Hi Matt,
Thanks for the patch. It's a very nicely written, small driver. :-)
Please see more comments below.
On Sat, Mar 31, 2018 at 05:59:26PM -0700, Matt Ranostay wrote:
> There are several thermal sensors that only have a low-speed bus
> interface but output valid video data. This patchset enables support
> for the AMG88xx "Grid-Eye" sensor family.
>
> Signed-off-by: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
Are there plans to implement support for more of these chips?
> ---
> MAINTAINERS | 6 +
> drivers/media/i2c/Kconfig | 9 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/video-i2c.c | 562 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 578 insertions(+)
> create mode 100644 drivers/media/i2c/video-i2c.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 49236216a871..f0262b751d5b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14863,6 +14863,12 @@ L: linux-media@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/media/platform/video-mux.c
>
> +VIDEO I2C POLLING DRIVER
> +M: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
> +L: linux-media@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: drivers/media/i2c/video-i2c.c
> +
> VIDEOBUF2 FRAMEWORK
> M: Pawel Osciak <pawel@xxxxxxxxxx>
> M: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 541f0d28afd8..122e5047a01e 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -974,6 +974,15 @@ config VIDEO_M52790
>
> To compile this driver as a module, choose M here: the
> module will be called m52790.
> +
> +config VIDEO_I2C
> + tristate "I2C transport video support"
> + depends on VIDEO_V4L2 && I2C
> + select VIDEOBUF2_VMALLOC
> + ---help---
> + Enable the I2C transport video support which supports the
> + following:
> + * Panasonic AMG88xx Grid-Eye Sensors
You could add the name of the module here if it's compiled as a module.
> endmenu
>
> menu "Sensors used on soc_camera driver"
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index ea34aee1a85a..84cc472238ef 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -96,6 +96,7 @@ obj-$(CONFIG_VIDEO_LM3646) += lm3646.o
> obj-$(CONFIG_VIDEO_SMIAPP_PLL) += smiapp-pll.o
> obj-$(CONFIG_VIDEO_AK881X) += ak881x.o
> obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
> +obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
> obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
> obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
> obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> diff --git a/drivers/media/i2c/video-i2c.c b/drivers/media/i2c/video-i2c.c
> new file mode 100644
> index 000000000000..9fba8a2767c5
> --- /dev/null
> +++ b/drivers/media/i2c/video-i2c.c
> @@ -0,0 +1,562 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * video-i2c.c - Support for I2C transport video devices
> + *
> + * Copyright (C) 2018 Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
> + *
> + * Supported:
> + * - Panasonic AMG88xx Grid-Eye Sensors
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/freezer.h>
> +#include <linux/kthread.h>
> +#include <linux/i2c.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_device.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/videodev2.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <media/videobuf2-vmalloc.h>
> +
> +#define VIDEO_I2C_DRIVER "video-i2c"
> +
> +struct video_i2c_chip;
> +
> +struct video_i2c_buffer {
> + struct vb2_v4l2_buffer vb;
> + struct list_head list;
> +};
> +
> +struct video_i2c_data {
> + struct i2c_client *client;
> + const struct video_i2c_chip *chip;
> + struct mutex lock;
> + spinlock_t slock;
> + unsigned int sequence;
> + struct mutex queue_lock;
> +
> + struct v4l2_device v4l2_dev;
> + struct video_device vdev;
> + struct vb2_queue vb_vidq;
> +
> + struct task_struct *kthread_vid_cap;
> + struct list_head vid_cap_active;
> +};
> +
> +static struct v4l2_fmtdesc amg88xx_format = {
> + .pixelformat = V4L2_PIX_FMT_Y12,
> +};
> +
> +static struct v4l2_frmsize_discrete amg88xx_size = {
> + .width = 8,
> + .height = 8,
> +};
> +
> +struct video_i2c_chip {
> + /* video dimensions */
> + const struct v4l2_fmtdesc *format;
> + const struct v4l2_frmsize_discrete *size;
> +
> + /* max frames per second */
> + unsigned int max_fps;
> +
> + /* pixel buffer size */
> + unsigned int buffer_size;
> +
> + /* pixel size in bits */
> + unsigned int bpp;
> +
> + /* xfer function */
> + int (*xfer)(struct video_i2c_data *data, char *buf);
> +};
> +
> +static int amg88xx_xfer(struct video_i2c_data *data, char *buf)
> +{
> + struct i2c_client *client = data->client;
> + struct i2c_msg msg[2];
> + u8 reg = 0x80;
> + int ret;
> +
> + msg[0].addr = client->addr;
> + msg[0].flags = 0;
> + msg[0].len = 1;
> + msg[0].buf = (char *) ®
> +
> + msg[1].addr = client->addr;
> + msg[1].flags = I2C_M_RD;
> + msg[1].len = data->chip->buffer_size;
> + msg[1].buf = (char *) buf;
No space before "buf" (nor "®" above).
