On Tue, 2018-06-26 at 17:33 +0100, Sean Young wrote:
> On Tue, Jun 26, 2018 at 04:39:51PM +0200, Jerome Brunet wrote:
> > On Tue, 2018-06-26 at 15:37 +0100, Sean Young wrote:
> > > On Tue, Jun 19, 2018 at 04:09:20PM +0200, Jerome Brunet wrote:
> > > > On Tue, 2018-06-19 at 13:57 +0100, Sean Young wrote:
> > > > > On Tue, Jun 19, 2018 at 02:08:12PM +0200, Jerome Brunet wrote:
> > > > > > On Sat, 2018-05-12 at 11:55 +0100, Sean Young wrote:
> > > > > > > Report an error if this is not the case or any problem with the generated
> > > > > > > raw events.
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Since the inclusion of this patch, every 3 to 15 seconds, I get the following
> > > > > > message:
> > > > > >
> > > > > > "rc rc0: two consecutive events of type space"
> > > > > >
> > > > > > on the console of amlogic s400 platform (arch/arm64/boot/dts/amlogic/meson-axg-
> > > > > > s400.dts). I don't know much about ir protocol and surely there is something
> > > > > > worth investigating in the related driver, but ...
> > > > > >
> > > > > > >
> > > > > > > Signed-off-by: Sean Young <sean@xxxxxxxx>
> > > > > > > ---
> > > > > > > drivers/media/rc/rc-ir-raw.c | 19 +++++++++++++++----
> > > > > > > 1 file changed, 15 insertions(+), 4 deletions(-)
> > > > > > >
> > > > > > > diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
> > > > > > > index 2e50104ae138..49c56da9bc67 100644
> > > > > > > --- a/drivers/media/rc/rc-ir-raw.c
> > > > > > > +++ b/drivers/media/rc/rc-ir-raw.c
> > > > > > > @@ -22,16 +22,27 @@ static int ir_raw_event_thread(void *data)
> > > > > > > {
> > > > > > > struct ir_raw_event ev;
> > > > > > > struct ir_raw_handler *handler;
> > > > > > > - struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
> > > > > > > + struct ir_raw_event_ctrl *raw = data;
> > > > > > > + struct rc_dev *dev = raw->dev;
> > > > > > >
> > > > > > > while (1) {
> > > > > > > mutex_lock(&ir_raw_handler_lock);
> > > > > > > while (kfifo_out(&raw->kfifo, &ev, 1)) {
> > > > > > > + if (is_timing_event(ev)) {
> > > > > > > + if (ev.duration == 0)
> > > > > > > + dev_err(&dev->dev, "nonsensical timing event of duration 0");
> > > > > > > + if (is_timing_event(raw->prev_ev) &&
> > > > > > > + !is_transition(&ev, &raw->prev_ev))
> > > > > > > + dev_err(&dev->dev, "two consecutive events of type %s",
> > > > > > > + TO_STR(ev.pulse));
> > > > > > > + if (raw->prev_ev.reset && ev.pulse == 0)
> > > > > > > + dev_err(&dev->dev, "timing event after reset should be pulse");
> > > > > > > + }
> > > > > >
> > > > > > ... considering that we continue the processing as if nothing happened, is it
> > > > > > really an error ?
> > > > > >
> > > > > > Could we consider something less invasive ? like dev_dbg() or dev_warn_once() ?
> > > > >
> > > > > Maybe it should be dev_warn(). The fact that it is not dev_warn_once() means
> > > > > that we now know this occurs regularly.
> > > >
> > > > It seems weird to report this over and over again.
> > > >
> > > > >
> > > > > Would you mind testing the following patch please?
> > > > >
> > > > > Thanks
> > > > >
> > > > > Sean
> > > > >
> > > > > From 6a44fbe4738d230b9cf378777e7e9a93e5fda726 Mon Sep 17 00:00:00 2001
> > > > > From: Sean Young <sean@xxxxxxxx>
> > > > > Date: Tue, 19 Jun 2018 13:50:36 +0100
> > > > > Subject: [PATCH] media: rc: meson: rc rc0: two consecutive events of type
> > > > > space
> > > > >
> > > > > The meson generates one edge per interrupt. The duration is encoded in 12
> > > > > bits of 10 microseconds, so it can only encoding a maximum of 40
> > > > > milliseconds. As a result, it can produce multiple space events.
