Hello Yamada-san, Thank you for your review and comments. I'll fix this mail and other your replies! Regards, -- Katsuhiro Suzuki > -----Original Message----- > From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> > Sent: Saturday, June 2, 2018 6:50 PM > To: Suzuki, Katsuhiro/鈴木 勝博 <suzuki.katsuhiro@xxxxxxxxxxxxx> > Cc: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>; > linux-media@xxxxxxxxxxxxxxx; Masami Hiramatsu <masami.hiramatsu@xxxxxxxxxx>; > Jassi Brar <jaswinder.singh@xxxxxxxxxx>; linux-arm-kernel > <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; Linux Kernel Mailing List > <linux-kernel@xxxxxxxxxxxxxxx> > Subject: Re: [PATCH 1/8] media: uniphier: add DT bindings documentation for UniPhier > HSC > > 2018-05-30 18:09 GMT+09:00 Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx>: > > This patch adds DT binding documentation for UniPhier HSC which is > > MPEG2-TS input/output and demux subsystem. > > > > Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@xxxxxxxxxxxxx> > > --- > > .../bindings/media/uniphier,hsc.txt | 38 +++++++++++++++++++ > > 1 file changed, 38 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/uniphier,hsc.txt > > > > diff --git a/Documentation/devicetree/bindings/media/uniphier,hsc.txt > b/Documentation/devicetree/bindings/media/uniphier,hsc.txt > > new file mode 100644 > > index 000000000000..4242483b2ecc > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/uniphier,hsc.txt > > @@ -0,0 +1,38 @@ > > +Socionext UniPhier HSC (High-speed Stream Controller) > > + > > +The Socionext UniPhier HSC subsystem consists of MPEG2-TS input/output and > > +demultiplexer cores in the same register space. > > + > > +This interface is support TS serial signals (clock, valid, sync, data) from > > +external demodulators. > > + > > +Required properties: > > +- compatible : should be one of the following: > > + "socionext,uniphier-ld11-hsc" > > + "socionext,uniphier-ld20-hsc" > > +- reg : offset and length of the register set for the device. > > +- interrupts : should contain DMA and TSI error interrupt. > > +- pinctrl-names : should be "default". > > +- pinctrl-0 : defined TS serial signal pins for external demodulators. > > +- clock-names : should include following entries: > > > "the following entries:" > > > > > + "hsc", "stdmac" > > +- clocks : a list of phandle, should contain an entry for each > > + entry in clock-names. > > +- reset-names : should include following entries: > > > Ditto. > > > > > + "hsc", "stdmac" > > +- resets : a list of phandle, should contain an entry for each > > + entry in reset-names. > > + > > +Example: > > + hsc { > > + compatible = "socionext,uniphier-ld20-hsc"; > > + reg = <0x5c000000 0x100000>; > > + interrupts = <0 100 4>, <0 101 4>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_hscin2_s>, > > + <&pinctrl_hscin3_s>; > > + clock-names = "stdmac", "hsc"; > > + clocks = <&sys_clk 8>, <&sys_clk 9>; > > + reset-names = "stdmac", "hsc"; > > + resets = <&sys_rst 8>, <&sys_rst 9>; > > + }; > > -- > > 2.17.0 > > > > > > -- > Best Regards > Masahiro Yamada