This is the soc_camera support developed by Sascha Hauer.
I just modified original driver to get it working on recent kernel.
Signed-off-by: Alan Carvalho de Assis <acassis@xxxxxxxxx>
---
arch/arm/mach-mx2/clock_imx27.c | 2 +-
arch/arm/mach-mx2/devices.c | 32 +
arch/arm/mach-mx2/devices.h | 1 +
arch/arm/plat-mxc/include/mach/imx_cam.h | 47 ++
drivers/media/video/Kconfig | 13 +
drivers/media/video/Makefile | 3 +
drivers/media/video/mx27_camera.c | 1224 ++++++++++++++++++++++++++++++
7 files changed, 1321 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/plat-mxc/include/mach/imx_cam.h
create mode 100644 drivers/media/video/mx27_camera.c
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index b010bf9..1ad0408 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -642,7 +642,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK(NULL, "csi", csi_clk)
+ _REGISTER_CLOCK("mx27-camera.0", NULL, csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 3d398ce..d47ea55 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -39,6 +40,37 @@
#include "devices.h"
+#ifdef CONFIG_MACH_MX27
+static struct resource mx27_camera_resources[] = {
+ {
+ .start = CSI_BASE_ADDR,
+ .end = CSI_BASE_ADDR + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = EMMA_PRP_BASE_ADDR,
+ .end = EMMA_PRP_BASE_ADDR + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_CSI,
+ .end = MXC_INT_CSI,
+ .flags = IORESOURCE_IRQ,
+ },{
+ .start = MXC_INT_EMMAPRP,
+ .end = MXC_INT_EMMAPRP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+struct platform_device mx27_camera_device = {
+ .name = "mx27-camera",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mx27_camera_resources),
+ .resource = mx27_camera_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+#endif
+
/*
* SPI master controller
*
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 97306aa..58ce4dc 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -20,6 +20,7 @@ extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mx27_camera_device;
extern struct platform_device mxc_otg_host;
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
diff --git a/arch/arm/plat-mxc/include/mach/imx_cam.h b/arch/arm/plat-mxc/include/mach/imx_cam.h
new file mode 100644
index 0000000..2d704ae
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/imx_cam.h
@@ -0,0 +1,47 @@
+/*
+ imx-cam.h - i.MX27 camera driver header file
+
+ Copyright (C) 2003, Intel Corporation
+ Copyright (C) 2008, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define MX27_CAMERA_SWAP16 (1 << 0)
+#define MX27_CAMERA_EXT_VSYNC (1 << 1)
+#define MX27_CAMERA_CCIR (1 << 2)
+#define MX27_CAMERA_CCIR_INTERLACE (1 << 3)
+#define MX27_CAMERA_HSYNC_HIGH (1 << 4)
+#define MX27_CAMERA_GATED_CLOCK (1 << 5)
+#define MX27_CAMERA_INV_DATA (1 << 6)
+#define MX27_CAMERA_PCLK_SAMPLE_RISING (1 << 7)
+#define MX27_CAMERA_PACK_DIR_MSB (1 << 8)
+
+struct mx27_camera_platform_data {
+ int (*init)(struct platform_device *);
+ int (*exit)(struct platform_device *);
+
+ unsigned long flags;
+
+ unsigned long clk;
+};
+
+extern int mx27_init_camera(struct mx27_camera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
+
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index e6186b3..8c7c826 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -909,6 +909,19 @@ config VIDEO_OMAP2
---help---
This is a v4l2 driver for the TI OMAP2 camera capture interface
+config MX2_VIDEO
+ bool
+
+config VIDEO_MX27
+ tristate "i.MX27 Quick Capture Interface driver"
+ depends on VIDEO_DEV && MACH_MX27
+ select SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ select MX2_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX27 Capture Interface
+
+
#
# USB Multimedia device configuration
#
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index e541932..b720c0e 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -118,6 +118,8 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
+obj-$(CONFIG_VIDEO_MXC_IPU_CAMERA) += mxc/capture/
+
obj-$(CONFIG_USB_DABUSB) += dabusb.o
obj-$(CONFIG_USB_OV511) += ov511.o
obj-$(CONFIG_USB_SE401) += se401.o
@@ -152,6 +154,7 @@ obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o
# soc-camera host drivers have to be linked after camera drivers
obj-$(CONFIG_VIDEO_MX1) += mx1_camera.o
obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o
+obj-$(CONFIG_VIDEO_MX27) += mx27_camera.o
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
diff --git a/drivers/media/video/mx27_camera.c b/drivers/media/video/mx27_camera.c
new file mode 100644
index 0000000..426fcf4
--- /dev/null
+++ b/drivers/media/video/mx27_camera.c
@@ -0,0 +1,1224 @@
+/*
+ * V4L2 Driver for MX27 camera host
+ *
+ * Copyright (C) 2008, Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/time.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/soc_camera.h>
+
+#include <linux/videodev2.h>
+
+#include <mach/imx_cam.h>
+#include <asm/dma.h>
+#include <mach/dma-mx1-mx2.h>
+