> > > > >
> > > > > Signed-off-by: Sean Young <sean@xxxxxxxx>
> > > > > ---
> > > > > drivers/media/rc/meson-ir.c | 3 ++-
> > > > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
> > > > > index f449b35d25e7..9747426719b2 100644
> > > > > --- a/drivers/media/rc/meson-ir.c
> > > > > +++ b/drivers/media/rc/meson-ir.c
> > > > > @@ -97,7 +97,8 @@ static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
> > > > > status = readl_relaxed(ir->reg + IR_DEC_STATUS);
> > > > > rawir.pulse = !!(status & STATUS_IR_DEC_IN);
> > > > >
> > > > > - ir_raw_event_store_with_timeout(ir->rc, &rawir);
> > > > > + if (ir_raw_event_store_with_filter(ir->rc, &rawir))
> > > > > + ir_raw_event_handle(ir->rc);
> > > > >
> > > > > spin_unlock(&ir->lock);
> > > > >
> > > >
> > > > Solve the problem on meson. Thx
> > > > Feel free to add this submitting the patch
> > >
> > > Actually this patch is broken. ir_raw_event_store_with_timeout() generates
> > > IR timeouts, but ir_raw_event_store_with_filter() does not.
> > >
> > > So this will need some rethinking. I think we need a
> > > ir_raw_event_store_with_timeout_with_filter() but that is getting silly now.
> > >
> > > Maybe filter should be a boolean property of an rc device and happen
> > > transparently. I'll write something like that when I get some time.
> > >
> >
> > would you still object to use dev_warn_once() in the meantime ?
> > Console flooding is quite annoying.
>
> Yes, as much as I dislike it, I think that is the right solution for now.
>
> Thanks,
>
> Sean
>
> From 2f61a8b6e850e34def282f1cbd1bfee0f5ab66c5 Mon Sep 17 00:00:00 2001
> From: Sean Young <sean@xxxxxxxx>
> Date: Tue, 26 Jun 2018 16:03:18 +0100
> Subject: [PATCH] media: rc: be less noisy when driver misbehaves
>
> Since commit 48231f289e52 ("media: rc: drivers should produce alternate
> pulse and space timing events"), on meson-ir we are regularly producing
> errors. Reduce to warning level and only warn once to avoid flooding
> the log.
>
> A proper fix for meson-ir is going to be too large for v4.18.
>
> Signed-off-by: Sean Young <sean@xxxxxxxx>
Tested-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> ---
> drivers/media/rc/rc-ir-raw.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
> index 2e0066b1a31c..e7948908e78c 100644
> --- a/drivers/media/rc/rc-ir-raw.c
> +++ b/drivers/media/rc/rc-ir-raw.c
> @@ -30,13 +30,13 @@ static int ir_raw_event_thread(void *data)
> while (kfifo_out(&raw->kfifo, &ev, 1)) {
> if (is_timing_event(ev)) {
> if (ev.duration == 0)
> - dev_err(&dev->dev, "nonsensical timing event of duration 0");
> + dev_warn_once(&dev->dev, "nonsensical timing event of duration 0");
> if (is_timing_event(raw->prev_ev) &&
> !is_transition(&ev, &raw->prev_ev))
> - dev_err(&dev->dev, "two consecutive events of type %s",
> - TO_STR(ev.pulse));
> + dev_warn_once(&dev->dev, "two consecutive events of type %s",
> + TO_STR(ev.pulse));
> if (raw->prev_ev.reset && ev.pulse == 0)
> - dev_err(&dev->dev, "timing event after reset should be pulse");
> + dev_warn_once(&dev->dev, "timing event after reset should be pulse");
> }
> list_for_each_entry(handler, &ir_raw_handler_list, list)
> if (dev->enabled_protocols &
