From: "Chen, Ping-chung" <ping-chung.chen@xxxxxxxxx>
Add a V4L2 sub-device driver for the Sony IMX208 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Signed-off-by: Ping-Chung Chen <ping-chung.chen@xxxxxxxxx>
---
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx208.c | 953 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 965 insertions(+)
create mode 100644 drivers/media/i2c/imx208.c
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 8669853..1c739f4 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+config VIDEO_IMX208
+ tristate "Sony IMX208 sensor support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Sony
+ IMX208 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx208.
+
config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 837c428..47604c2 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -104,6 +104,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_IMX208) += imx208.o
obj-$(CONFIG_VIDEO_IMX258) += imx258.o
obj-$(CONFIG_VIDEO_IMX274) += imx274.o
diff --git a/drivers/media/i2c/imx208.c b/drivers/media/i2c/imx208.c
new file mode 100644
index 0000000..9af9043
--- /dev/null
+++ b/drivers/media/i2c/imx208.c
@@ -0,0 +1,953 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Intel Corporation
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <asm/unaligned.h>
+
+#ifndef V4L2_CID_DIGITAL_GAIN
+#define V4L2_CID_DIGITAL_GAIN V4L2_CID_GAIN
+#endif
+
+#define IMX208_REG_VALUE_08BIT 1
+#define IMX208_REG_VALUE_16BIT 2
+#define IMX208_REG_VALUE_24BIT 3
+
+#define IMX208_REG_MODE_SELECT 0x0100
+#define IMX208_MODE_STANDBY 0x00
+#define IMX208_MODE_STREAMING 0x01
+
+/* Chip ID */
+#define IMX208_REG_CHIP_ID 0x0000
+#define IMX208_CHIP_ID 0x0208
+
+/* V_TIMING internal */
+#define IMX208_REG_VTS 0x0340
+#define IMX208_VTS_60FPS 0x0472
+#define IMX208_VTS_BINNING 0x0239
+#define IMX208_VTS_60FPS_MIN 0x0458
+#define IMX208_VTS_BINNING_MIN 0x0230
+#define IMX208_VTS_MAX 0xffff
+
+/* HBLANK control - read only */
+#define IMX208_PPL_384MHZ 1124
+#define IMX208_PPL_96MHZ 1124
+
+/* Exposure control */
+#define IMX208_REG_EXPOSURE 0x0202
+#define IMX208_EXPOSURE_MIN 4
+#define IMX208_EXPOSURE_STEP 1
+#define IMX208_EXPOSURE_DEFAULT 0x190
+#define IMX208_EXPOSURE_MAX 65535
+
+/* Analog gain control */
+#define IMX208_REG_ANALOG_GAIN 0x0204
+#define IMX208_ANA_GAIN_MIN 0
+#define IMX208_ANA_GAIN_MAX 0x00e0
+#define IMX208_ANA_GAIN_STEP 1
+#define IMX208_ANA_GAIN_DEFAULT 0x0
+
+/* Digital gain control */
+#define IMX208_REG_GR_DIGITAL_GAIN 0x020e
+#define IMX208_REG_R_DIGITAL_GAIN 0x0210
+#define IMX208_REG_B_DIGITAL_GAIN 0x0212
+#define IMX208_REG_GB_DIGITAL_GAIN 0x0214
+#define IMX208_DGTL_GAIN_MIN 0
+#define IMX208_DGTL_GAIN_MAX 4096 /* Max = 0xFFF */
+#define IMX208_DGTL_GAIN_DEFAULT 0x100
+#define IMX208_DGTL_GAIN_STEP 1
+
+/* Orientation */
+#define REG_MIRROR_FLIP_CONTROL 0x0101
+#define REG_CONFIG_MIRROR_FLIP 0x03
+
+#define IMX208_REG_TEST_PATTERN_MODE 0x0600
+
+struct imx208_reg {
+ u16 address;
+ u8 val;
+};
+
+struct imx208_reg_list {
+ u32 num_of_regs;
+ const struct imx208_reg *regs;
+};
+
+/* Link frequency config */
+struct imx208_link_freq_config {
+ u32 pixels_per_line;
+
+ /* PLL registers for this link frequency */
