Hi Maxime,
Thank you for the patch.
On Monday, 16 April 2018 15:36:50 EEST Maxime Ripard wrote:
> From: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
>
> Add the auto-focus ENABLE/DISABLE feature as V4L2 control.
> Disabled by default.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@xxxxxxxxxxx>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
> ---
> drivers/media/i2c/ov5640.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index 852026baa2e7..a33e45f8e2b0 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -82,8 +82,9 @@
> #define OV5640_REG_POLARITY_CTRL00 0x4740
> #define OV5640_REG_MIPI_CTRL00 0x4800
> #define OV5640_REG_DEBUG_MODE 0x4814
> -#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f
> +#define OV5640_REG_ISP_CTRL03 0x5003
> #define OV5640_REG_PRE_ISP_TEST_SET1 0x503d
> +#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f
> #define OV5640_REG_SDE_CTRL0 0x5580
> #define OV5640_REG_SDE_CTRL1 0x5581
> #define OV5640_REG_SDE_CTRL3 0x5583
> @@ -186,6 +187,7 @@ struct ov5640_ctrls {
> struct v4l2_ctrl *auto_gain;
> struct v4l2_ctrl *gain;
> };
> + struct v4l2_ctrl *auto_focus;
> struct v4l2_ctrl *brightness;
> struct v4l2_ctrl *saturation;
> struct v4l2_ctrl *contrast;
> @@ -2155,6 +2157,12 @@ static int ov5640_set_ctrl_test_pattern(struct
> ov5640_dev *sensor, int value) 0xa4, value ? 0xa4 : 0);
> }
>
> +static int ov5640_set_ctrl_focus(struct ov5640_dev *sensor, int value)
> +{
> + return ov5640_mod_reg(sensor, OV5640_REG_ISP_CTRL03,
> + BIT(1), value ? BIT(1) : 0);
According to the datasheet, bit 1 in register 0x5003 is "Draw window for AFC
enable". The draw window module is further documented as being "used to
display a window on top of live video. It is usually used by autofocus to
display a focus window". Are you sure the bit controls the autofocus itself ?
Furthermore, do all 0V5640 camera modules include a VCM ?
> +}
> +
> static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
> {
> struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
> @@ -2223,6 +2231,9 @@ static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
> case V4L2_CID_TEST_PATTERN:
> ret = ov5640_set_ctrl_test_pattern(sensor, ctrl->val);
> break;
> + case V4L2_CID_FOCUS_AUTO:
> + ret = ov5640_set_ctrl_focus(sensor, ctrl->val);
> + break;
> default:
> ret = -EINVAL;
> break;
> @@ -2285,6 +2296,9 @@ static int ov5640_init_controls(struct ov5640_dev
> *sensor) ARRAY_SIZE(test_pattern_menu) - 1,
> 0, 0, test_pattern_menu);
>
> + ctrls->auto_focus = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_AUTO,
> + 0, 1, 1, 0);
> +
> if (hdl->error) {
> ret = hdl->error;
> goto free_ctrls;
--
Regards,
Laurent Pinchart