+#include <asm/dma.h>
+
+#define MX27_CAM_DRV_NAME "mx27-camera"
+#define MX27_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) /* FIXME: Whats this? */
+
+static const char *mx27_cam_driver_description = "i.MX27_Camera";
+
+/* reset values */
+#define CSICR1_RESET_VAL 0x40000800
+#define CSICR2_RESET_VAL 0x0
+#define CSICR3_RESET_VAL 0x0
+
+/* csi control reg 1 */
+#define CSICR1_SWAP16_EN (1 << 31)
+#define CSICR1_EXT_VSYNC (1 << 30)
+#define CSICR1_EOF_INTEN (1 << 29)
+#define CSICR1_PRP_IF_EN (1 << 28)
+#define CSICR1_CCIR_MODE (1 << 27)
+#define CSICR1_COF_INTEN (1 << 26)
+#define CSICR1_SF_OR_INTEN (1 << 25)
+#define CSICR1_RF_OR_INTEN (1 << 24)
+#define CSICR1_STATFF_LEVEL (3 << 22)
+#define CSICR1_STATFF_INTEN (1 << 21)
+#define CSICR1_RXFF_LEVEL(l) (((l) & 3) << 19)
+#define CSICR1_RXFF_INTEN (1 << 18)
+#define CSICR1_SOF_POL (1 << 17)
+#define CSICR1_SOF_INTEN (1 << 16)
+#define CSICR1_MCLKDIV(d) (((d) & 0xF) << 12)
+#define CSICR1_HSYNC_POL (1 << 11)
+#define CSICR1_CCIR_EN (1 << 10)
+#define CSICR1_MCLKEN (1 << 9)
+#define CSICR1_FCC (1 << 8)
+#define CSICR1_PACK_DIR (1 << 7)
+#define CSICR1_CLR_STATFIFO (1 << 6)
+#define CSICR1_CLR_RXFIFO (1 << 5)
+#define CSICR1_GCLK_MODE (1 << 4)
+#define CSICR1_INV_DATA (1 << 3)
+#define CSICR1_INV_PCLK (1 << 2)
+#define CSICR1_REDGE (1 << 1)
+
+#define SHIFT_STATFF_LEVEL 22
+#define SHIFT_RXFF_LEVEL 19
+#define SHIFT_MCLKDIV 12
+
+/* control reg 3 */
+#define CSICR3_FRMCNT (0xFFFF << 16)
+#define CSICR3_FRMCNT_RST (1 << 15)
+#define CSICR3_CSI_SUP (1 << 3)
+#define CSICR3_ZERO_PACK_EN (1 << 2)
+#define CSICR3_ECC_INT_EN (1 << 1)
+#define CSICR3_ECC_AUTO_EN (1 << 0)
+
+#define SHIFT_FRMCNT 16
+
+/* csi status reg */
+#define CSISR_SFF_OR_INT (1 << 25)
+#define CSISR_RFF_OR_INT (1 << 24)
+#define CSISR_STATFF_INT (1 << 21)
+#define CSISR_RXFF_INT (1 << 18)
+#define CSISR_EOF_INT (1 << 17)
+#define CSISR_SOF_INT (1 << 16)
+#define CSISR_F2_INT (1 << 15)
+#define CSISR_F1_INT (1 << 14)
+#define CSISR_COF_INT (1 << 13)
+#define CSISR_ECC_INT (1 << 1)
+#define CSISR_DRDY (1 << 0)
+
+#define CSICR1 0x00
+#define CSICR2 0x04
+#define CSISR 0x08
+#define CSISTATFIFO 0x0c
+#define CSIRFIFO 0x10
+#define CSIRXCNT 0x14
+#define CSICR3 0x1C
+
+/* EMMA PrP */
+#define PRP_CNTL 0x00
+#define PRP_INTR_CNTL 0x04
+#define PRP_INTRSTATUS 0x08
+#define PRP_SOURCE_Y_PTR 0x0c
+#define PRP_SOURCE_CB_PTR 0x10
+#define PRP_SOURCE_CR_PTR 0x14
+#define PRP_DEST_RGB1_PTR 0x18
+#define PRP_DEST_RGB2_PTR 0x1c
+#define PRP_DEST_Y_PTR 0x20
+#define PRP_DEST_CB_PTR 0x24
+#define PRP_DEST_CR_PTR 0x28
+#define PRP_SRC_FRAME_SIZE 0x2c
+#define PRP_DEST_CH1_LINE_STRIDE 0x30
+#define PRP_SRC_PIXEL_FORMAT_CNTL 0x34
+#define PRP_CH1_PIXEL_FORMAT_CNTL 0x38
+#define PRP_CH1_OUT_IMAGE_SIZE 0x3c
+#define PRP_CH2_OUT_IMAGE_SIZE 0x40
+#define PRP_SRC_LINE_STRIDE 0x44
+#define PRP_CSC_COEF_012 0x48
+#define PRP_CSC_COEF_345 0x4c
+#define PRP_CSC_COEF_678 0x50
+#define PRP_CH1_RZ_HORI_COEF1 0x54
+#define PRP_CH1_RZ_HORI_COEF2 0x58
+#define PRP_CH1_RZ_HORI_VALID 0x5c
+#define PRP_CH1_RZ_VERT_COEF1 0x60
+#define PRP_CH1_RZ_VERT_COEF2 0x64
+#define PRP_CH1_RZ_VERT_VALID 0x68
+#define PRP_CH2_RZ_HORI_COEF1 0x6c
+#define PRP_CH2_RZ_HORI_COEF2 0x70
+#define PRP_CH2_RZ_HORI_VALID 0x74
+#define PRP_CH2_RZ_VERT_COEF1 0x78
+#define PRP_CH2_RZ_VERT_COEF2 0x7c
+#define PRP_CH2_RZ_VERT_VALID 0x80
+
+#define PRP_CNTL_CH1EN (1 << 0)
+#define PRP_CNTL_CH2EN (1 << 1)
+#define PRP_CNTL_CSIEN (1 << 2)
+#define PRP_CNTL_DATA_IN_YUV420 (0 << 3)
+#define PRP_CNTL_DATA_IN_YUV422 (1 << 3)
+#define PRP_CNTL_DATA_IN_RGB16 (2 << 3)
+#define PRP_CNTL_DATA_IN_RGB32 (3 << 3)
+#define PRP_CNTL_CH1_OUT_RGB8 (0 << 5)
+#define PRP_CNTL_CH1_OUT_RGB16 (1 << 5)
+#define PRP_CNTL_CH1_OUT_RGB32 (2 << 5)
+#define PRP_CNTL_CH1_OUT_YUV422 (3 << 5)
+#define PRP_CNTL_CH2_OUT_YUV420 (0 << 7)
+#define PRP_CNTL_CH2_OUT_YUV422 (1 << 7)
+#define PRP_CNTL_CH2_OUT_YUV444 (2 << 7)
+#define PRP_CNTL_CH1_LEN (1 << 9)
+#define PRP_CNTL_CH2_LEN (1 << 10)
+#define PRP_CNTL_SKIP_FRAME (1 << 11)
+#define PRP_CNTL_SWRST (1 << 12)
+#define PRP_CNTL_CLKEN (1 << 13)
+#define PRP_CNTL_WEN (1 << 14)
+#define PRP_CNTL_CH1BYP (1 << 15)
+#define PRP_CNTL_IN_TSKIP(x) ((x) << 16)
+#define PRP_CNTL_CH1_TSKIP(x) ((x) << 19)
+#define PRP_CNTL_CH2_TSKIP(x) ((x) << 22)
+#define PRP_CNTL_INPUT_FIFO_LEVEL(x) ((x) << 25)
+#define PRP_CNTL_RZ_FIFO_LEVEL(x) ((x) << 27)
+#define PRP_CNTL_CH2B1EN (1 << 29)
+#define PRP_CNTL_CH2B2EN (1 << 30)
+#define PRP_CNTL_CH2FEN (1 << 31)
+
+/* IRQ Enable and status register */
+#define PRP_INTR_RDERR (1 << 0)
+#define PRP_INTR_CH1WERR (1 << 1)
+#define PRP_INTR_CH2WERR (1 << 2)
+#define PRP_INTR_CH1FC (1 << 3)
+#define PRP_INTR_CH2FC (1 << 5)
+#define PRP_INTR_LBOVF (1 << 7)
+#define PRP_INTR_CH2OVF (1 << 8)
+
+#define mx27_camera_emma(pcdev) (pcdev->use_emma)
+
+/* Currently we do not need irqs. All we need is DMA callback
+ * Leave it here for reference for some time.