+ struct imx208_reg_list reg_list;
+};
+
+/* Mode : resolution and related config&values */
+struct imx208_mode {
+ /* Frame width */
+ u32 width;
+ /* Frame height */
+ u32 height;
+
+ /* V-timing */
+ u32 vts_def;
+ u32 vts_min;
+
+ /* Index of Link frequency config to be used */
+ u32 link_freq_index;
+ /* Default register values */
+ struct imx208_reg_list reg_list;
+};
+
+static const struct imx208_reg mipi_data_rate[] = {
+ {0x0305, 0x02},
+ {0x0307, 0x50},
+ {0x303C, 0x3C},
+};
+
+static const struct imx208_reg mode_1936x1096_60fps_regs[] = {
+ {0x0340, 0x04},
+ {0x0341, 0x72},
+ {0x0342, 0x04},
+ {0x0343, 0x64},
+ {0x034C, 0x07},
+ {0x034D, 0x90},
+ {0x034E, 0x04},
+ {0x034F, 0x48},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x3048, 0x00},
+ {0x3050, 0x01},
+ {0x30D5, 0x00},
+ {0x3301, 0x00},
+ {0x3318, 0x62},
+ {0x0202, 0x01},
+ {0x0203, 0x90},
+ {0x0205, 0x00},
+};
+
+static const struct imx208_reg mode_968_548_60fps_regs[] = {
+ {0x0340, 0x02},
+ {0x0341, 0x39},
+ {0x0342, 0x08},
+ {0x0343, 0xC8},
+ {0x034C, 0x03},
+ {0x034D, 0xC8},
+ {0x034E, 0x02},
+ {0x034F, 0x24},
+ {0x0381, 0x01},
+ {0x0383, 0x03},
+ {0x0385, 0x01},
+ {0x0387, 0x03},
+ {0x3048, 0x01},
+ {0x3050, 0x02},
+ {0x30D5, 0x03},
+ {0x3301, 0x10},
+ {0x3318, 0x75},
+ {0x0202, 0x01},
+ {0x0203, 0x90},
+ {0x0205, 0x00},
+};
+
+static const char * const imx208_test_pattern_menu[] = {
+ "Disabled",
+ "Solid Color",
+ "100% Color Bar",
+ "Fade to grey Color Bar",
+ "PN9",
+ "Fixed Pattern1",
+ "Fixed Pattern2",
+ "Fixed Pattern3",
+ "Fixed Pattern4",
+ "Fixed Pattern5",
+ "Fixed Pattern6"
+};
+
+/* Configurations for supported link frequencies */
+#define IMX208_LINK_FREQ_384MHZ 384000000ULL
+#define IMX208_LINK_FREQ_192MHZ 192000000ULL
+#define IMX208_LINK_FREQ_96MHZ 96000000ULL
+#define IMX208_LINK_FREQ_48MHZ 48000000ULL
+
+enum {
+ IMX208_LINK_FREQ_384MHZ_INDEX,
+ IMX208_LINK_FREQ_96MHZ_INDEX,
+};
+
+/*
+ * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
+ * data rate => double data rate; number of lanes => 2; bits per pixel => 10
+ */
+static u64 link_freq_to_pixel_rate(u64 f)
+{
+ f *= 2 * 2;
+ do_div(f, 10);
+
+ return f;
+}
+
+/* Menu items for LINK_FREQ V4L2 control */
+static const s64 link_freq_menu_items[] = {
+ IMX208_LINK_FREQ_384MHZ,
+ IMX208_LINK_FREQ_96MHZ,
+};
+
+/* Link frequency configs */
+static const struct imx208_link_freq_config link_freq_configs[] = {
+ {
+ .pixels_per_line = IMX208_PPL_384MHZ,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mipi_data_rate),
+ .regs = mipi_data_rate,
+ }
+ },
+ {
+ .pixels_per_line = IMX208_PPL_96MHZ,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mipi_data_rate),
+ .regs = mipi_data_rate,
+ }
+ },
+};
+
+/* Mode configs */
+static const struct imx208_mode supported_modes[] = {
+ {
+ .width = 1936,
+ .height = 1096,
+ .vts_def = IMX208_VTS_60FPS,
+ .vts_min = IMX208_VTS_60FPS_MIN,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_1936x1096_60fps_regs),
+ .regs = mode_1936x1096_60fps_regs,
+ },
+ .link_freq_index = 0,
+ },
+ {
+ .width = 968,
+ .height = 548,
+ .vts_def = IMX208_VTS_BINNING,
+ .vts_min = IMX208_VTS_BINNING_MIN,
+ .reg_list = {
+ .num_of_regs = ARRAY_SIZE(mode_968_548_60fps_regs),
+ .regs = mode_968_548_60fps_regs,
