Add driver and bindings for the OV2680 2 megapixel CMOS 1/5" sensor, which has
a single MIPI lane interface and output format of 10-bit Raw RGB.
Features supported are described in PATCH 2/2.
v7->v6:
Fixes for compilation:
- compilation fixes when SUBDEV_API is not enabled
v5->v6:
Fabio Estevam:
- add power supplies (code and bindings)
- fix csi gpio polarity (code and bindings)
- rename powerdown to reset gpio
- Removed Rob Herring Reviewed-by tag, since bindings have changed since his
ack.
v4->v5:
Fixes for v4l2-compliance tests:
- add init_cfg
- add some input arguments validations
- fix format_try set
v3->v4:
Sakari Ailus:
- remove auto_{exposure|gain}_enable and direct call the set functions
- add separe control sets to gain and exposure
- fix number of controls allocated
- check the exact frequency that it is supported
v2->v3:
Rob Herring:
- add Reviewed-by tag to dts PATCH 1/1
Sakari Ailus:
- align register values with bracket
- redone the {write|read}_reg i2c functions
- add bayer order handling with flip and mirror controls
- fix error path in probe release resources
- remove i2c_device_id and use probe_new
Myself:
- remove ; at the end of macros
v1->v2:
Fabio Estevam:
- s/OV5640/OV2680 in PATCH 1/2 changelog
Sakari Ailus:
- add description on endpoint properties in bindings
- add single endpoint in bindings
- drop OF dependency
- cleanup includes
- fix case in Color Bars
- remove frame rate selection
- 8/16/24 bit register access in the same transaction
- merge _reset and _soft_reset to _enable and rename it to power_on
- _gain_set use only the gain value (drop & 0x7ff)
- _gain_get remove the (0x377)
- single write/read at _exposure_set/get use write_reg24/read_reg24
- move mode_set_direct to _mode_set
- _mode_set set auto exposure/gain based on ctrl value
- s_frame_interval equal to g_frame_interval
- use closest match from: v4l: common: Add a function to obtain best size from a list
- check v4l2_ctrl_new_std return in _init
- fix gain manual value in auto_cluster
Cheers,
Rui
Rui Miguel Silva (2):
media: ov2680: dt: Add bindings for OV2680
media: ov2680: Add Omnivision OV2680 sensor driver
.../devicetree/bindings/media/i2c/ov2680.txt | 46 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov2680.c | 1186 +++++++++++++++++
4 files changed, 1245 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt
create mode 100644 drivers/media/i2c/ov2680.c
--
2.18.0