> +
> + ret = i2c_transfer(client->adapter, msg, 2);
> +
> + return (ret == 2) ? 0 : -EIO;
> +}
> +
> +#define AMG88XX 0
> +
> +static const struct video_i2c_chip video_i2c_chip[] = {
> + [AMG88XX] = {
> + .size = &amg88xx_size,
> + .format = &amg88xx_format,
> + .max_fps = 10,
> + .buffer_size = 128,
> + .bpp = 16,
> + .xfer = &amg88xx_xfer,
> + },
> +};
> +
> +static const struct v4l2_file_operations video_i2c_fops = {
> + .owner = THIS_MODULE,
> + .open = v4l2_fh_open,
> + .release = vb2_fop_release,
> + .poll = vb2_fop_poll,
> + .read = vb2_fop_read,
> + .mmap = vb2_fop_mmap,
> + .unlocked_ioctl = video_ioctl2,
> +};
> +
> +static int queue_setup(struct vb2_queue *vq,
> + unsigned int *nbuffers, unsigned int *nplanes,
> + unsigned int sizes[], struct device *alloc_devs[])
> +{
> + struct video_i2c_data *data = vb2_get_drv_priv(vq);
> + unsigned int size = data->chip->buffer_size;
> +
> + if (vq->num_buffers + *nbuffers < 2)
> + *nbuffers = 2;
> +
> + if (*nplanes)
> + return sizes[0] < size ? -EINVAL : 0;
> +
> + *nplanes = 1;
> + sizes[0] = size;
> +
> + return 0;
> +}
> +
> +static int buffer_prepare(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct video_i2c_data *data = vb2_get_drv_priv(vb->vb2_queue);
> + unsigned int size = data->chip->buffer_size;
> +
> + if (vb2_plane_size(vb, 0) < size)
> + return -EINVAL;
> +
> + vbuf->field = V4L2_FIELD_NONE;
> + vb2_set_plane_payload(vb, 0, size);
> +
> + return 0;
> +}
> +
> +static void buffer_queue(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct video_i2c_data *data = vb2_get_drv_priv(vb->vb2_queue);
> + struct video_i2c_buffer *buf =
> + container_of(vbuf, struct video_i2c_buffer, vb);
> +
> + spin_lock(&data->slock);
> + list_add_tail(&buf->list, &data->vid_cap_active);
> + spin_unlock(&data->slock);
> +}
> +
> +static int video_i2c_thread_vid_cap(void *priv)
> +{
> + struct video_i2c_data *data = priv;
> +
> + set_freezable();
> +
> + do {
> + unsigned long start_jiffies = jiffies;
> + unsigned int delay = msecs_to_jiffies(1000 / data->chip->max_fps);
> + struct video_i2c_buffer *vid_cap_buf = NULL;
> + int schedule_delay;
> +
> + try_to_freeze();
> +
> + spin_lock(&data->slock);
> +
> + if (!list_empty(&data->vid_cap_active)) {
> + vid_cap_buf = list_entry(data->vid_cap_active.next,
> + struct video_i2c_buffer, list);
> + list_del(&vid_cap_buf->list);
> + }
> +
> + spin_unlock(&data->slock);
> +
> + if (vid_cap_buf) {
> + struct vb2_buffer *vb2_buf = &vid_cap_buf->vb.vb2_buf;
> + void *vbuf = vb2_plane_vaddr(vb2_buf, 0);
> + int ret = data->chip->xfer(data, vbuf);
> +
> + vb2_buf->timestamp = ktime_get_ns();
> + vid_cap_buf->vb.sequence = data->sequence++;
> + vb2_buffer_done(vb2_buf, ret ?
> + VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> + }
> +
> + schedule_delay = delay - (jiffies - start_jiffies);
> +
> + if (time_after(jiffies, start_jiffies + delay))
> + schedule_delay = delay;
> +
> + schedule_timeout_interruptible(schedule_delay);
> + } while (!kthread_should_stop());
> +
> + return 0;
> +}
> +
> +static int start_streaming(struct vb2_queue *vq, unsigned int count)
> +{
> + struct video_i2c_data *data = vb2_get_drv_priv(vq);
> + struct video_i2c_buffer *buf, *tmp;
> +
> + if (data->kthread_vid_cap)
> + return 0;
> +
> + data->sequence = 0;
> + data->kthread_vid_cap = kthread_run(video_i2c_thread_vid_cap, data,
> + "%s-vid-cap", data->v4l2_dev.name);
> + if (!IS_ERR(data->kthread_vid_cap))
> + return 0;
> +
> + spin_lock(&data->slock);
> +
> + list_for_each_entry_safe(buf, tmp, &data->vid_cap_active, list) {
> + list_del(&buf->list);
> + vb2_buffer_done(&buf->vb.vb2_buf,
> + VB2_BUF_STATE_QUEUED);
What's the purpose of this?
> + }
> +
> + spin_unlock(&data->slock);
> +
> + return PTR_ERR(data->kthread_vid_cap);
How about 0 instead?
> +}
> +
> +static void stop_streaming(struct vb2_queue *vq)
> +{
> + struct video_i2c_data *data = vb2_get_drv_priv(vq);
> +
> + if (data->kthread_vid_cap == NULL)
> + return;
> +
> + kthread_stop(data->kthread_vid_cap);
> +
> + spin_lock(&data->slock);
> +
> + while (!list_empty(&data->vid_cap_active)) {
> + struct video_i2c_buffer *buf;
> +
> + buf = list_entry(data->vid_cap_active.next,
list_last_entry(&data->vid_cap_active, ...)?
> + struct video_i2c_buffer, list);
> + list_del(&buf->list);
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> + }
> + spin_unlock(&data->slock);
> +
> + data->kthread_vid_cap = NULL;
How about moving the assignment right after kthread_stop()? The pointer is
no longer valid after that anyway.
> +}
> +
> +static struct vb2_ops video_i2c_video_qops = {
> + .queue_setup = queue_setup,
> + .buf_prepare = buffer_prepare,
> + .buf_queue = buffer_queue,
> + .start_streaming = start_streaming,
> + .stop_streaming = stop_streaming,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> +};
> +
> +static int video_i2c_querycap(struct file *file, void *priv,
> + struct v4l2_capability *vcap)
> +{
> + struct video_i2c_data *data = video_drvdata(file);
> + struct i2c_client *client = data->client;
> +
> + strlcpy(vcap->driver, data->v4l2_dev.name, sizeof(vcap->driver));
> + sprintf(vcap->card, "I2C %d-%d Transport Video",
> + client->adapter->nr, client->addr);
I wonder if the chip name would be nice here. Up to you.
