Doing writes when the device is disabled seems to be a NOOP.
Let's enable the device, write the values, and then disable it on init.
This changes the behavior for wake device, which is now being disabled
after init.
Signed-off-by: Michał Winiarski <michal.winiarski@xxxxxxxxx>
Cc: Jarod Wilson <jarod@xxxxxxxxxx>
Cc: Sean Young <sean@xxxxxxxx>
---
drivers/media/rc/nuvoton-cir.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index eebd6fef5602..61b68cde35f1 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -535,6 +535,8 @@ static void nvt_set_cir_iren(struct nvt_dev *nvt)
static void nvt_cir_regs_init(struct nvt_dev *nvt)
{
+ nvt_enable_logical_dev(nvt, LOGICAL_DEV_CIR);
+
/* set sample limit count (PE interrupt raised when reached) */
nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH);
nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL);
@@ -546,10 +548,14 @@ static void nvt_cir_regs_init(struct nvt_dev *nvt)
/* clear hardware rx and tx fifos */
nvt_clear_cir_fifo(nvt);
nvt_clear_tx_fifo(nvt);
+
+ nvt_disable_logical_dev(nvt, LOGICAL_DEV_CIR);
}
static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
{
+ nvt_enable_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+
/*
* Disable RX, set specific carrier on = low, off = high,
* and sample period (currently 50us)
@@ -562,8 +568,7 @@ static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
/* clear any and all stray interrupts */
nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
- /* enable the CIR WAKE logical device */
- nvt_enable_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+ nvt_disable_logical_dev(nvt, LOGICAL_DEV_CIR);
}
static void nvt_enable_wake(struct nvt_dev *nvt)
--
2.17.0
