As we don't need anymore to share pad numbers with similar
drivers, use its own pad definition instead of a global
model.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
drivers/media/i2c/tvp5150.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 5037a03b5442..a9f7c70ca25c 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -38,10 +38,16 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)");
#define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
+enum tvp5150_pads {
+ TVP5150_PAD_IF_INPUT,
+ TVP5150_PAD_VID_OUT,
+ TVP5150_NUM_PADS
+};
+
struct tvp5150 {
struct v4l2_subdev sd;
#ifdef CONFIG_MEDIA_CONTROLLER
- struct media_pad pads[DEMOD_NUM_PADS];
+ struct media_pad pads[TVP5150_NUM_PADS];
struct media_entity input_ent[TVP5150_INPUT_NUM];
struct media_pad input_pad[TVP5150_INPUT_NUM];
#endif
@@ -866,7 +872,7 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *f;
struct tvp5150 *decoder = to_tvp5150(sd);
- if (!format || (format->pad != DEMOD_PAD_VID_OUT))
+ if (!format || (format->pad != TVP5150_PAD_VID_OUT))
return -EINVAL;
f = &format->format;
@@ -1217,7 +1223,7 @@ static int tvp5150_registered(struct v4l2_subdev *sd)
return ret;
ret = media_create_pad_link(input, 0, &sd->entity,
- DEMOD_PAD_IF_INPUT, 0);
+ TVP5150_PAD_IF_INPUT, 0);
if (ret < 0) {
media_device_unregister_entity(input);
return ret;
@@ -1499,14 +1505,14 @@ static int tvp5150_probe(struct i2c_client *c,
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
#if defined(CONFIG_MEDIA_CONTROLLER)
- core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
- core->pads[DEMOD_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
- core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
- core->pads[DEMOD_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
+ core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
+ core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
- res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
+ res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads);
if (res < 0)
return res;
--
2.17.1
