The vsp1_du_setup_lif() function sets up the DRM pipeline input
manually. This duplicates the code from the
vsp1_du_pipeline_setup_input() function. Replace the manual
implementation by a call to the function.
As the pipeline has no enabled input in vsp1_du_setup_lif(), the
vsp1_du_pipeline_setup_input() function will not setup any RPF, and will
thus not setup formats on the BRU sink pads. This isn't a problem as all
inputs are disabled, and the BRU sink pads will be reconfigured from the
atomic commit handler when inputs will be enabled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
--
Changes since v1:
- Fixed spelling in commit message
---
drivers/media/platform/vsp1/vsp1_drm.c | 40 +++++-----------------------------
1 file changed, 6 insertions(+), 34 deletions(-)
diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c
index 6ad8aa6c8138..00ce99bd1605 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -412,47 +412,19 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index,
dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n",
__func__, pipe_index, cfg->width, cfg->height);
- /*
- * Configure the format at the BRU sinks and propagate it through the
- * pipeline.
- */
+ /* Setup formats through the pipeline. */
+ ret = vsp1_du_pipeline_setup_input(vsp1, pipe);
+ if (ret < 0)
+ return ret;
+
memset(&format, 0, sizeof(format));
format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-
- for (i = 0; i < pipe->bru->source_pad; ++i) {
- format.pad = i;
-
- format.format.width = cfg->width;
- format.format.height = cfg->height;
- format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
- format.format.field = V4L2_FIELD_NONE;
-
- ret = v4l2_subdev_call(&pipe->bru->subdev, pad,
- set_fmt, NULL, &format);
- if (ret < 0)
- return ret;
-
- dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
- __func__, format.format.width, format.format.height,
- format.format.code, BRU_NAME(pipe->bru), i);
- }
-
- format.pad = pipe->bru->source_pad;
+ format.pad = RWPF_PAD_SINK;
format.format.width = cfg->width;
format.format.height = cfg->height;
format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
format.format.field = V4L2_FIELD_NONE;
- ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
- &format);
- if (ret < 0)
- return ret;
-
- dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
- __func__, format.format.width, format.format.height,
- format.format.code, BRU_NAME(pipe->bru), i);
-
- format.pad = RWPF_PAD_SINK;
ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, set_fmt, NULL,
&format);
if (ret < 0)
--
Regards,
Laurent Pinchart
