Hi Guennadi, On 11/04/18 17:17, Kieran Bingham wrote: > Hi Guennadi, > > On 11/04/18 10:56, Guennadi Liakhovetski wrote: >> Hi Laurent, >> >> Not sure whether that's a kernel or a user-space problem, but UVC related >> anyway. I've got a UVC 1.5 (!) Logitech camera, that used to work fine >> with earlier kernels. I now installed "media 4.16" and saw, that the >> kernel log was filling with messages like >> >> uvcvideo: Failed to query (GET_MIN) UVC control 2 on unit 1: -32 (exp. 1). >> >> The expected /dev/video[01] nodes were not created correctly, and the >> hard-drive was getting full very quickly. The latter was happening because >> the the /var/log/uvcdynctrl-udev.log file was growing. A truncated sample >> is attached. At its bottom you see messages >> >> [libwebcam] Warning: The driver behind device video0 has a slightly buggy implementation >> of the V4L2_CTRL_FLAG_NEXT_CTRL flag. It does not return the next higher >> control ID if a control query fails. A workaround has been enabled. >> >> repeating, which continues even if the camera is unplugged. The kernel is >> the head of the master branch of git://linuxtv.org/media_tree.git >> >> Just figured out this commit >> >> From: Edgar Thier <info@xxxxxxxxxxxxxx> >> Date: Thu, 12 Oct 2017 03:54:17 -0400 >> Subject: [PATCH] media: uvcvideo: Apply flags from device to actual properties >> >> as the culprit. Without it everything is back to normal. > > I've already investigated and fixed this: > > Please apply: > https://patchwork.kernel.org/patch/10299735/ > > You stated that this is showing up on a v4.16 kernel ... but as far as I'm aware > - this feature shouldn't make it in until v4.17. Are you using linux-next or a > media/master or such ? Aha - never mind - I just re-read your message. I expect the fix to make it into the media mainline when Mauro pulls from Laurent? So I'm sure it will find its way soon. -- Cheers Kieran > > Regards > > Kieran > >> Thanks >> Guennadi >>