+ */
+#undef MX27_CAMERA_USE_IRQ
+
+struct mx27_camera_dev {
+ struct device *dev;
+ struct soc_camera_device *icd;
+ struct clk *clk_csi, *clk_emma;
+
+ unsigned int irq_csi, irq_emma;
+ void __iomem *base_csi, *base_emma;
+
+ struct mx27_camera_platform_data *pdata;
+ struct resource *res_csi, *res_emma;
+ unsigned long platform_flags;
+
+ struct list_head capture;
+ struct list_head active_bufs;
+
+ spinlock_t lock;
+
+ int dma;
+ struct mx27_buffer *active;
+
+ int use_emma;
+
+ unsigned int csicr1;
+
+ void __iomem *discard_buffer;
+ dma_addr_t discard_buffer_dma;
+ size_t discard_size;
+};
+
+/* buffer for one video frame */
+struct mx27_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct videobuf_buffer vb;
+
+ const struct soc_camera_data_format *fmt;
+
+ int bufnum;
+};
+
+static DEFINE_MUTEX(camera_lock);
+
+static int mclk_get_divisor(struct mx27_camera_dev *pcdev)
+{
+ dev_info(pcdev->dev, "%s not implemented. Running at max speed\n",
+ __func__);
+
+#if 0
+ unsigned int mclk = pcdev->pdata->clk_csi;
+ unsigned int pclk = clk_get_rate(pcdev->clk_csi);
+ int i;
+
+ dev_dbg(pcdev->dev, "%s: %ld %ld\n", __func__, mclk, pclk);
+
+ for (i = 0; i < 0xf; i++)
+ if ((i + 1) * 2 * mclk <= pclk)
+ break;
+ return i;
+#endif
+ return 0;
+}
+
+static void mx27_camera_deactivate(struct mx27_camera_dev *pcdev)
+{
+ clk_disable(pcdev->clk_csi);
+ writel(0, pcdev->base_csi + CSICR1);
+ if (mx27_camera_emma(pcdev))
+ writel(0, pcdev->base_emma + PRP_CNTL);
+}
+
+/* The following two functions absolutely depend on the fact, that
+ * there can be only one camera on mx27 quick capture interface */
+static int mx27_camera_add_device(struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx27_camera_dev *pcdev = ici->priv;
+ int ret;
+ u32 csicr1;
+
+ mutex_lock(&camera_lock);
+
+ if (pcdev->icd) {
+ ret = -EBUSY;
+ goto ebusy;
+ }
+
+ dev_info(&icd->dev, "Camera driver attached to camera %d\n",
+ icd->devnum);
+
+ clk_enable(pcdev->clk_csi);
+
+ csicr1 = CSICR1_MCLKDIV(mclk_get_divisor(pcdev)) |
+ CSICR1_MCLKEN;
+ if (mx27_camera_emma(pcdev)) {
+ csicr1 |= CSICR1_PRP_IF_EN | CSICR1_FCC |
+ CSICR1_RXFF_LEVEL(0);
+ } else
+ csicr1 |= CSICR1_SOF_INTEN | CSICR1_RXFF_LEVEL(2);
+
+ pcdev->csicr1 = csicr1;
+ writel(pcdev->csicr1, pcdev->base_csi + CSICR1);
+
+ pcdev->icd = icd;
+
+ebusy:
+ mutex_unlock(&camera_lock);
+
+ return ret;
+}
+
+static void mx27_camera_remove_device(struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx27_camera_dev *pcdev = ici->priv;
+
+ BUG_ON(icd != pcdev->icd);
+
+ dev_info(&icd->dev, "Camera driver detached from camera %d\n",
+ icd->devnum);
+
+ mx27_camera_deactivate(pcdev);
+
+ if (pcdev->discard_buffer) {
+ dma_free_coherent(NULL, pcdev->discard_size,
+ pcdev->discard_buffer,
+ pcdev->discard_buffer_dma);
+ }
+ pcdev->discard_buffer = 0;
+
+ pcdev->icd = NULL;
+}
+
+static void mx27_camera_dma_enable(struct mx27_camera_dev *pcdev)
+{
+ u32 tmp;
+
+ imx_dma_enable(pcdev->dma);
+
+ tmp = readl(pcdev->base_csi + CSICR1);
+ tmp |= CSICR1_RF_OR_INTEN;
+ writel(tmp, pcdev->base_csi + CSICR1);
+}
+
+static irqreturn_t mx27_camera_irq(int irq_csi, void *data)
+{
+ struct mx27_camera_dev *pcdev = data;
+ u32 status = readl(pcdev->base_csi + CSISR);
+
+ if (status & CSISR_SOF_INT && pcdev->active) {
+ u32 tmp;
+
+ tmp = readl(pcdev->base_csi + CSICR1);
+ tmp |= CSICR1_CLR_RXFIFO;
+ writel(tmp, pcdev->base_csi + CSICR1);
+ mx27_camera_dma_enable(pcdev);
+ writel(CSISR_SOF_INT | CSISR_RFF_OR_INT,
+ pcdev->base_csi + CSISR);
+ status &= ~CSISR_RFF_OR_INT;
+ }
+
+ writel(CSISR_SOF_INT | CSISR_RFF_OR_INT, pcdev->base_csi + CSISR);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int vid_limit = 16; /* Video memory limit, in Mb */
+
+/*
+ * Videobuf operations
+ */
+static int mx27_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
+ unsigned int *size)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+
+ dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
+
+ *size = icd->user_width * icd->user_height *
+ ((icd->current_fmt->depth + 7) >> 3);
+
+ if (0 == *count)
+ *count = 32;
+ while (*size * *count > vid_limit * 1024 * 1024)
+ (*count)--;
+
+ return 0;
+}
+
+static void free_buffer(struct videobuf_queue *vq, struct mx27_buffer *buf)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+
+ BUG_ON(in_interrupt());
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ &buf->vb, buf->vb.baddr, buf->vb.bsize);
+
+ /* This waits until this buffer is out of danger, i.e., until it is no
+ * longer in STATE_QUEUED or STATE_ACTIVE */
+ videobuf_waiton(&buf->vb, 0, 0);
+
+ videobuf_dma_contig_free(vq, &buf->vb);
+ dev_dbg(&icd->dev, "%s freed\n", __func__);
+
+ buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int mx27_videobuf_prepare(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb, enum v4l2_field field)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct mx27_buffer *buf = container_of(vb, struct mx27_buffer, vb);
+ int ret = 0;
+
+#ifdef DEBUG
+ /* This can be useful if you want to see if we actually fill
+ * the buffer with something */
+ memset((void *)vb->baddr, 0xaa, vb->bsize);
+#endif
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ if (buf->fmt != icd->current_fmt ||
+ vb->width != icd->user_width ||
+ vb->height != icd->user_height ||
+ vb->field != field) {
+ buf->fmt = icd->current_fmt;
+ vb->width = icd->user_width;
+ vb->height = icd->user_height;
+ vb->field = field;
+ vb->state = VIDEOBUF_NEEDS_INIT;
+ }
+
+ vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3);
+ if (vb->baddr && vb->bsize < vb->size) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (vb->state == VIDEOBUF_NEEDS_INIT) {
+ ret = videobuf_iolock(vq, vb, NULL);
+ if (ret)
+ goto fail;
+
+ vb->state = VIDEOBUF_PREPARED;
+ }
+
+ return 0;
+
+fail:
+ free_buffer(vq, buf);
+out:
+ return ret;
+}
+
+#define CSI_BASE_ADDR 0x80000000 /* FIXME: get from resources */
+
+static void mx27_videobuf_queue(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct soc_camera_device *icd = vq->priv_data;
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->dev.parent);
+ struct mx27_camera_dev *pcdev = ici->priv;
+ struct mx27_buffer *buf = container_of(vb, struct mx27_buffer, vb);
+ unsigned long flags;
+ int ret;
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ if (mx27_camera_emma(pcdev)) {
+ list_add_tail(&vb->queue, &pcdev->capture);
+ vb->state = VIDEOBUF_QUEUED;
+ } else {
+ list_add_tail(&vb->queue, &pcdev->capture);
+ vb->state = VIDEOBUF_ACTIVE;
+
+ if (!pcdev->active) {
+ ret = imx_dma_setup_single(pcdev->dma,
+ videobuf_to_dma_contig(vb), vb->size,
+ CSI_BASE_ADDR + 0x10, DMA_MODE_READ);
+ if (ret) {
+ vb->state = VIDEOBUF_ERROR;
+ wake_up(&vb->done);
+ goto out;
+ }
+
+ pcdev->active = buf;
+ }
+ }
+
+out:
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx27_videobuf_release(struct videobuf_queue *vq,
+ struct videobuf_buffer *vb)
+{
+ struct mx27_buffer *buf = container_of(vb, struct mx27_buffer, vb);
+
+#ifdef DEBUG
+ struct soc_camera_device *icd = vq->priv_data;
+
+ dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ switch (vb->state) {
+ case VIDEOBUF_ACTIVE:
+ dev_info(&icd->dev, "%s (active)\n", __func__);
+ break;
+ case VIDEOBUF_QUEUED:
+ dev_info(&icd->dev, "%s (queued)\n", __func__);
+ break;
+ case VIDEOBUF_PREPARED:
+ dev_info(&icd->dev, "%s (prepared)\n", __func__);
+ break;
+ default:
+ dev_info(&icd->dev, "%s (unknown) %d\n", __func__,
+ vb->state);
+ break;
+ }
+#endif
+
+ free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops mx27_videobuf_ops = {
+ .buf_setup = mx27_videobuf_setup,
+ .buf_prepare = mx27_videobuf_prepare,
+ .buf_queue = mx27_videobuf_queue,
+ .buf_release = mx27_videobuf_release,
+};
+
+static void mx27_camera_init_videobuf(struct videobuf_queue *q,
