Hi Jacopo,
Pardon the late reply, see below.
On 07/11/2018 12:21 AM, jacopo mondi wrote:
Hi Steve,
On Tue, Jul 10, 2018 at 02:10:54PM -0700, Steve Longerbeam wrote:
Hi Jacopo,
Sorry to report my testing on SabreSD has same result
as last time. This series fixes the LP-11 timeout at stream
on but captured images are still blank. I tried the 640x480
mode with UYVY2X8. Here is the pad config:
This saddens me :(
I'm capturing with the same format and sizes... this shouldn't be the
issue
Could you confirm this matches what you have in your tree?
5dc2c80 media: ov5640: Fix timings setup code
b35e757 media: i2c: ov5640: Re-work MIPI startup sequence
3c4a737 media: ov5640: fix frame interval enumeration
41cb1c7 media: ov5640: adjust xclk_max
c3f3ba3 media: ov5640: add support of module orientation
ce85705 media: ov5640: add HFLIP/VFLIP controls support
8663341 media: ov5640: Program the visible resolution
476dec0 media: ov5640: Add horizontal and vertical totals
dba13a0 media: ov5640: Change horizontal and vertical resolutions name
8f57c2f media: ov5640: Init properly the SCLK dividers
Yes, I have that commit sequence.
FWIW, I can verify what Jagan Teki reported earlier, that the driver still
works on the SabreSD platform at:
dba13a0 media: ov5640: Change horizontal and vertical resolutions name
and is broken at:
476dec0 media: ov5640: Add horizontal and vertical totals
with LP-11 timeout at the mipi csi-2 receiver:
[ 80.763189] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000230
[ 80.769599] ipu1_csi1: pipeline start failed with -110
Steve
# media-ctl --get-v4l2 "'ov5640 1-003c':0"
[fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb
ycbcr:601 quantization:full-range]
Steve
On 07/10/2018 11:36 AM, Jacopo Mondi wrote:
Hello,
this series fixes capture operations on i.MX6Q platforms (and possible other
platforms reported not working) using MIPI CSI-2 interface.
This iteration expands the v1 version with an additional fix, initially
submitted by Maxime in his series:
[PATCH v3 00/12] media: ov5640: Misc cleanup and improvements
https://www.spinics.net/lists/linux-media/msg134436.html
The original patch has been reported not fully fixing the issues by Daniel Mack
in his comment here below (on a Qualcomm platform if I'm not wrong):
https://www.spinics.net/lists/linux-media/msg134524.html
On my i.MX6Q testing platform that patch alone does not fix MIPI capture
neither.
The version I'm sending here re-introduces some of the timings parameters in the
initial configuration blob (not in the single mode ones), which apparently has
to be at least initially programmed to allow the driver to later program them
singularly in the 'set_timings()' function. Unfortunately I do not have a real
rationale behind this which explains why it has to be done this way :(
For the MIPI startup sequence re-work patch, no changes compared to v1.
Steve reported he has verified the LP-11 timout issue is solved on his testing
platform too. For more details, please refer to the v1 cover letter:
https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg133352.html
Thanks
j
Jacopo Mondi (1):
media: i2c: ov5640: Re-work MIPI startup sequence
Samuel Bobrowicz (1):
media: ov5640: Fix timings setup code
drivers/media/i2c/ov5640.c | 107 ++++++++++++++++++++++++++++++++++-----------
1 file changed, 82 insertions(+), 25 deletions(-)
--
2.7.4
