Guillem Aranda wrote:
Sorry for the noise,
The sooner I wrote the email, the sooner my TeviiS470 started to work!
I did it work with the latest s2-liplianin tip, of course firmwares
were in /lib/firmware dir.
Now I'm doing some compatibility tests. As I said I can get a few less
channels than with the saa7164 that I'm using in old computers.
My aim is to certify it for the company I work for, so if there is
something I could do testing it to help the community, I could do it
during my work journey.
regards,
Guillem
On Thu, Dec 10, 2009 at 7:35 PM, Igor M. Liplianin <liplianin@xxxxx
<mailto:liplianin@xxxxx>> wrote:
On 10 декабря 2009 18:47:09 Guillem Solà wrote:
> Hi,
>
> I come to this list as my last resort. I have two DVB-S PCIE
cards and
> no one can get channels, but I have another computer with a PCI
SAA7146
> that can get 1400 services from same dish.
>
> * Tveii S470 *
>
> One is the Tveii S470. I guess that the S470 should work because
you are
> working in IR support.
>
> I have tried V4L tip, drivers from website, from website and patched
> like in wiki says... but all I get is:
>
> scandvb -a 0 /usr/share/dvb-apps/dvb-s/Astra-19.2E
>
> scanning /usr/share/dvb-apps/dvb-s/Astra-19.2E
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> initial transponder 12551500 V 22000000 5
>
> >>> tune to: 12551:v:0:22000
>
> WARNING: filter timeout pid 0x0011
> WARNING: filter timeout pid 0x0000
> WARNING: filter timeout pid 0x0010it's going on
>
> dumping lists (0 services)
>
> Done.
>
>
> * DVBWorld 2005 *
>
> The other is the DVBWorld DVB-S2 2005. I have tried also latest V4l,
> liplianin branch... and I get the same: 0 services.
>
>
> The hardware were I'm trying to run this is a Dell 1 unit Rack
Server
> with RHEL with kernels 2.6.30, 2.6.31 and 2.6.32 patched by myself.
>
> As I said I have another computer with a PCI dvb-s card that can
get lot
> of channels so I thing that the disk is working well.
>
>
> Any idea about what's going on?
Hi Guillem,
I think you are missing firmwares, though you give too little
information.
>
> Thanks in advance,
>
> Guillem Solà
> --
> To unsubscribe from this list: send the line "unsubscribe
linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
<mailto:majordomo@xxxxxxxxxxxxxxx>
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
Hi,
I have been testing my TeviiS470 against the saa7164 and basically what
I get is that the signal and s/n ratio is lower tuning from the same
dish with TeviiS470.
For example tuning the same channel on each one and comparing the femon
output:
On saa7164 AragonTv from Astra works well
FE: ST STV0299 DVB-S (SAT)
status 1f | signal e600 | snr edba | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal e4c0 | snr ed84 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal e73e | snr ed5a | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal e607 | snr ed0c | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal e608 | snr ee02 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal e607 | snr edf3 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
On TeviiS470 the same channel have some problems :
FE: Montage Technology DS3000/TS2020 (SAT)
status 1f | signal 9088 | snr 51e0 | ber 00000000 | unc 00001010 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 51e0 | ber 00003f67 | unc 00005669 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 51e0 | ber 0000400e | unc 000056ed |
FE_HAS_LOCK
status 00 | signal 9088 | snr 51e0 | ber 00003f84 | unc 000056ec |
status 1f | signal 9088 | snr 51e0 | ber 00003ebb | unc 000056cb |
FE_HAS_LOCK
status 1f | signal 9088 | snr 51e0 | ber 00004057 | unc 00005507 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 51e0 | ber 00004083 | unc 000056d1 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 51e0 | ber 00003e63 | unc 000056bc |
FE_HAS_LOCK
status 1f | signal 9088 | snr 51e0 | ber 00003fe9 | unc 000056be |
FE_HAS_LOCK
Here femon output of a channel that works better than the last one
FE: Montage Technology DS3000/TS2020 (SAT)
status 1f | signal 9088 | snr 7ad0 | ber 000002dc | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 7ad0 | ber 0000024a | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 8f48 | ber 00000262 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 8f48 | ber 00000314 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 8f48 | ber 000002db | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 8f48 | ber 000002ed | unc 00000000 |
FE_HAS_LOCK
status 1f | signal 9088 | snr 8f48 | ber 000003a3 | unc 00000000 |
FE_HAS_LOCK
FE: ST STV0299 DVB-S (SAT)
status 1f | signal eafb | snr e835 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal ec38 | snr e820 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal eafe | snr e7c9 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal eafd | snr e7d2 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal e9c2 | snr e7d8 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal ec39 | snr e7d8 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal eaf4 | snr e7e4 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
status 1f | signal eaf3 | snr e7b7 | ber 00000000 | unc 00000000 |
FE_HAS_LOCK
Basically that's what happens on all the channels I tried, the signal
strength and s/n ratio is lower with TeviiS470 than with saa7164.
regards,
Guillem
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
