp1_rpf_write(rpf, dlb, VI6_RPF_LOC, > (left << VI6_RPF_LOC_HCOORD_SHIFT) | > (top << VI6_RPF_LOC_VCOORD_SHIFT)); > @@ -169,6 +192,36 @@ static void rpf_configure_stream(struct vsp1_entity > *entity, > > } > > +static void vsp1_rpf_configure_autofld(struct vsp1_rwpf *rpf, > + struct vsp1_dl_list *dl) > +{ > + const struct v4l2_pix_format_mplane *format = &rpf->format; > + struct vsp1_dl_ext_cmd *cmd; > + struct vsp1_extcmd_auto_fld_body *auto_fld; > + u32 offset_y, offset_c; > + > + cmd = vsp1_dl_get_pre_cmd(dl); > + if (WARN_ONCE(!cmd, "Failed to obtain an autofld cmd")) > + return; > + > + /* Re-index our auto_fld to match the current RPF. */ > + auto_fld = cmd->data; > + auto_fld = &auto_fld[rpf->entity.index]; > + > + auto_fld->top_y0 = rpf->mem.addr[0]; > + auto_fld->top_c0 = rpf->mem.addr[1]; > + auto_fld->top_c1 = rpf->mem.addr[2]; > + > + offset_y = format->plane_fmt[0].bytesperline; > + offset_c = format->plane_fmt[1].bytesperline; > + > + auto_fld->bottom_y0 = rpf->mem.addr[0] + offset_y; > + auto_fld->bottom_c0 = rpf->mem.addr[1] + offset_c; > + auto_fld->bottom_c1 = rpf->mem.addr[2] + offset_c; > + > + cmd->flags |= VI6_DL_EXT_AUTOFLD_INT | BIT(16 + rpf->entity.index); > +} > + > static void rpf_configure_frame(struct vsp1_entity *entity, > struct vsp1_pipeline *pipe, > struct vsp1_dl_list *dl, > @@ -221,6 +274,11 @@ static void rpf_configure_partition(struct vsp1_entity > *entity, crop.left += pipe->partition->rpf.left; > } > > + if (pipe->interlaced) { > + crop.height = round_down(crop.height / 2, fmtinfo->vsub); > + crop.top = round_down(crop.top / 2, fmtinfo->vsub); > + } > + > vsp1_rpf_write(rpf, dlb, VI6_RPF_SRC_BSIZE, > (crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) | > (crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT)); > @@ -249,9 +307,17 @@ static void rpf_configure_partition(struct vsp1_entity > *entity, fmtinfo->swap_uv) > swap(mem.addr[1], mem.addr[2]); > > - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]); > - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]); > - vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]); > + /* > + * Interlaced pipelines will use the extended pre-cmd to process > + * SRCM_ADDR_{Y,C0,C1} > + */ > + if (pipe->interlaced) { > + vsp1_rpf_configure_autofld(rpf, dl); > + } else { > + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_Y, mem.addr[0]); > + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C0, mem.addr[1]); > + vsp1_rpf_write(rpf, dlb, VI6_RPF_SRCM_ADDR_C1, mem.addr[2]); > + } > } > > static void rpf_partition(struct vsp1_entity *entity, > diff --git a/include/media/vsp1.h b/include/media/vsp1.h > index 678c24de1ac6..3093b9cb9067 100644 > --- a/include/media/vsp1.h > +++ b/include/media/vsp1.h > @@ -25,6 +25,7 @@ int vsp1_du_init(struct device *dev); > * struct vsp1_du_lif_config - VSP LIF configuration > * @width: output frame width > * @height: output frame height > + * @interlaced: true for interlaced pipelines > * @callback: frame completion callback function (optional). When a > callback * is provided, the VSP driver guarantees that it will be > called once * and only once for each vsp1_du_atomic_flush() call. > @@ -33,6 +34,7 @@ int vsp1_du_init(struct device *dev); > struct vsp1_du_lif_config { > unsigned int width; > unsigned int height; > + bool interlaced; > > void (*callback)(void *data, bool completed, u32 crc); > void *callback_data; -- Regards, Laurent Pinchart