m-karicheri2@xxxxxx writes:
> From: Muralidharan Karicheri <m-karicheri2@xxxxxx>
>
> v1 - updated based on comments from Vaibhav Hiremath.
>
> On DM365 we use only vpss master clock, where as on DM355 and
> DM6446, we use vpss master and slave clocks for vpfe capture and AM3517
> we use internal clock and pixel clock. So this patch makes it configurable
> on a per platform basis. This is needed for supporting DM365 for which patches
> will be available soon.
>
> Tested-by: Vaibhav Hiremath <hvaibhav@xxxxxx>, Muralidharan Karicheri <m-karicheri2@xxxxxx>
> Acked-by: Vaibhav Hiremath <hvaibhav@xxxxxx>
> Signed-off-by: Muralidharan Karicheri <m-karicheri2@xxxxxx>
Sorry for jumping late into this thread, but I have a couple comments.
First, we should *never* pass clock names from platform code to driver
code. We have the clkdevs for this. Using clkdev, the right clock
is determined from the driver being used and any additional info.
Rather than passing the strings along, you should add the driver name
to the 'dev_id' field of the clkdev node, and then use the 'con_id' field
to distinguish between the two clocks:
- CLK(NULL, "vpss_master", &vpss_master_clk),
- CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK("vpfe-capture", "master", &vpss_master_clk),
+ CLK("vpfe-capture", "slave", &vpss_slave_clk),
NOTE: this assumes clks are used from VPFE. When you move to CCDC, this
should change accordingly.
More on the usage below...
> ---
> drivers/media/video/davinci/vpfe_capture.c | 98 +++++++++++++++++----------
> include/media/davinci/vpfe_capture.h | 11 ++-
> 2 files changed, 70 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
> index 12a1b3d..c3468ee 100644
> --- a/drivers/media/video/davinci/vpfe_capture.c
> +++ b/drivers/media/video/davinci/vpfe_capture.c
> @@ -1787,61 +1787,87 @@ static struct vpfe_device *vpfe_initialize(void)
> return vpfe_dev;
> }
>
> +/**
> + * vpfe_disable_clock() - Disable clocks for vpfe capture driver
> + * @vpfe_dev - ptr to vpfe capture device
> + *
> + * Disables clocks defined in vpfe configuration.
> + */
> static void vpfe_disable_clock(struct vpfe_device *vpfe_dev)
> {
> struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
> + int i;
>
> - clk_disable(vpfe_cfg->vpssclk);
> - clk_put(vpfe_cfg->vpssclk);
> - clk_disable(vpfe_cfg->slaveclk);
> - clk_put(vpfe_cfg->slaveclk);
> - v4l2_info(vpfe_dev->pdev->driver,
> - "vpfe vpss master & slave clocks disabled\n");
> + for (i = 0; i < vpfe_cfg->num_clocks; i++) {
> + clk_disable(vpfe_dev->clks[i]);
> + clk_put(vpfe_dev->clks[i]);
While cleaning this up, you should move the clk_put() to module
disable/unload time. You dont' need to put he clock on every disable.
The same for clk_get(). You don't need to get the clock for every
enable. Just do a clk_get() at init time.
> + }
> + kfree(vpfe_dev->clks);
> + v4l2_info(vpfe_dev->pdev->driver, "vpfe capture clocks disabled\n");
> }
>
> +/**
> + * vpfe_enable_clock() - Enable clocks for vpfe capture driver
> + * @vpfe_dev - ptr to vpfe capture device
> + *
> + * Enables clocks defined in vpfe configuration. The function
> + * assumes that at least one clock is to be defined which is
> + * true as of now. re-visit this if this assumption is not true
> + */
> static int vpfe_enable_clock(struct vpfe_device *vpfe_dev)
> {
> struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
> - int ret = -ENOENT;
> + int i;
>
> - vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master");
Using my clkdevs from above, you just need to change this to:
vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "master");
Now that the device name is in the clkdev node, clk_get() will
find the right clock based on the device name.
> - if (NULL == vpfe_cfg->vpssclk) {
> - v4l2_err(vpfe_dev->pdev->driver, "No clock defined for"
> - "vpss_master\n");
> - return ret;
> - }
> + if (!vpfe_cfg->num_clocks)
> + return 0;
>
> - if (clk_enable(vpfe_cfg->vpssclk)) {
> - v4l2_err(vpfe_dev->pdev->driver,
> - "vpfe vpss master clock not enabled\n");
> - goto out;
> - }
> - v4l2_info(vpfe_dev->pdev->driver,
> - "vpfe vpss master clock enabled\n");
> + vpfe_dev->clks = kzalloc(vpfe_cfg->num_clocks *
> + sizeof(struct clock *), GFP_KERNEL);
>
> - vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave");
And here:
vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "slave");
> - if (NULL == vpfe_cfg->slaveclk) {
> - v4l2_err(vpfe_dev->pdev->driver,
> - "No clock defined for vpss slave\n");
> - goto out;
> + if (NULL == vpfe_dev->clks) {
> + v4l2_err(vpfe_dev->pdev->driver, "Memory allocation failed\n");
> + return -ENOMEM;
> }
>
> - if (clk_enable(vpfe_cfg->slaveclk)) {
> - v4l2_err(vpfe_dev->pdev->driver,
> - "vpfe vpss slave clock not enabled\n");
> - goto out;
> + for (i = 0; i < vpfe_cfg->num_clocks; i++) {
> + if (NULL == vpfe_cfg->clocks[i]) {
> + v4l2_err(vpfe_dev->pdev->driver,
> + "clock %s is not defined in vpfe config\n",
> + vpfe_cfg->clocks[i]);
> + goto out;
> + }
> +
> + vpfe_dev->clks[i] = clk_get(vpfe_dev->pdev,
> + vpfe_cfg->clocks[i]);
> + if (NULL == vpfe_dev->clks[i]) {
> + v4l2_err(vpfe_dev->pdev->driver,
> + "Failed to get clock %s\n",
> + vpfe_cfg->clocks[i]);
> + goto out;
> + }
> +
> + if (clk_enable(vpfe_dev->clks[i])) {
> + v4l2_err(vpfe_dev->pdev->driver,
> + "vpfe clock %s not enabled\n",
> + vpfe_cfg->clocks[i]);
> + goto out;
> + }
> +
> + v4l2_info(vpfe_dev->pdev->driver, "vpss clock %s enabled",
> + vpfe_cfg->clocks[i]);
> }
> - v4l2_info(vpfe_dev->pdev->driver, "vpfe vpss slave clock enabled\n");
> return 0;
> out:
> - if (vpfe_cfg->vpssclk)
> - clk_put(vpfe_cfg->vpssclk);
> - if (vpfe_cfg->slaveclk)
> - clk_put(vpfe_cfg->slaveclk);
> -
> - return -1;
> + for (i = 0; i < vpfe_cfg->num_clocks; i++) {
> + if (vpfe_dev->clks[i])
> + clk_put(vpfe_dev->clks[i]);
> + }
> + kfree(vpfe_dev->clks);
> + return -EFAULT;
> }
>
> +
> /*
> * vpfe_probe : This function creates device entries by register
> * itself to the V4L2 driver and initializes fields of each
> diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
> index d863e5e..7b62a5c 100644
> --- a/include/media/davinci/vpfe_capture.h
> +++ b/include/media/davinci/vpfe_capture.h
> @@ -31,8 +31,6 @@
> #include <media/videobuf-dma-contig.h>
> #include <media/davinci/vpfe_types.h>
>
> -#define VPFE_CAPTURE_NUM_DECODERS 5
> -
> /* Macros */
> #define VPFE_MAJOR_RELEASE 0
> #define VPFE_MINOR_RELEASE 0
> @@ -91,9 +89,14 @@ struct vpfe_config {
> char *card_name;
> /* ccdc name */
> char *ccdc;
> - /* vpfe clock */
> + /* vpfe clock. Obsolete! Will be removed in next patch */
I'd drop these comment additions and just comment in the follow up patch
why they were removed.
> struct clk *vpssclk;
> + /* Obsolete! Will be removed in next patch */
> struct clk *slaveclk;
> + /* number of clocks */
> + int num_clocks;
> + /* clocks used for vpfe capture */
> + char *clocks[];
> };
>
> struct vpfe_device {
> @@ -104,6 +107,8 @@ struct vpfe_device {
> struct v4l2_subdev **sd;
> /* vpfe cfg */
> struct vpfe_config *cfg;
> + /* clock ptrs for vpfe capture */
> + struct clk **clks;
> /* V4l2 device */
> struct v4l2_device v4l2_dev;
> /* parent device */
> --
> 1.6.0.4
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
