Hi Hans, On 19/03/2018 12:43, Hans Verkuil wrote: > From: Hans Verkuil <hans.verkuil@xxxxxxxxx> > > Some boards (amlogic) have two CEC controllers: the DesignWare controller > and their own CEC controller (meson ao-cec). > > Since the CEC line is not hooked up to the DW controller we need a way > to disable that controller. This patch series adds the cec-disable > property for that purpose. > > Neil, I have added cec-disable to meson-gxl-s905x-libretech-cc.dts > only, but I suspect it is probably valid for all meson-glx devices? > Should I move it to meson-gxl.dtsi? It's valid on all GX devices, so you can add to meson-gx.dtsi Neil > > Regards, > > Hans > > Hans Verkuil (3): > dt-bindings: display: dw_hdmi.txt > drm: bridge: dw-hdmi: check the cec-disable property > arm64: dts: meson-gxl-s905x-libretech-cc: add cec-disable > > Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt | 3 +++ > arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 1 + > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 ++- > 3 files changed, 6 insertions(+), 1 deletion(-) >