+ },
+ .link_freq_index = IMX208_LINK_FREQ_96MHZ_INDEX,
+ },
+};
+
+struct imx208 {
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+
+ struct v4l2_ctrl_handler ctrl_handler;
+ /* V4L2 Controls */
+ struct v4l2_ctrl *link_freq;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *vblank;
+ struct v4l2_ctrl *hblank;
+ struct v4l2_ctrl *exposure;
+
+ /* Current mode */
+ const struct imx208_mode *cur_mode;
+
+ /* Mutex for serialized access */
+ struct mutex mutex;
+
+ /* Streaming on/off */
+ bool streaming;
+};
+
+static inline struct imx208 *to_imx208(struct v4l2_subdev *_sd)
+{
+ return container_of(_sd, struct imx208, sd);
+}
+
+/* Read registers up to 2 at a time */
+static int imx208_read_reg(struct imx208 *imx208, u16 reg, u32 len, u32 *val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ struct i2c_msg msgs[2];
+ u8 addr_buf[2] = { reg >> 8, reg & 0xff };
+ u8 data_buf[4] = { 0, };
+ int ret;
+
+ if (len > 4)
+ return -EINVAL;
+
+ /* Write register address */
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = ARRAY_SIZE(addr_buf);
+ msgs[0].buf = addr_buf;
+
+ /* Read data from register */
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = len;
+ msgs[1].buf = &data_buf[4 - len];
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ *val = get_unaligned_be32(data_buf);
+
+ return 0;
+}
+
+/* Write registers up to 4 at a time */
+static int imx208_write_reg(struct imx208 *imx208, u16 reg, u32 len, u32 val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ u8 buf[6];
+
+ if (len > 4)
+ return -EINVAL;
+
+ put_unaligned_be16(reg, buf);
+ put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
+ if (i2c_master_send(client, buf, len + 2) != len + 2)
+ return -EIO;
+
+ return 0;
+}
+
+/* Write a list of registers */
+static int imx208_write_regs(struct imx208 *imx208,
+ const struct imx208_reg *regs, u32 len)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < len; i++) {
+ ret = imx208_write_reg(imx208, regs[i].address, 1,
+ regs[i].val);
+ if (ret) {
+ dev_err_ratelimited(
+ &client->dev,
+ "Failed to write reg 0x%4.4x. error = %d\n",
+ regs[i].address, ret);
+
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/* Open sub-device */
+static int imx208_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *try_fmt =
+ v4l2_subdev_get_try_format(sd, fh->pad, 0);
+
+ /* Initialize try_fmt */
+ try_fmt->width = supported_modes[0].width;
+ try_fmt->height = supported_modes[0].height;
+ try_fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10;
+ try_fmt->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+
+static int imx208_update_digital_gain(struct imx208 *imx208, u32 len, u32 val)
+{
+ int ret;
+
+ ret = imx208_write_reg(imx208, IMX208_REG_GR_DIGITAL_GAIN,
+ IMX208_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ ret = imx208_write_reg(imx208, IMX208_REG_GB_DIGITAL_GAIN,
+ IMX208_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ ret = imx208_write_reg(imx208, IMX208_REG_R_DIGITAL_GAIN,
+ IMX208_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ ret = imx208_write_reg(imx208, IMX208_REG_B_DIGITAL_GAIN,
+ IMX208_REG_VALUE_16BIT,
+ val);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+static int imx208_enable_test_pattern(struct imx208 *imx208, u32 pattern)
