Hi Laurent,
On 23/04/18 10:08, Laurent Pinchart wrote:
> Hi Kieran,
>
> On Monday, 23 April 2018 11:59:04 EEST Kieran Bingham wrote:
>> On 21/04/18 13:44, Laurent Pinchart wrote:
>>> The pixel rate, as reported by the V4L2_CID_PIXEL_RATE control, must
>>> include both horizontal and vertical blanking. Both the AFE and HDMI
>>> receiver program it incorrectly:
>>>
>>> - The HDMI receiver goes to the trouble of removing blanking to compute
>>> the rate of active pixels. This is easy to fix by removing the
>>> computation and returning the incoming pixel clock rate directly.
>>>
>>> - The AFE performs similar calculation, while it should simply return
>>> the fixed pixel rate for analog sources, mandated by the ADV748x to be
>>> 28.63636 MHz.
>>>
>>> Signed-off-by: Laurent Pinchart
>>> <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>>
>> This looks quite reasonable, and simplifies the code. Win win.
>>
>> I presume this will have implications on the pixel receiver side (VIN in our
>> case)... are there changes required there, or was it 'just wrong' here.
>
> No change should be required on the VIN side. This patch was prompted by a BSP
> patch for VIN that aimed at fixing the same issue, but in the wrong location.
> See message 2461975.rTQ0tvdgNJ@avalon in the "[periperi] 2018-04-05 Multimedia
> group chat report" thread (Date: Sat, 21 Apr 2018 15:49:49 +0300).
>
>> Either way,
>>
>> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
> As you maintain the adv748x driver, could you make sure this patch gets
> upstream ? :-)
Yes, that's fine.
I'll collect the patch and test it the next time I spin up a Salvator-XS.
Regards
Kieran
>>> ---
>>>
>>> drivers/media/i2c/adv748x/adv748x-afe.c | 11 +++++------
>>> drivers/media/i2c/adv748x/adv748x-hdmi.c | 8 +-------
>>> 2 files changed, 6 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c
>>> b/drivers/media/i2c/adv748x/adv748x-afe.c index
>>> 61514bae7e5c..3e18d5ae813b 100644
>>> --- a/drivers/media/i2c/adv748x/adv748x-afe.c
>>> +++ b/drivers/media/i2c/adv748x/adv748x-afe.c
>>> @@ -321,17 +321,16 @@ static const struct v4l2_subdev_video_ops
>>> adv748x_afe_video_ops = {
>>> static int adv748x_afe_propagate_pixelrate(struct adv748x_afe *afe)
>>> {
>>> struct v4l2_subdev *tx;
>>> - unsigned int width, height, fps;
>>>
>>> tx = adv748x_get_remote_sd(&afe->pads[ADV748X_AFE_SOURCE]);
>>> if (!tx)
>>> return -ENOLINK;
>>>
>>> - width = 720;
>>> - height = afe->curr_norm & V4L2_STD_525_60 ? 480 : 576;
>>> - fps = afe->curr_norm & V4L2_STD_525_60 ? 30 : 25;
>>> -
>>> - return adv748x_csi2_set_pixelrate(tx, width * height * fps);
>>> + /*
>>> + * The ADV748x samples analog video signals using an externally
> supplied
>>> + * clock whose frequency is required to be 28.63636 MHz.
>>> + */
>>> + return adv748x_csi2_set_pixelrate(tx, 28636360);
>>> }
>>>
>>> static int adv748x_afe_enum_mbus_code(struct v4l2_subdev *sd,
>>> diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c
>>> b/drivers/media/i2c/adv748x/adv748x-hdmi.c index
>>> 10d229a4f088..aecc2a84dfec 100644
>>> --- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
>>> +++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
>>> @@ -402,8 +402,6 @@ static int adv748x_hdmi_propagate_pixelrate(struct
>>> adv748x_hdmi *hdmi)>
>>> {
>>> struct v4l2_subdev *tx;
>>> struct v4l2_dv_timings timings;
>>> - struct v4l2_bt_timings *bt = &timings.bt;
>>> - unsigned int fps;
>>>
>>> tx = adv748x_get_remote_sd(&hdmi->pads[ADV748X_HDMI_SOURCE]);
>>> if (!tx)
>>> @@ -411,11 +409,7 @@ static int adv748x_hdmi_propagate_pixelrate(struct
>>> adv748x_hdmi *hdmi)
>>> adv748x_hdmi_query_dv_timings(&hdmi->sd, &timings);
>>>
>>> - fps = DIV_ROUND_CLOSEST_ULL(bt->pixelclock,
>>> - V4L2_DV_BT_FRAME_WIDTH(bt) *
>>> - V4L2_DV_BT_FRAME_HEIGHT(bt));
>>> -
>>> - return adv748x_csi2_set_pixelrate(tx, bt->width * bt->height * fps);
>>> + return adv748x_csi2_set_pixelrate(tx, timings.bt.pixelclock);
>>> }
>>>
>>> static int adv748x_hdmi_enum_mbus_code(struct v4l2_subdev *sd,
>
