Hi Jacopo, On 2018-07-09 16:19:16 +0200, Jacopo Mondi wrote: > Align description of the Gen2 and Gen3 bindings for parallel input. > This commit prepares for description of optional endpoint properties in ports > subnodes accepting parallel video connections. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/media/rcar_vin.txt | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt > index e25ab07..39c4e6a 100644 > --- a/Documentation/devicetree/bindings/media/rcar_vin.txt > +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt > @@ -39,9 +39,11 @@ Additionally, an alias named vinX will need to be created to specify > which video input device this is. > > The per-board settings Gen2 platforms: > - - port sub-node describing a single endpoint connected to the vin > - as described in video-interfaces.txt[1]. Only the first one will > - be considered as each vin interface has one input port. > + > +- port - sub-node describing a single endpoint connected to the VIN > + from external SoC pins as described in video-interfaces.txt[1]. > + Only the first one will be considered as each vin interface has one > + input port. > > The per-board settings Gen3 platforms: > > @@ -52,7 +54,7 @@ from local SoC CSI-2 receivers (port@1) depending on SoC. > - renesas,id - ID number of the VIN, VINx in the documentation. > - ports > - port@0 - sub-node describing a single endpoint connected to the VIN > - from external SoC pins described in video-interfaces.txt[1]. > + from external SoC pins as described in video-interfaces.txt[1]. > Describing more than one endpoint in port@0 is invalid. Only VIN > instances that are connected to external pins should have port@0. > - port@1 - sub-nodes describing one or more endpoints connected to > -- > 2.7.4 > -- Regards, Niklas Söderlund