> +
> + sprintf(vcap->bus_info, "I2C:%d-%d", client->adapter->nr, client->addr);
> + return 0;
> +}
> +
> +static int video_i2c_g_input(struct file *file, void *fh, unsigned int *inp)
> +{
> + *inp = 0;
> +
> + return 0;
> +}
> +
> +static int video_i2c_s_input(struct file *file, void *fh, unsigned int inp)
> +{
> + return (inp > 0) ? -EINVAL : 0;
> +}
> +
> +static int video_i2c_enum_input(struct file *file, void *fh,
> + struct v4l2_input *vin)
> +{
> + if (vin->index > 0)
> + return -EINVAL;
> +
> + strlcpy(vin->name, "Camera", sizeof(vin->name));
> +
> + vin->type = V4L2_INPUT_TYPE_CAMERA;
> +
> + return 0;
> +}
> +
> +static int video_i2c_enum_fmt_vid_cap(struct file *file, void *fh,
> + struct v4l2_fmtdesc *fmt)
> +{
> + struct video_i2c_data *data = video_drvdata(file);
> + enum v4l2_buf_type type = fmt->type;
> +
> + if (fmt->index > 0)
> + return -EINVAL;
> +
> + *fmt = *data->chip->format;
> + fmt->type = type;
> +
> + return 0;
> +}
> +
> +static int video_i2c_enum_framesizes(struct file *file, void *fh,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + const struct video_i2c_data *data = video_drvdata(file);
> + const struct v4l2_frmsize_discrete *size = data->chip->size;
> +
> + /* currently only one frame size is allowed */
> + if (fsize->index > 0)
> + return -EINVAL;
> +
> + if (fsize->pixel_format != data->chip->format->pixelformat)
> + return -EINVAL;
> +
> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> + fsize->discrete.width = size->width;
> + fsize->discrete.height = size->height;
> +
> + return 0;
> +}
> +
> +static int video_i2c_enum_frameintervals(struct file *file, void *priv,
> + struct v4l2_frmivalenum *fe)
> +{
> + const struct video_i2c_data *data = video_drvdata(file);
> + const struct v4l2_frmsize_discrete *size = data->chip->size;
> +
> + if (fe->index > 0)
> + return -EINVAL;
> +
> + if (fe->width != size->width || fe->height != size->height)
> + return -EINVAL;
> +
> + fe->type = V4L2_FRMIVAL_TYPE_DISCRETE;
> + fe->discrete.numerator = 1;
> + fe->discrete.denominator = data->chip->max_fps;
> +
> + return 0;
> +}
> +
> +static int video_i2c_try_fmt_vid_cap(struct file *file, void *fh,
> + struct v4l2_format *fmt)
> +{
> + const struct video_i2c_data *data = video_drvdata(file);
> + const struct v4l2_frmsize_discrete *size = data->chip->size;
> + struct v4l2_pix_format *pix = &fmt->fmt.pix;
> + unsigned int bpp = data->chip->bpp / 8;
> +
> + pix->width = size->width;
> + pix->height = size->height;
> + pix->pixelformat = data->chip->format->pixelformat;
> + pix->field = V4L2_FIELD_NONE;
> + pix->bytesperline = pix->width * bpp;
> + pix->sizeimage = pix->bytesperline * pix->height;
> + pix->colorspace = V4L2_COLORSPACE_RAW;
> +
> + return 0;
> +}
> +
> +static int video_i2c_s_fmt_vid_cap(struct file *file, void *fh,
> + struct v4l2_format *fmt)
> +{
> + struct video_i2c_data *data = video_drvdata(file);
> +
> + if (vb2_is_busy(&data->vb_vidq))
> + return -EBUSY;
> +
> + return video_i2c_try_fmt_vid_cap(file, fh, fmt);
> +}
> +
> +static int video_i2c_g_parm(struct file *filp, void *priv,
> + struct v4l2_streamparm *parm)
> +{
> + struct video_i2c_data *data = video_drvdata(filp);
> +
> + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> + return -EINVAL;
> +
> + parm->parm.capture.readbuffers = 1;
> + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
> + parm->parm.capture.timeperframe.numerator = 1;
> + parm->parm.capture.timeperframe.denominator = data->chip->max_fps;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops video_i2c_ioctl_ops = {
> + .vidioc_querycap = video_i2c_querycap,
> + .vidioc_g_input = video_i2c_g_input,
> + .vidioc_s_input = video_i2c_s_input,
> + .vidioc_enum_input = video_i2c_enum_input,
> + .vidioc_enum_fmt_vid_cap = video_i2c_enum_fmt_vid_cap,
> + .vidioc_enum_framesizes = video_i2c_enum_framesizes,
> + .vidioc_enum_frameintervals = video_i2c_enum_frameintervals,
> + .vidioc_g_fmt_vid_cap = video_i2c_try_fmt_vid_cap,
> + .vidioc_s_fmt_vid_cap = video_i2c_s_fmt_vid_cap,
> + .vidioc_g_parm = video_i2c_g_parm,
> + .vidioc_s_parm = video_i2c_g_parm,
> + .vidioc_try_fmt_vid_cap = video_i2c_try_fmt_vid_cap,
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> +};
> +
> +static void video_i2c_release(struct video_device *vdev)
> +{
> + kfree(video_get_drvdata(vdev));
> +}
> +
> +static int video_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct video_i2c_data *data;
> + struct v4l2_device *v4l2_dev;
> + struct vb2_queue *queue;
> + int chip_id, ret;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + if (client->dev.of_node)
> + chip_id = (long) of_device_get_match_data(&client->dev);
We now have device_get_match_data(). Please use that instead. It's also
safe for NULL:
chip_id = device_get_match_data(&client->dev);
if (!chip_id)
chip_id = id->driver_data;
I wonder if it'd be actually cleaner (and easier to maintain) if you used
pointer to the chip specific struct here instead of giving the chips
special IDs. You could omit the chip IDs altogether.
> + else
> + chip_id = id->driver_data;
Do you need to support the non-OF case? If not, you could switch to
.probe_new callback and omit the I²C ID table.
> +
> + data->chip = &video_i2c_chip[chip_id];
> + data->client = client;
> + v4l2_dev = &data->v4l2_dev;
> + strlcpy(v4l2_dev->name, VIDEO_I2C_DRIVER, sizeof(v4l2_dev->name));
> +
> + ret = v4l2_device_register(&client->dev, v4l2_dev);
> + if (ret < 0)
> + goto error_free_device;
> +
> + mutex_init(&data->lock);
> + mutex_init(&data->queue_lock);
> +
> + queue = &data->vb_vidq;
> + queue->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + queue->io_modes = VB2_DMABUF | VB2_MMAP | VB2_USERPTR | VB2_READ;
> + queue->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + queue->drv_priv = data;
> + queue->buf_struct_size = sizeof(struct video_i2c_buffer);
> + queue->min_buffers_needed = 1;
> + queue->ops = &video_i2c_video_qops;
> + queue->mem_ops = &vb2_vmalloc_memops;
> +
> + ret = vb2_queue_init(queue);
> + if (ret < 0)
> + goto error_unregister_device;
> +
> + data->vdev.queue = queue;
> + data->vdev.queue->lock = &data->queue_lock;
> +
> + snprintf(data->vdev.name, sizeof(data->vdev.name),
> + "I2C %d-%d Transport Video",
> + client->adapter->nr, client->addr);
You could use this string in querycap implementation as it's the same.
> +
> + data->vdev.v4l2_dev = v4l2_dev;
> + data->vdev.fops = &video_i2c_fops;
> + data->vdev.lock = &data->lock;
> + data->vdev.ioctl_ops = &video_i2c_ioctl_ops;
> + data->vdev.release = video_i2c_release;
> + data->vdev.device_caps = V4L2_CAP_VIDEO_CAPTURE |
> + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
> +
> + spin_lock_init(&data->slock);
> + INIT_LIST_HEAD(&data->vid_cap_active);
> +
> + video_set_drvdata(&data->vdev, data);
> + i2c_set_clientdata(client, data);
> +
> + ret = video_register_device(&data->vdev, VFL_TYPE_GRABBER, -1);
> + if (ret < 0)
> + goto error_unregister_device;
> +
> + return 0;
> +
> +error_unregister_device:
> + v4l2_device_unregister(v4l2_dev);
mutex_destroy() for both mutexes. Same in remove below.
> +
> +error_free_device:
> + kfree(data);
> +
> + return ret;
> +}
> +
> +static int video_i2c_remove(struct i2c_client *client)
> +{
> + struct video_i2c_data *data = i2c_get_clientdata(client);
> +
> + video_unregister_device(&data->vdev);
> + v4l2_device_unregister(&data->v4l2_dev);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id video_i2c_id_table[] = {
> + { "amg88xx", AMG88XX },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, video_i2c_id_table);
> +
> +static const struct of_device_id video_i2c_of_match[] = {
> + { .compatible = "panasonic,amg88xx", .data = (void *) AMG88XX },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, video_i2c_of_match);
> +
> +static struct i2c_driver video_i2c_driver = {
> + .driver = {
> + .name = VIDEO_I2C_DRIVER,
> + .of_match_table = of_match_ptr(video_i2c_of_match),
No need to use of_match_ptr macro, a direct assignment will do.
> + },
> + .probe = video_i2c_probe,
> + .remove = video_i2c_remove,
> + .id_table = video_i2c_id_table,
> +};
> +
> +module_i2c_driver(video_i2c_driver);
> +
> +MODULE_AUTHOR("Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("I2C transport video support");
> +MODULE_LICENSE("GPL");
"GPL v2"? Or adjust the SPDX header accordingly.
--
Sakari Ailus
e-mail: sakari.ailus@xxxxxx