+{
+ u32 val;
+
+ val = (pattern <= 4) ? pattern : pattern + 0xFB;
+
+ return imx208_write_reg(imx208, IMX208_REG_TEST_PATTERN_MODE,
+ IMX208_REG_VALUE_16BIT, val);
+}
+
+static int imx208_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct imx208 *imx208 =
+ container_of(ctrl->handler, struct imx208, ctrl_handler);
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ int ret = 0;
+ /*
+ * Applying V4L2 control value only happens
+ * when power is up for streaming
+ */
+ if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_ANALOGUE_GAIN:
+ ret = imx208_write_reg(imx208, IMX208_REG_ANALOG_GAIN,
+ IMX208_REG_VALUE_16BIT,
+ ctrl->val);
+ break;
+ case V4L2_CID_EXPOSURE:
+ ret = imx208_write_reg(imx208, IMX208_REG_EXPOSURE,
+ IMX208_REG_VALUE_16BIT,
+ ctrl->val);
+ break;
+ case V4L2_CID_DIGITAL_GAIN:
+ ret = imx208_update_digital_gain(imx208, IMX208_REG_VALUE_16BIT,
+ ctrl->val);
+ break;
+ case V4L2_CID_VBLANK:
+ /* Update VTS that meets expected vertical blanking */
+ ret = imx208_write_reg(imx208, IMX208_REG_VTS,
+ IMX208_REG_VALUE_16BIT,
+ imx208->cur_mode->height + ctrl->val);
+ break;
+ case V4L2_CID_TEST_PATTERN:
+ ret = imx208_enable_test_pattern(imx208, ctrl->val);
+ break;
+ default:
+ dev_info(&client->dev,
+ "ctrl(id:0x%x,val:0x%x) is not handled\n",
+ ctrl->id, ctrl->val);
+ break;
+ }
+
+ pm_runtime_put(&client->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops imx208_ctrl_ops = {
+ .s_ctrl = imx208_set_ctrl,
+};
+
+static int imx208_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ /* Only one bayer order(GRBG) is supported */
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_SRGGB10_1X10;
+
+ return 0;
+}
+
+static int imx208_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->index >= ARRAY_SIZE(supported_modes))
+ return -EINVAL;
+
+ if (fse->code != MEDIA_BUS_FMT_SRGGB10_1X10)
+ return -EINVAL;
+
+ fse->min_width = supported_modes[fse->index].width;
+ fse->max_width = fse->min_width;
+ fse->min_height = supported_modes[fse->index].height;
+ fse->max_height = fse->min_height;
+
+ return 0;
+}
+
+static void imx208_update_pad_format(const struct imx208_mode *mode,
+ struct v4l2_subdev_format *fmt)
+{
+ fmt->format.width = mode->width;
+ fmt->format.height = mode->height;
+ fmt->format.code = MEDIA_BUS_FMT_SRGGB10_1X10;
+ fmt->format.field = V4L2_FIELD_NONE;
+}
+
+static int __imx208_get_pad_format(struct imx208 *imx208,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+ fmt->format = *v4l2_subdev_get_try_format(&imx208->sd, cfg,
+ fmt->pad);
+ else
+ imx208_update_pad_format(imx208->cur_mode, fmt);
+
+ return 0;
+}
+
+static int imx208_get_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct imx208 *imx208 = to_imx208(sd);
+ int ret;
+
+ mutex_lock(&imx208->mutex);
+ ret = __imx208_get_pad_format(imx208, cfg, fmt);
+ mutex_unlock(&imx208->mutex);
+
+ return ret;
+}
+
+static int imx208_set_pad_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *fmt)
+{
+ struct imx208 *imx208 = to_imx208(sd);
+ const struct imx208_mode *mode;
+ struct v4l2_mbus_framefmt *framefmt;
+ s32 vblank_def;
+ s32 vblank_min;
+ s64 h_blank;
+ s64 pixel_rate;
+ s64 link_freq;
+
