Hi Jagan, On Thu, May 31, 2018 at 08:39:20PM +0530, Jagan Teki wrote: > Hi All, > > I'm trying to verify MIPI-CSI2 OV5640 camera on i.MX6 platform with > Mainline Linux. > > I've followed these[1] instructions to configure MC links and pads > based on the probing details from dmesg and trying to capture > ipu1_ic_prpenc capture (/dev/video1) but it's not working. > > Can anyone help me to verify whether I configured all the details > properly if not please suggest. > > I'm pasting full log here, so-that anyone can comment in line and dt > changes are at [2] > > Log: > ----- [...] > # media-ctl -l "'ov5640 2-003c':0 -> 'imx6-mipi-csi2':0[1]" > # media-ctl -l "'imx6-mipi-csi2':2 -> 'ipu1_csi1':0[1]" > # media-ctl -l "'ipu1_csi1':1 -> 'ipu1_ic_prp':0[1]" > # media-ctl -l "'ipu1_ic_prp':1 -> 'ipu1_ic_prpenc':0[1]" > # media-ctl -l "'ipu1_ic_prpenc':1 -> 'ipu1_ic_prpenc capture':0[1]" Here you configure a pipeline that ends at ipu1 prpenc capture ... > # med# media-ctl -p [...] > - entity 18: ipu1_ic_prpenc capture (1 pad, 1 link) > type Node subtype V4L flags 0 > device node name /dev/video0 ... which is /dev/video0 ... [...] > - entity 27: ipu1_ic_prpvf capture (1 pad, 1 link) > type Node subtype V4L flags 0 > device node name /dev/video1 ... not /dev/video1 ... [...] > # GST_DEBUG="v4l2*:5" gst-launch-1.0 -v v4l2src device=/dev/video1 ! \ > > autovideosink ... and then you try to capture from prpvf, which is not part of a configured pipeline. regards Philipp