+ struct soc_camera_device *icd)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ struct mx27_camera_dev *pcdev = ici->priv;
+
+ videobuf_queue_dma_contig_init(q, &mx27_videobuf_ops, pcdev->dev,
+ &pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ V4L2_FIELD_NONE, sizeof(struct mx27_buffer), icd);
+}
+
+#define MX27_BUS_FLAGS (SOCAM_DATAWIDTH_8 | \
+ SOCAM_MASTER | \
+ SOCAM_VSYNC_ACTIVE_HIGH | \
+ SOCAM_HSYNC_ACTIVE_HIGH | \
+ SOCAM_HSYNC_ACTIVE_LOW | \
+ SOCAM_PCLK_SAMPLE_RISING | \
+ SOCAM_PCLK_SAMPLE_FALLING | \
+ SOCAM_DATA_ACTIVE_HIGH | \
+ SOCAM_DATA_ACTIVE_LOW)
+
+
+static int mx27_camera_emma_prp_reset(struct mx27_camera_dev *pcdev)
+{
+ unsigned int cntl;
+
+ cntl = readl(pcdev->base_emma + PRP_CNTL);
+ writel(PRP_CNTL_SWRST, pcdev->base_emma + PRP_CNTL);
+ while (readl(pcdev->base_emma + PRP_CNTL) & PRP_CNTL_SWRST)
+ barrier();
+
+ return 0;
+}
+
+static int mx27_camera_set_bus_param(struct soc_camera_device *icd,
+ __u32 pixfmt)
+{
+ struct soc_camera_host *ici =
+ to_soc_camera_host(icd->dev.parent);
+ struct mx27_camera_dev *pcdev = ici->priv;
+ unsigned long camera_flags, common_flags;
+ int ret = 0;
+ u32 csicr1 = pcdev->csicr1;
+
+ camera_flags = icd->ops->query_bus_param(icd);
+
+ common_flags = soc_camera_bus_param_compatible(camera_flags,
+ MX27_BUS_FLAGS);
+ if (!common_flags)
+ return -EINVAL;
+
+ if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+ if (pcdev->platform_flags & MX27_CAMERA_HSYNC_HIGH)
+ common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+ else
+ common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+ }
+
+ if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
+ (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if (pcdev->platform_flags & MX27_CAMERA_PCLK_SAMPLE_RISING)
+ common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ else
+ common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ }
+
+ ret = icd->ops->set_bus_param(icd, common_flags);
+ if (ret < 0)
+ return ret;
+
+ if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+ csicr1 |= CSICR1_INV_PCLK;
+ if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
+ csicr1 |= CSICR1_HSYNC_POL;
+ if (pcdev->platform_flags & MX27_CAMERA_SWAP16)
+ csicr1 |= CSICR1_SWAP16_EN;
+ if (pcdev->platform_flags & MX27_CAMERA_EXT_VSYNC)
+ csicr1 |= CSICR1_EXT_VSYNC;
+ if (pcdev->platform_flags & MX27_CAMERA_CCIR)
+ csicr1 |= CSICR1_CCIR_EN;
+ if (pcdev->platform_flags & MX27_CAMERA_CCIR_INTERLACE)
+ csicr1 |= CSICR1_CCIR_MODE;
+ if (pcdev->platform_flags & MX27_CAMERA_GATED_CLOCK)
+ csicr1 |= CSICR1_GCLK_MODE;
+ if (pcdev->platform_flags & MX27_CAMERA_INV_DATA)
+ csicr1 |= CSICR1_INV_DATA;
+ if (pcdev->platform_flags & MX27_CAMERA_PACK_DIR_MSB)
+ csicr1 |= CSICR1_PACK_DIR;
+
+ if (mx27_camera_emma(pcdev)) {
+ int bytesperline = (icd->user_width * icd->current_fmt->depth) >> 3;
+
+ if (mx27_camera_emma_prp_reset(pcdev))
+ return -ENODEV;
+
+ if (pcdev->discard_buffer)
+ dma_free_coherent(NULL, pcdev->discard_size,
+ pcdev->discard_buffer,
+ pcdev->discard_buffer_dma);
+
+ /* I didn't manage to properly enable/disable the prp
+ * on a per frame basis during running transfers,
+ * thus we allocate a buffer here and use it to
+ * discard frames when no buffer is available.
+ * Feel free to work on this ;)
+ */
+ pcdev->discard_size = icd->user_height * bytesperline;
+ pcdev->discard_buffer = dma_alloc_coherent(NULL,
+ pcdev->discard_size, &pcdev->discard_buffer_dma,
+ GFP_KERNEL);
+ if (!pcdev->discard_buffer)
+ return -ENOMEM;
+
+ writel(pcdev->discard_buffer_dma,
+ pcdev->base_emma + PRP_DEST_RGB1_PTR);
+ writel(pcdev->discard_buffer_dma,
+ pcdev->base_emma + PRP_DEST_RGB2_PTR);
+
+ /* We only use the EMMA engine to get rid of the f**king
+ * DMA Engine. No color space consversion at the moment.
+ * We adjust incoming and outgoing pixelformat to rgb16
+ * and adjust the bytesperline accordingly.