+ mutex_lock(&imx208->mutex);
+
+ fmt->format.code = MEDIA_BUS_FMT_SRGGB10_1X10;
+
+ mode = v4l2_find_nearest_size(
+ supported_modes, ARRAY_SIZE(supported_modes), width, height,
+ fmt->format.width, fmt->format.height);
+ imx208_update_pad_format(mode, fmt);
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ framefmt = v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
+ *framefmt = fmt->format;
+ } else {
+ imx208->cur_mode = mode;
+ __v4l2_ctrl_s_ctrl(imx208->link_freq, mode->link_freq_index);
+
+ link_freq = link_freq_menu_items[mode->link_freq_index];
+ pixel_rate = link_freq_to_pixel_rate(link_freq);
+ __v4l2_ctrl_s_ctrl_int64(imx208->pixel_rate, pixel_rate);
+ /* Update limits and set FPS to default */
+ vblank_def = imx208->cur_mode->vts_def -
+ imx208->cur_mode->height;
+ vblank_min = imx208->cur_mode->vts_min -
+ imx208->cur_mode->height;
+ __v4l2_ctrl_modify_range(
+ imx208->vblank, vblank_min,
+ IMX208_VTS_MAX - imx208->cur_mode->height, 1,
+ vblank_def);
+ __v4l2_ctrl_s_ctrl(imx208->vblank, vblank_def);
+ h_blank =
+ link_freq_configs[mode->link_freq_index].pixels_per_line
+ - imx208->cur_mode->width;
+ __v4l2_ctrl_modify_range(imx208->hblank, h_blank,
+ h_blank, 1, h_blank);
+ }
+
+ mutex_unlock(&imx208->mutex);
+
+ return 0;
+}
+
+/* Start streaming */
+static int imx208_start_streaming(struct imx208 *imx208)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ const struct imx208_reg_list *reg_list;
+ int ret, link_freq_index;
+
+ /* Setup PLL */
+ link_freq_index = imx208->cur_mode->link_freq_index;
+ reg_list = &link_freq_configs[link_freq_index].reg_list;
+ ret = imx208_write_regs(imx208, reg_list->regs, reg_list->num_of_regs);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set plls\n", __func__);
+ return ret;
+ }
+
+ /* Apply default values of current mode */
+ reg_list = &imx208->cur_mode->reg_list;
+ ret = imx208_write_regs(imx208, reg_list->regs, reg_list->num_of_regs);
+ if (ret) {
+ dev_err(&client->dev, "%s failed to set mode\n", __func__);
+ return ret;
+ }
+
+ /* Apply customized values from user */
+ ret = __v4l2_ctrl_handler_setup(imx208->sd.ctrl_handler);
+ if (ret)
+ return ret;
+
+ /* set stream on register */
+ return imx208_write_reg(imx208, IMX208_REG_MODE_SELECT,
+ IMX208_REG_VALUE_08BIT,
+ IMX208_MODE_STREAMING);
+}
+
+/* Stop streaming */
+static int imx208_stop_streaming(struct imx208 *imx208)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ int ret;
+
+ /* set stream off register */
+ ret = imx208_write_reg(imx208, IMX208_REG_MODE_SELECT,
+ IMX208_REG_VALUE_08BIT, IMX208_MODE_STANDBY);
+ if (ret)
+ dev_err(&client->dev, "%s failed to set stream\n", __func__);
+
+ /* Return success even if it was an error, as there is nothing the
+ * caller can do about it.
+ */
+ return 0;
+}
+
+static int imx208_set_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct imx208 *imx208 = to_imx208(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = 0;
+
+ mutex_lock(&imx208->mutex);
+ if (imx208->streaming == enable) {
+ mutex_unlock(&imx208->mutex);
+ return 0;
+ }
+
+ if (enable) {
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ goto err_unlock;
+ }
+
+ /*
+ * Apply default & customized values
+ * and then start streaming.
+ */
+ ret = imx208_start_streaming(imx208);
+ if (ret)
+ goto err_rpm_put;
+ } else {
+ imx208_stop_streaming(imx208);
+ pm_runtime_put(&client->dev);
+ }
+
+ imx208->streaming = enable;
+ mutex_unlock(&imx208->mutex);
+
+ return ret;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+err_unlock:
+ mutex_unlock(&imx208->mutex);
+
+ return ret;
+}
+
+static int __maybe_unused imx208_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx208 *imx208 = to_imx208(sd);
+
+ if (imx208->streaming)
+ imx208_stop_streaming(imx208);
+
+ return 0;
+}
+
+static int __maybe_unused imx208_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx208 *imx208 = to_imx208(sd);
+ int ret;
+
+ if (imx208->streaming) {
+ ret = imx208_start_streaming(imx208);
+ if (ret)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ imx208_stop_streaming(imx208);
+ imx208->streaming = 0;
+ return ret;
+}
+
+/* Verify chip ID */
+static int imx208_identify_module(struct imx208 *imx208)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ int ret;
+ u32 val;
+
+ ret = imx208_read_reg(imx208, IMX208_REG_CHIP_ID,
+ IMX208_REG_VALUE_16BIT, &val);
+ if (ret) {
+ dev_err(&client->dev, "failed to read chip id %x\n",
+ IMX208_CHIP_ID);
+ return ret;
+ }
+
+ if (val != IMX208_CHIP_ID) {
+ dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
+ IMX208_CHIP_ID, val);
+ return -EIO;
+ }
+
+ dev_err(&client->dev, "chip id!: %x %x\n", IMX208_CHIP_ID, val);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx208_video_ops = {
+ .s_stream = imx208_set_stream,
+};
+
+static const struct v4l2_subdev_pad_ops imx208_pad_ops = {
+ .enum_mbus_code = imx208_enum_mbus_code,
+ .get_fmt = imx208_get_pad_format,
+ .set_fmt = imx208_set_pad_format,
+ .enum_frame_size = imx208_enum_frame_size,
+};
+
+static const struct v4l2_subdev_ops imx208_subdev_ops = {
+ .video = &imx208_video_ops,
+ .pad = &imx208_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops imx208_internal_ops = {
+ .open = imx208_open,
+};
+
+/* Initialize control handlers */
+static int imx208_init_controls(struct imx208 *imx208)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
+ struct v4l2_ctrl_handler *ctrl_hdlr;
+ s64 exposure_max;
+ s64 vblank_def;
+ s64 vblank_min;
+ s64 pixel_rate_min;
+ s64 pixel_rate_max;
+ int ret;
+
+ ctrl_hdlr = &imx208->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
+ if (ret)
+ return ret;
+
+ mutex_init(&imx208->mutex);
+ ctrl_hdlr->lock = &imx208->mutex;
+ imx208->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr,
+ &imx208_ctrl_ops,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(link_freq_menu_items) - 1,
+ 0,
+ link_freq_menu_items);
+
+ if (imx208->link_freq)
+ imx208->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
+ pixel_rate_min = link_freq_to_pixel_rate(link_freq_menu_items[1]);
+ /* By default, PIXEL_RATE is read only */
+ imx208->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops,
+ V4L2_CID_PIXEL_RATE,
+ pixel_rate_min, pixel_rate_max,
+ 1, pixel_rate_max);
+
+
+ vblank_def = imx208->cur_mode->vts_def - imx208->cur_mode->height;
+ vblank_min = imx208->cur_mode->vts_min - imx208->cur_mode->height;
+ imx208->vblank = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_VBLANK,
+ vblank_min,
+ IMX208_VTS_MAX - imx208->cur_mode->height, 1,
+ vblank_def);
+
+ imx208->hblank = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_HBLANK,
+ IMX208_PPL_384MHZ - imx208->cur_mode->width,
+ IMX208_PPL_384MHZ - imx208->cur_mode->width,
+ 1,
+ IMX208_PPL_384MHZ - imx208->cur_mode->width);
+
+ if (imx208->hblank)
+ imx208->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ exposure_max = imx208->cur_mode->vts_def - 8;
