Hi Kieran,
On Thursday, 29 March 2018 14:49:12 EEST Kieran Bingham wrote:
> Hi Laurent,
>
> Thank you for another patch :D
You're welcome, there will be more ;-)
> On 26/02/18 21:45, Laurent Pinchart wrote:
> > In order to make the vsp1_du_setup_lif() easier to read, and for
> > symmetry with the DRM pipeline input setup, move the pipeline output
> > setup code to a separate function.
> >
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> Just an easy code move. And I agree it improves things.
>
> Small question below, but otherwise:
>
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
>
> > ---
> >
> > drivers/media/platform/vsp1/vsp1_drm.c | 107 ++++++++++++++++------------
> > 1 file changed, 61 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> > b/drivers/media/platform/vsp1/vsp1_drm.c index 00ce99bd1605..1c8adda47440
> > 100644
> > --- a/drivers/media/platform/vsp1/vsp1_drm.c
> > +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> > @@ -276,6 +276,66 @@ static int vsp1_du_pipeline_setup_input(struct
> > vsp1_device *vsp1,
> > return 0;
> >
> > }
> >
> > +/* Setup the output side of the pipeline (WPF and LIF). */
> > +static int vsp1_du_pipeline_setup_output(struct vsp1_device *vsp1,
> > + struct vsp1_pipeline *pipe)
> > +{
> > + struct vsp1_drm_pipeline *drm_pipe = to_vsp1_drm_pipeline(pipe);
> > + struct v4l2_subdev_format format = {
> > + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
>
> Why do you initialise this .which here, but all the other member variables
> below.
>
> Wouldn't it make more sense to group all of this initialisation together? or
> is there a distinction in keeping the .which separate.
>
> (Perhaps this is just a way to initialise the rest of the structure to 0,
> without using the memset?)
The initialization of the .which field is indeed there to avoid the memset,
but other than that there's no particular reason. I find it clearer to keep
the initialization of the structure close to the code that makes use of it
(the next v4l2_subdev_call in this case).
As initializing all members when declaring the variable doesn't make a change
in code size (gcc 6.4.0) but increases .rodata by 18 bytes and decreases
__modver by the same amount, I'm tempted to leave it as-is unless you think it
should be changed.
> > + };
> > + int ret;
> > +
> > + format.pad = RWPF_PAD_SINK;
> > + format.format.width = drm_pipe->width;
> > + format.format.height = drm_pipe->height;
> > + format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
> > + format.format.field = V4L2_FIELD_NONE;
> > +
> > + ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, set_fmt,
NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on WPF%u sink\n",
> > + __func__, format.format.width, format.format.height,
> > + format.format.code, pipe->output->entity.index);
> > +
> > + format.pad = RWPF_PAD_SOURCE;
> > + ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, get_fmt,
NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev, "%s: got format %ux%u (%x) on WPF%u source\n",
> > + __func__, format.format.width, format.format.height,
> > + format.format.code, pipe->output->entity.index);
> > +
> > + format.pad = LIF_PAD_SINK;
> > + ret = v4l2_subdev_call(&pipe->lif->subdev, pad, set_fmt, NULL,
> > + &format);
> > + if (ret < 0)
> > + return ret;
> > +
> > + dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on LIF%u sink\n",
> > + __func__, format.format.width, format.format.height,
> > + format.format.code, pipe->lif->index);
> > +
> > + /*
> > + * Verify that the format at the output of the pipeline matches the
> > + * requested frame size and media bus code.
> > + */
> > + if (format.format.width != drm_pipe->width ||
> > + format.format.height != drm_pipe->height ||
> > + format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
> > + dev_dbg(vsp1->dev, "%s: format mismatch on LIF%u\n", __func__,
> > + pipe->lif->index);
> > + return -EPIPE;
> > + }
> > +
> > + return 0;
> > +}
> > +
> >
> > /* Configure all entities in the pipeline. */
> > static void vsp1_du_pipeline_configure(struct vsp1_pipeline *pipe)
> > {
> >
> > @@ -356,7 +416,6 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int
> > pipe_index,>
> > struct vsp1_drm_pipeline *drm_pipe;
> > struct vsp1_pipeline *pipe;
> > struct vsp1_bru *bru;
> >
> > - struct v4l2_subdev_format format;
> >
> > unsigned long flags;
> > unsigned int i;
> > int ret;
> >
> > @@ -417,54 +476,10 @@ int vsp1_du_setup_lif(struct device *dev, unsigned
> > int pipe_index,>
> > if (ret < 0)
> >
> > return ret;
> >
> > - memset(&format, 0, sizeof(format));
> > - format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > - format.pad = RWPF_PAD_SINK;
> > - format.format.width = cfg->width;
> > - format.format.height = cfg->height;
> > - format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
> > - format.format.field = V4L2_FIELD_NONE;
> > -
> > - ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, set_fmt,
NULL,
> > - &format);
> > + ret = vsp1_du_pipeline_setup_output(vsp1, pipe);
> >
> > if (ret < 0)
> >
> > return ret;
> >
> > - dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on WPF%u sink\n",
> > - __func__, format.format.width, format.format.height,
> > - format.format.code, pipe->output->entity.index);
> > -
> > - format.pad = RWPF_PAD_SOURCE;
> > - ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, get_fmt,
NULL,
> > - &format);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev, "%s: got format %ux%u (%x) on WPF%u source\n",
> > - __func__, format.format.width, format.format.height,
> > - format.format.code, pipe->output->entity.index);
> > -
> > - format.pad = LIF_PAD_SINK;
> > - ret = v4l2_subdev_call(&pipe->lif->subdev, pad, set_fmt, NULL,
> > - &format);
> > - if (ret < 0)
> > - return ret;
> > -
> > - dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on LIF%u sink\n",
> > - __func__, format.format.width, format.format.height,
> > - format.format.code, pipe_index);
> > -
> > - /*
> > - * Verify that the format at the output of the pipeline matches the
> > - * requested frame size and media bus code.
> > - */
> > - if (format.format.width != cfg->width ||
> > - format.format.height != cfg->height ||
> > - format.format.code != MEDIA_BUS_FMT_ARGB8888_1X32) {
> > - dev_dbg(vsp1->dev, "%s: format mismatch\n", __func__);
> > - return -EPIPE;
> > - }
> > -
> >
> > /* Enable the VSP1. */
> > ret = vsp1_device_get(vsp1);
> > if (ret < 0)
--
Regards,
Laurent Pinchart
