There are old bttv-driven Hauppauge WinTV series cards that have
their IR part at i2c addr 0x71, which doesn't get considered in the
new 2.6.31 i2c code.
>From a 2.6.29 kernel:
lirc_i2c: chip 0x10005 found @ 0x71 (Hauppauge PVR150)
Minor cosmetic glitch, the card in question isn't actually a PVR-150, its:
03:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at f4ffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: bttv
Kernel modules: bttv
Device ID: 0x109e:0x036e, Sub-Device ID: 0x0070:0x13eb
This simply adds 0x71 to the list of addresses i2c_new_probed_device should
consider, which gets IR working on this card again.
Reported-by: Adam Williamson <awilliam@xxxxxxxxxx>
Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
Tested-by: Adam Williamson <awilliam@xxxxxxxxxx>
---
diff -r e0cd9a337600 linux/drivers/media/video/bt8xx/bttv-i2c.c
--- a/linux/drivers/media/video/bt8xx/bttv-i2c.c Sun Nov 29 12:08:02 2009 -0200
+++ b/linux/drivers/media/video/bt8xx/bttv-i2c.c Tue Dec 01 11:23:17 2009 -0500
@@ -423,7 +423,7 @@
That's why we probe 0x1a (~0x34) first. CB
*/
const unsigned short addr_list[] = {
- 0x1a, 0x18, 0x4b, 0x64, 0x30,
+ 0x1a, 0x18, 0x4b, 0x64, 0x30, 0x71,
I2C_CLIENT_END
};
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
