Hello:
I've had a Sky2PC (ver 3.1) DVB-S card kicking around for a while and
I'd like to get it operational.
According to the v4l-dvb wiki, this card requires a definition, and to
post the details to the linuxtv mailing list, so here goes..
Thank you.
Sandy MacDonald
On the back of the card:
Model: SKY2PC
P/N: 92105-20101
Rev: 3.1
Serial no. and MAC address
The front of the card:
DBC1201 (on the metal shielding), nothing else.
Main chip: B2C2 Flexcop III
M3B9E-001 0215
lspci -v
01:0e.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopIII
DVB chip / Technisat SkyStar2 DVB card (rev 01)
Subsystem: Techsan Electronics Co Ltd Device 2104
Flags: bus master, slow devsel, latency 64, IRQ 10
Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 3400 [size=32]
lspci -vn
01:0e.0 0280: 13d0:2200 (rev 01)
Subsystem: 13d0:2104
Flags: bus master, slow devsel, latency 64, IRQ 10
Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 3400 [size=32]
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