+ */
+ writel(PRP_CNTL_CH1EN |
+ PRP_CNTL_CSIEN |
+ PRP_CNTL_DATA_IN_RGB16 |
+ PRP_CNTL_CH1_OUT_RGB16 |
+ PRP_CNTL_CH1_LEN |
+ PRP_CNTL_CH1BYP |
+ PRP_CNTL_CH1_TSKIP(0) |
+ PRP_CNTL_IN_TSKIP(0),
+ pcdev->base_emma + PRP_CNTL);
+
+ writel(((bytesperline >> 1) << 16) | icd->user_height,
+ pcdev->base_emma + PRP_SRC_FRAME_SIZE);
+ writel(((bytesperline >> 1) << 16) | icd->user_height,
+ pcdev->base_emma + PRP_CH1_OUT_IMAGE_SIZE);
+ writel(bytesperline,
+ pcdev->base_emma + PRP_DEST_CH1_LINE_STRIDE);
+ writel(0x2ca00565,
+ pcdev->base_emma + PRP_SRC_PIXEL_FORMAT_CNTL);
+ writel(0x2ca00565,
+ pcdev->base_emma + PRP_CH1_PIXEL_FORMAT_CNTL);
+
+ /* Enable interrupts */
+ writel(PRP_INTR_RDERR |
+ PRP_INTR_CH1WERR |
+ PRP_INTR_CH2WERR |
+ PRP_INTR_CH1FC |
+ PRP_INTR_CH2FC |
+ PRP_INTR_LBOVF |
+ PRP_INTR_CH2OVF
+ , pcdev->base_emma + PRP_INTR_CNTL);
+ }
+
+ pcdev->csicr1 = csicr1;
+
+ writel(csicr1, pcdev->base_csi + CSICR1);
+
+ return 0;
+}
+
+static int mx27_camera_set_crop(struct soc_camera_device *icd,
+ struct v4l2_crop *a)
+{
+ struct v4l2_rect *rect = &a->c;
+ //struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ //struct mx27_camera_dev *mx27_cam = ici->priv;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct v4l2_format f = {.type = V4L2_BUF_TYPE_VIDEO_CAPTURE};
+ struct v4l2_pix_format *pix = &f.fmt.pix;
+ int ret;
+
+ soc_camera_limit_side(&rect->left, &rect->width, 0, 2, 4096);
+ soc_camera_limit_side(&rect->top, &rect->height, 0, 2, 4096);
+
+ ret = v4l2_subdev_call(sd, video, s_crop, a);
+ if (ret < 0)
+ return ret;
+
+ /* The capture device might have changed its output */
+ ret = v4l2_subdev_call(sd, video, g_fmt, &f);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(icd->dev.parent, "Sensor cropped %dx%d\n",
+ pix->width, pix->height);
+
+ icd->user_width = pix->width;
+ icd->user_height = pix->height;
+
+ return ret;
+}
+
+static int mx27_camera_set_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
+ const struct soc_camera_format_xlate *xlate;
+ __u32 pixfmt = f->fmt.pix.pixelformat;
+ struct v4l2_format cam_f = *f;
+ int ret;
+
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ if (!xlate) {
+ dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt);
+ return -EINVAL;
+ }
+
+ cam_f.fmt.pix.pixelformat = xlate->cam_fmt->fourcc;
+ ret = ici->ops->set_fmt(icd, &cam_f);
+
+ if (!ret) {
+ icd->buswidth = xlate->buswidth;
+ icd->current_fmt = xlate->host_fmt;
+ }
+
+ return ret;
+}
+
+static int mx27_camera_try_fmt(struct soc_camera_device *icd,
+ struct v4l2_format *f)
+{
+ return 0;
+}
+
+static int mx27_camera_querycap(struct soc_camera_host *ici,
+ struct v4l2_capability *cap)
+{
+ /* cap->name is set by the friendly caller:-> */
+ strlcpy(cap->card, mx27_cam_driver_description, sizeof(cap->card));
+ cap->version = MX27_CAM_VERSION_CODE;
+ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+
+ return 0;
+}
+
+static int mx27_camera_reqbufs(struct soc_camera_file *icf,
+ struct v4l2_requestbuffers *p)
+{
+ int i;
+
+ for (i = 0; i < p->count; i++) {
+ struct mx27_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+ struct mx27_buffer, vb);
+ INIT_LIST_HEAD(&buf->vb.queue);
+ }
+
+ return 0;
+}
+
+static void mx27_camera_frame_done(struct mx27_camera_dev *pcdev, int state)
+{
+ struct videobuf_buffer *vb;
+ struct mx27_buffer *buf;
+ int ret;
+
+ if (!pcdev->active) {
+ dev_err(pcdev->dev, "%s called with no active buffer!\n",
+ __func__);
+ return;
+ }
+
+ vb = &pcdev->active->vb;
+ buf = container_of(vb, struct mx27_buffer, vb);
+ WARN_ON(list_empty(&vb->queue));
+ dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
+ vb, vb->baddr, vb->bsize);
+
+ /* _init is used to debug races, see comment in pxa_camera_reqbufs() */
+ list_del_init(&vb->queue);
+ vb->state = state;
+ do_gettimeofday(&vb->ts);
+ vb->field_count++;
+
+ wake_up(&vb->done);
+
+ if (list_empty(&pcdev->capture)) {
+ pcdev->active = NULL;
+ return;
+ }
+
+ pcdev->active = list_entry(pcdev->capture.next,
+ struct mx27_buffer, vb.queue);
+
+ vb = &pcdev->active->vb;
+ vb->state = VIDEOBUF_ACTIVE;
+
+ ret = imx_dma_setup_single(pcdev->dma, videobuf_to_dma_contig(vb),
+ vb->size, CSI_BASE_ADDR + 0x10, DMA_MODE_READ);
+ if (ret) {
+ vb->state = VIDEOBUF_ERROR;
+ wake_up(&vb->done);
+ return;
+ }
+}
+
+static void mx27_camera_dma_err_callback(int channel, void *data, int err)
+{
+ struct mx27_camera_dev *pcdev = data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ mx27_camera_frame_done(pcdev, VIDEOBUF_ERROR);
+
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static void mx27_camera_dma_callback(int channel, void *data)
+{
+ struct mx27_camera_dev *pcdev = data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pcdev->lock, flags);
+
+ mx27_camera_frame_done(pcdev, VIDEOBUF_DONE);
+
+ spin_unlock_irqrestore(&pcdev->lock, flags);
+}
+
+static unsigned int mx27_camera_poll(struct file *file, poll_table *pt)
+{
+ struct soc_camera_file *icf = file->private_data;
+ struct mx27_buffer *buf;
+
+ buf = list_entry(icf->vb_vidq.stream.next, struct mx27_buffer,
+ vb.stream);
+
+ poll_wait(file, &buf->vb.done, pt);
+
+ if (buf->vb.state == VIDEOBUF_DONE ||
+ buf->vb.state == VIDEOBUF_ERROR)
+ return POLLIN | POLLRDNORM;
+
+ return 0;
+}
+
+static struct soc_camera_host_ops mx27_soc_camera_host_ops = {
+ .owner = THIS_MODULE,
+ .add = mx27_camera_add_device,
+ .remove = mx27_camera_remove_device,
+ .set_fmt = mx27_camera_set_fmt,
+ .set_crop = mx27_camera_set_crop,
+ .try_fmt = mx27_camera_try_fmt,
+ .init_videobuf = mx27_camera_init_videobuf,
+ .reqbufs = mx27_camera_reqbufs,
+ .poll = mx27_camera_poll,
+ .querycap = mx27_camera_querycap,
+ .set_bus_param = mx27_camera_set_bus_param,
+};
+
+static void mx27_camera_frame_done_emma(struct mx27_camera_dev *pcdev,
+ int bufnum, int state)
+{
+ struct mx27_buffer *buf;
+ struct videobuf_buffer *vb;
+ unsigned long phys;
+
+ if (!list_empty(&pcdev->active_bufs)) {
+ buf = list_entry(pcdev->active_bufs.next,
+ struct mx27_buffer, vb.queue);
+
+ if (buf->bufnum == bufnum) {
+ vb = &buf->vb;
+#ifdef DEBUG
+ phys = videobuf_to_dma_contig(vb);
+ if (readl(pcdev->base_emma + PRP_DEST_RGB1_PTR +
+ 4 * bufnum) != phys) {
+ dev_err(pcdev->dev, "%p != %p\n", phys,
+ readl(pcdev->base_emma +
+ PRP_DEST_RGB1_PTR +
+ 4 * bufnum));
+ }
+#endif
+ dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n",
+ __func__, vb, vb->baddr, vb->bsize);
+
+ list_del(&vb->queue);
+ vb->state = state;
+ do_gettimeofday(&vb->ts);
+ vb->field_count++;
+
+ wake_up(&vb->done);
+ }
+ }
+
+ if (list_empty(&pcdev->capture)) {
+ writel(pcdev->discard_buffer_dma, pcdev->base_emma +
+ PRP_DEST_RGB1_PTR + 4 * bufnum);
+ return;
+ }
+
+ buf = list_entry(pcdev->capture.next,
+ struct mx27_buffer, vb.queue);
+
+ buf->bufnum = bufnum;
+
+ list_move_tail(pcdev->capture.next, &pcdev->active_bufs);
+
+ vb = &buf->vb;
+ vb->state = VIDEOBUF_ACTIVE;
+
+ phys = videobuf_to_dma_contig(vb);
+ writel(phys, pcdev->base_emma + PRP_DEST_RGB1_PTR + 4 * bufnum);
+}
+
+static irqreturn_t mx27_camera_emma_irq(int irq_emma, void *data)
+{
+ struct mx27_camera_dev *pcdev = data;
+ unsigned int status = readl(pcdev->base_emma + PRP_INTRSTATUS);
+
+ if (status & (1 << 6))
+ mx27_camera_frame_done_emma(pcdev, 0, VIDEOBUF_DONE);
+ if (status & (1 << 5))
+ mx27_camera_frame_done_emma(pcdev, 1, VIDEOBUF_DONE);
+ if (status & (1 << 7)) {
+ uint32_t cntl;
+ cntl = readl(pcdev->base_emma + PRP_CNTL);
+ writel(cntl & ~PRP_CNTL_CH1EN, pcdev->base_emma + PRP_CNTL);
+ writel(cntl, pcdev->base_emma + PRP_CNTL);
+ }
+
+ writel(status, pcdev->base_emma + PRP_INTRSTATUS);
+
+ return IRQ_HANDLED;
+}
+
+/* Should be allocated dynamically too, but we have only one. */
+static struct soc_camera_host mx27_soc_camera_host = {
+ .drv_name = MX27_CAM_DRV_NAME,
+ .ops = &mx27_soc_camera_host_ops,
+};
+
+int mx27_camera_emma_init(struct mx27_camera_dev *pcdev)
+{
+ struct resource *res_emma = pcdev->res_emma;
+ int err = 0;
+
+ if (!request_mem_region(res_emma->start, resource_size(res_emma),
+ MX27_CAM_DRV_NAME)) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ pcdev->base_emma = ioremap(res_emma->start, resource_size(res_emma));
+ if (!pcdev->base_emma) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+
+ err = request_irq(pcdev->irq_emma, mx27_camera_emma_irq, 0,
+ MX27_CAM_DRV_NAME, pcdev);
+ if (err) {
+ dev_err(pcdev->dev, "Camera EMMA interrupt register failed \n");
+ goto exit_iounmap;
+ }
+
+ pcdev->clk_emma = clk_get(NULL, "emma");
+ if (IS_ERR(pcdev->clk_emma)) {
+ err = PTR_ERR(pcdev->clk_emma);
+ goto exit_free_irq;
+ }
+
+ clk_enable(pcdev->clk_emma);
+
+ err = mx27_camera_emma_prp_reset(pcdev);
+ if (err)
+ goto exit_clk_emma_put;
+
+ return err;
+
+exit_clk_emma_put:
+ clk_disable(pcdev->clk_emma);
+ clk_put(pcdev->clk_emma);
+exit_free_irq:
+ free_irq(pcdev->irq_emma, pcdev);
+exit_iounmap:
+ iounmap(pcdev->base_emma);
+exit_release:
+ release_mem_region(res_emma->start, resource_size(res_emma));
+out:
+ return err;
+}
+
+#define DMA_REQ_CSI_RX 31 /* FIXME: Add this to a resource */
+
+static int mx27_camera_probe(struct platform_device *pdev)
+{
+ struct mx27_camera_dev *pcdev;
+ struct resource *res_csi, *res_emma;
+ void __iomem *base_csi;
+ unsigned int irq_csi, irq_emma;
+ int err = 0;
+
+ dev_info(&pdev->dev, "initialising\n");
+
+ res_csi = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq_csi = platform_get_irq(pdev, 0);
