Re: [PATCH v2 04/15] clk: imx7d: reset parent for mipi csi root

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 23, 2018 at 02:47:39PM +0100, Rui Miguel Silva wrote:
> To guarantee that we do not get Overflow in image FIFO the outer bandwidth has
> to be faster than inputer bandwidth. For that it must be possible to set a
> faster frequency clock. So set new parent to sys_pfd3 clock for the mipi csi
> block.
> 
> Cc: linux-clk@xxxxxxxxxxxxxxx
> Signed-off-by: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
> ---
>  drivers/clk/imx/clk-imx7d.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c
> index f7f4db2e6fa6..9a1a18ceb132 100644
> --- a/drivers/clk/imx/clk-imx7d.c
> +++ b/drivers/clk/imx/clk-imx7d.c
> @@ -891,6 +891,9 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
>  	clk_set_parent(clks[IMX7D_PLL_AUDIO_MAIN_BYPASS], clks[IMX7D_PLL_AUDIO_MAIN]);
>  	clk_set_parent(clks[IMX7D_PLL_VIDEO_MAIN_BYPASS], clks[IMX7D_PLL_VIDEO_MAIN]);
>  
> +	clk_set_parent(clks[IMX7D_MIPI_CSI_ROOT_SRC],
> +		       clks[IMX7D_PLL_SYS_PFD3_CLK]);
> +

For i.MX clock driver, we intentionally ignore line over 80 columns
warning to make the file easier for read.  So I would suggest you keep
it on a single line to stay consistent with other clk_set_parent() calls.

Other than that,

Acked-by: Shawn Guo <shawnguo@xxxxxxxxxx>

>  	/* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */
>  	clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);
>  
> -- 
> 2.17.0
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux