Hi Guennadi,
Thank you for the patch.
On Tuesday, 8 May 2018 18:07:44 EEST Guennadi Liakhovetski wrote:
> When a command ends up in a STALL on the control pipe, use the Request
> Error Code control to provide a more precise error information to the
> user. For example, if a camera is still busy processing a control,
> when the same or an interrelated control set request arrives, the
> camera can react with a STALL and then return the "Not ready" status
> in response to a UVC_VC_REQUEST_ERROR_CODE_CONTROL command. With this
> patch the user would then get an EBUSY error code instead of a
> generic EPIPE.
>
> Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
>
> v8:
>
> * restrict UVC_VC_REQUEST_ERROR_CODE_CONTROL to the control interface
> * fix the wIndex value
> * improve error codes
> * cosmetic changes
>
> drivers/media/usb/uvc/uvc_video.c | 52 +++++++++++++++++++++++++++++++-----
> 1 file changed, 46 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_video.c
> b/drivers/media/usb/uvc/uvc_video.c index aa0082f..ce65cd6 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -73,17 +73,57 @@ int uvc_query_ctrl(struct uvc_device *dev, u8 query, u8
> unit, u8 intfnum, u8 cs, void *data, u16 size)
> {
> int ret;
> + u8 error;
> + u8 tmp;
>
> ret = __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size,
> UVC_CTRL_CONTROL_TIMEOUT);
> - if (ret != size) {
> - uvc_printk(KERN_ERR, "Failed to query (%s) UVC control %u on "
> - "unit %u: %d (exp. %u).\n", uvc_query_name(query), cs,
> - unit, ret, size);
> - return -EIO;
> + if (likely(ret == size))
> + return 0;
> +
> + uvc_printk(KERN_ERR,
> + "Failed to query (%s) UVC control %u on unit %u: %d (exp. %u).\n",
> + uvc_query_name(query), cs, unit, ret, size);
> +
> + if (ret != -EPIPE)
> + return ret;
> +
> + tmp = *(u8 *)data;
> +
> + ret = __uvc_query_ctrl(dev, UVC_GET_CUR, 0, intfnum,
> + UVC_VC_REQUEST_ERROR_CODE_CONTROL, data, 1,
> + UVC_CTRL_CONTROL_TIMEOUT);
> +
> + error = *(u8 *)data;
> + *(u8 *)data = tmp;
> +
> + if (ret != 1)
> + return ret < 0 ? ret : -EPIPE;
> +
> + uvc_trace(UVC_TRACE_CONTROL, "Control error %u\n", error);
> +
> + switch (error) {
> + case 0:
> + /* Cannot happen - we received a STALL */
> + return -EPIPE;
> + case 1: /* Not ready */
> + return -EBUSY;
> + case 2: /* Wrong state */
> + return -EILSEQ;
> + case 3: /* Power */
> + return -EREMOTE;
> + case 4: /* Out of range */
> + return -ERANGE;
> + case 5: /* Invalid unit */
> + case 6: /* Invalid control */
> + case 7: /* Invalid Request */
> + case 8: /* Invalid value within range */
> + return -EINVAL;
> + default: /* reserved or unknown */
> + break;
> }
>
> - return 0;
> + return -EPIPE;
> }
>
> static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
--
Regards,
Laurent Pinchart