+ if (!res_csi || !irq_csi) {
+ dev_err(&pdev->dev, "No platform irq\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
+ if (!pcdev) {
+ dev_err(&pdev->dev, "Could not allocate pcdev\n");
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ pcdev->clk_csi = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pcdev->clk_csi)) {
+ err = PTR_ERR(pcdev->clk_csi);
+ goto exit_kfree;
+ }
+
+ dev_info(&pdev->dev, "Camera clock frequency: %ld\n",
+ clk_get_rate(pcdev->clk_csi));
+
+ /* Initialize DMA */
+ pcdev->dma = imx_dma_request_by_prio("CSI RX DMA", DMA_PRIO_HIGH);
+ if (pcdev->dma < 0) {
+ dev_err(&pdev->dev,
+ "mxc_v4l_read failed to request DMA channel\n");
+ err = -EIO;
+ goto exit_clk_put;
+ }
+
+ err = imx_dma_setup_handlers(pcdev->dma, mx27_camera_dma_callback,
+ mx27_camera_dma_err_callback, pcdev);
+ if (err != 0) {
+ dev_err(&pdev->dev,
+ "mxc_v4l_read failed to set DMA callback\n");
+ err = -EIO;
+ goto exit_dma_free;
+ }
+
+ imx_dma_config_channel(pcdev->dma,
+ IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_FIFO,
+ IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+ DMA_REQ_CSI_RX, 1);
+
+ imx_dma_config_burstlen(pcdev->dma, 64);
+
+ dev_set_drvdata(&pdev->dev, pcdev);
+ pcdev->res_csi = res_csi;
+
+ pcdev->pdata = pdev->dev.platform_data;
+ pcdev->platform_flags = pcdev->pdata->flags;
+
+ /* FIXME: clk_round_rate first! */
+ clk_set_rate(pcdev->clk_csi, pcdev->pdata->clk * 2);
+
+ INIT_LIST_HEAD(&pcdev->capture);
+ INIT_LIST_HEAD(&pcdev->active_bufs);
+ spin_lock_init(&pcdev->lock);
+
+ /*
+ * Request the regions.
+ */
+ if (!request_mem_region(res_csi->start, resource_size(res_csi),
+ MX27_CAM_DRV_NAME)) {
+ err = -EBUSY;
+ goto exit_dma_free;
+ }
+
+ base_csi = ioremap(res_csi->start, resource_size(res_csi));
+ if (!base_csi) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+ pcdev->irq_csi = irq_csi;
+ pcdev->base_csi = base_csi;
+ pcdev->dev = &pdev->dev;
+
+ pcdev->pdata->init(pdev);
+
+ err = request_irq(pcdev->irq_csi, mx27_camera_irq, 0, MX27_CAM_DRV_NAME,
+ pcdev);
+ if (err) {
+ dev_err(pcdev->dev, "Camera interrupt register failed \n");
+ goto exit_iounmap;
+ }
+
+ mx27_soc_camera_host.priv = pcdev;
+ mx27_soc_camera_host.v4l2_dev.dev = &pdev->dev;
+ mx27_soc_camera_host.nr = pdev->id;
+
+ /* EMMA support */
+ res_emma = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ irq_emma = platform_get_irq(pdev, 1);
+
+ if (res_emma && irq_emma) {
+ dev_info(&pdev->dev, "Using EMMA\n");
+ pcdev->use_emma = 1;
+ pcdev->res_emma = res_emma;
+ pcdev->irq_emma = irq_emma;
+ if (mx27_camera_emma_init(pcdev))
+ goto exit_free_irq;
+ }
+
+ err = soc_camera_host_register(&mx27_soc_camera_host);
+ if (err)
+ goto exit_free_emma;
+
+ return 0;
+
+exit_free_emma:
+ free_irq(pcdev->irq_emma, pcdev);
+ clk_disable(pcdev->clk_emma);
+ clk_put(pcdev->clk_emma);
+ iounmap(pcdev->base_emma);
+ release_mem_region(res_emma->start, resource_size(res_emma));
+exit_free_irq:
+ free_irq(pcdev->irq_csi, pcdev);
+exit_iounmap:
+ iounmap(base_csi);
+exit_release:
+ release_mem_region(res_csi->start, resource_size(res_csi));
+exit_dma_free:
+ imx_dma_free(pcdev->dma);
+exit_clk_put:
+ clk_put(pcdev->clk_csi);
+exit_kfree:
+ kfree(pcdev);
+exit:
+ return err;
+}
+
+static int __devexit mx27_camera_remove(struct platform_device *pdev)
+{
+ struct mx27_camera_dev *pcdev = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ clk_put(pcdev->clk_csi);
+ imx_dma_free(pcdev->dma);
+ free_irq(pcdev->irq_csi, pcdev);
+ if (mx27_camera_emma(pcdev))
+ free_irq(pcdev->irq_emma, pcdev);
+
+ soc_camera_host_unregister(&mx27_soc_camera_host);
+
+ iounmap(pcdev->base_csi);
+
+ if (mx27_camera_emma(pcdev)) {
+ clk_disable(pcdev->clk_emma);
+ clk_put(pcdev->clk_emma);
+ iounmap(pcdev->base_emma);
+ res = pcdev->res_emma;
+ release_mem_region(res->start, resource_size(res));
+ }
+
+ pcdev->pdata->exit(pdev);
+
+ res = pcdev->res_csi;
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(pcdev);
+
+ dev_info(&pdev->dev, "MX27 Camera driver unloaded\n");
+
+ return 0;
+}
+
+static struct platform_driver mx27_camera_driver = {
+ .driver = {
+ .name = MX27_CAM_DRV_NAME,
+ },
+ .probe = mx27_camera_probe,
+ .remove = __exit_p(mx27_camera_remove),
+};
+
+
+static int __devinit mx27_camera_init(void)
+{
+ return platform_driver_register(&mx27_camera_driver);
+}
+
+static void __exit mx27_camera_exit(void)
+{
+ return platform_driver_unregister(&mx27_camera_driver);
+}
+
+module_init(mx27_camera_init);
+module_exit(mx27_camera_exit);
+
+MODULE_DESCRIPTION("i.MX27 SoC Camera Host driver");
+MODULE_AUTHOR("Sascha Hauer <sha@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
