Re: [PATCH v3 1/4] venus: firmware: add routine to reset ARM9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 07/04/2018 10:06 PM, Vikash Garodia wrote:
> Add routine to reset the ARM9 and brings it out of reset. Also
> abstract the Venus CPU state handling with a new function. This
> is in preparation to add PIL functionality in venus driver.
> 
> Signed-off-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
> ---
>  drivers/media/platform/qcom/venus/core.h         |  1 +
>  drivers/media/platform/qcom/venus/firmware.c     | 36 ++++++++++++++++++++++++
>  drivers/media/platform/qcom/venus/firmware.h     |  1 +
>  drivers/media/platform/qcom/venus/hfi_venus.c    | 13 +++------
>  drivers/media/platform/qcom/venus/hfi_venus_io.h |  5 ++++
>  5 files changed, 47 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 2f02365..eb5ee66 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -129,6 +129,7 @@ struct venus_core {
>  	struct device *dev;
>  	struct device *dev_dec;
>  	struct device *dev_enc;
> +	bool no_tz;
>  	struct mutex lock;
>  	struct list_head instances;
>  	atomic_t insts_count;
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 521d4b3..3968553d 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -22,11 +22,47 @@
>  #include <linux/sizes.h>
>  #include <linux/soc/qcom/mdt_loader.h>
>  
> +#include "core.h"
>  #include "firmware.h"
> +#include "hfi_venus_io.h"
>  
>  #define VENUS_PAS_ID			9
>  #define VENUS_FW_MEM_SIZE		(6 * SZ_1M)
>  
> +static void venus_reset_cpu(struct venus_core *core)
> +{
> +	void __iomem *base = core->base;
> +
> +	writel(0, base + WRAPPER_FW_START_ADDR);
> +	writel(VENUS_FW_MEM_SIZE, base + WRAPPER_FW_END_ADDR);
> +	writel(0, base + WRAPPER_CPA_START_ADDR);
> +	writel(VENUS_FW_MEM_SIZE, base + WRAPPER_CPA_END_ADDR);
> +	writel(0x0, base + WRAPPER_CPU_CGC_DIS);
> +	writel(0x0, base + WRAPPER_CPU_CLOCK_CONFIG);
> +
> +	/* Make sure all register writes are committed. */
> +	mb();
> +
> +	/* Bring ARM9 out of reset */
> +	writel_relaxed(0, base + WRAPPER_A9SS_SW_RESET);
> +}
> +
> +int venus_set_hw_state(struct venus_core *core, bool resume)
> +{
> +	void __iomem *base = core->base;
> +
> +	if (!core->no_tz)
> +		return qcom_scm_set_remote_state(resume, 0);
> +
> +	if (resume)
> +		venus_reset_cpu(core);
> +	else
> +		writel(1, base + WRAPPER_A9SS_SW_RESET);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(venus_set_hw_state);

This export_symbol shouldn't be needed

-- 
regards,
Stan



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux