On Tue, Mar 27, 2018 at 02:59:21AM +0430, Nasser wrote:
Hi Mauro,
Thank you for taking time to review my patch.
May be I should rephrase the commit message to something like:
Use the default register values as suggested in TVP5150AM1 datasheet
As this is not a hardware-dependent issue. Am I missing something?
> On Mon, Mar 26, 2018 at 06:43:53AM -0300, Mauro Carvalho Chehab wrote:
> > Hi Nasser,
> >
> > Em Mon, 26 Mar 2018 03:26:33 +0430
> > Nasser Afshin <afshin.nasser@xxxxxxxxx> escreveu:
> >
> > > According to the datasheet, INTREQ/GPCL/VBLK should have a pull-up/down
> > > resistor if it's been disabled. On hardware that does not have such
> > > resistor, we should use the default output enable value.
> > > This prevents the color burst lock instability problem.
> >
>
> Color burst lock instability is just a side effect of not using the
> recommended value for this bit. If we use the recommended setting, we
> will support more hardware while not breaking anything.
>
> > If this is hardware-dependent, you should instead store it at
> > OF (for SoC) or pass via platform_data (for PCI/USB devices).
> >
>
> We have used the recommended value for this bit (as the datasheet
> suggests) while we are in tvp5150_init_enable but in tvp5150_s_stream
> we are using the wrong value.
>
> Also we have this comment at line 319:
> /* Default values as sugested at TVP5150AM1 datasheet */
> But as you see, TVP5150_MISC_CTL is not set to its suggested default
> value.
>
> > >
> > > Signed-off-by: Nasser Afshin <Afshin.Nasser@xxxxxxxxx>
> > > ---
> > > drivers/media/i2c/tvp5150.c | 5 +++--
> > > 1 file changed, 3 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> > > index 2476d812f669..0e9713814816 100644
> > > --- a/drivers/media/i2c/tvp5150.c
> > > +++ b/drivers/media/i2c/tvp5150.c
> > > @@ -328,7 +328,7 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
> > > TVP5150_OP_MODE_CTL,0x00
> > > },
> > > { /* 0x03 */
> > > - TVP5150_MISC_CTL,0x01
> > > + TVP5150_MISC_CTL,0x21
> > > },
> > > { /* 0x06 */
> > > TVP5150_COLOR_KIL_THSH_CTL,0x10
> > > @@ -1072,7 +1072,8 @@ static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
> > > * Enable the YCbCr and clock outputs. In discrete sync mode
> > > * (non-BT.656) additionally enable the the sync outputs.
> > > */
> > > - val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
> > > + val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE |
> > > + TVP5150_MISC_CTL_INTREQ_OE;
> > > if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
> > > val |= TVP5150_MISC_CTL_SYNC_OE;
> > > }
> >
> >
> >
> > Thanks,
> > Mauro
Thanks,
Nasser