+ imx208->exposure = v4l2_ctrl_new_std(
+ ctrl_hdlr, &imx208_ctrl_ops,
+ V4L2_CID_EXPOSURE, IMX208_EXPOSURE_MIN,
+ IMX208_EXPOSURE_MAX, IMX208_EXPOSURE_STEP,
+ IMX208_EXPOSURE_DEFAULT);
+
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
+ IMX208_ANA_GAIN_MIN, IMX208_ANA_GAIN_MAX,
+ IMX208_ANA_GAIN_STEP, IMX208_ANA_GAIN_DEFAULT);
+
+ v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
+ IMX208_DGTL_GAIN_MIN, IMX208_DGTL_GAIN_MAX,
+ IMX208_DGTL_GAIN_STEP,
+ IMX208_DGTL_GAIN_DEFAULT);
+
+ v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx208_ctrl_ops,
+ V4L2_CID_TEST_PATTERN,
+ ARRAY_SIZE(imx208_test_pattern_menu) - 1,
+ 0, 0, imx208_test_pattern_menu);
+
+ if (ctrl_hdlr->error) {
+ ret = ctrl_hdlr->error;
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto error;
+ }
+
+ imx208->sd.ctrl_handler = ctrl_hdlr;
+
+ return 0;
+
+error:
+ v4l2_ctrl_handler_free(ctrl_hdlr);
+ mutex_destroy(&imx208->mutex);
+
+ return ret;
+}
+
+static void imx208_free_controls(struct imx208 *imx208)
+{
+ v4l2_ctrl_handler_free(imx208->sd.ctrl_handler);
+ mutex_destroy(&imx208->mutex);
+}
+
+static int imx208_probe(struct i2c_client *client)
+{
+ struct imx208 *imx208;
+ int ret;
+ u32 val = 0;
+
+ device_property_read_u32(&client->dev, "clock-frequency", &val);
+ if (val != 19200000)
+ return -EINVAL;
+
+ imx208 = devm_kzalloc(&client->dev, sizeof(*imx208), GFP_KERNEL);
+ if (!imx208)
+ return -ENOMEM;
+
+ /* Initialize subdev */
+ v4l2_i2c_subdev_init(&imx208->sd, client, &imx208_subdev_ops);
+
+ /* Check module identity */
+ ret = imx208_identify_module(imx208);
+ if (ret)
+ return ret;
+
+ /* Set default mode to max resolution */
+ imx208->cur_mode = &supported_modes[0];
+
+ ret = imx208_init_controls(imx208);
+ if (ret)
+ return ret;
+
+ /* Initialize subdev */
+ imx208->sd.internal_ops = &imx208_internal_ops;
+ imx208->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ imx208->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+
+ /* Initialize source pad */
+ imx208->pad.flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_init(&imx208->sd.entity, 1, &imx208->pad, 0);
+ if (ret) {
+ dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
+ goto error_handler_free;
+ }
+
+ ret = v4l2_async_register_subdev_sensor_common(&imx208->sd);
+ if (ret < 0)
+ goto error_media_entity;
+
+ pm_runtime_set_active(&client->dev);
+ pm_runtime_enable(&client->dev);
+ pm_runtime_idle(&client->dev);
+
+ return 0;
+
+error_media_entity:
+ media_entity_cleanup(&imx208->sd.entity);
+
+error_handler_free:
+ imx208_free_controls(imx208);
+
+ return ret;
+}
+
+static int imx208_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx208 *imx208 = to_imx208(sd);
+
+ v4l2_async_unregister_subdev(sd);
+ media_entity_cleanup(&sd->entity);
+ imx208_free_controls(imx208);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops imx208_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx208_suspend, imx208_resume)
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id imx208_acpi_ids[] = {
+ { "INT3478" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(acpi, imx208_acpi_ids);
+#endif
+
+static struct i2c_driver imx208_i2c_driver = {
+ .driver = {
+ .name = "imx208",
+ .pm = &imx208_pm_ops,
+ .acpi_match_table = ACPI_PTR(imx208_acpi_ids),
+ },
+ .probe_new = imx208_probe,
+ .remove = imx208_remove,
+};
+
+module_i2c_driver(imx208_i2c_driver);
+
+MODULE_AUTHOR("Yeh, Andy <andy.yeh@xxxxxxxxx>");
+MODULE_AUTHOR("Chen, Ping-chung <ping-chung.chen@xxxxxxxxx>");
+MODULE_DESCRIPTION("Sony IMX208 sensor driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
