Use regmap for chip register access.
Signed-off-by: Antti Palosaari <crope@xxxxxx>
---
drivers/media/usb/dvb-usb-v2/Kconfig | 1 +
drivers/media/usb/dvb-usb-v2/af9015.c | 209 ++++++++++++++++++----------------
drivers/media/usb/dvb-usb-v2/af9015.h | 2 +
3 files changed, 115 insertions(+), 97 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index 0e4944b2b0f4..09a52aae299a 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -16,6 +16,7 @@ config DVB_USB_V2
config DVB_USB_AF9015
tristate "Afatech AF9015 DVB-T USB2.0 support"
depends on DVB_USB_V2
+ select REGMAP
select DVB_AF9013
select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
diff --git a/drivers/media/usb/dvb-usb-v2/af9015.c b/drivers/media/usb/dvb-usb-v2/af9015.c
index 99e3b14d493e..8379ef164fad 100644
--- a/drivers/media/usb/dvb-usb-v2/af9015.c
+++ b/drivers/media/usb/dvb-usb-v2/af9015.c
@@ -117,31 +117,6 @@ static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
return ret;
}
-static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val,
- u8 len)
-{
- struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
- val};
- return af9015_ctrl_msg(d, &req);
-}
-
-static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len)
-{
- struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
- val};
- return af9015_ctrl_msg(d, &req);
-}
-
-static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
-{
- return af9015_write_regs(d, addr, &val, 1);
-}
-
-static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
-{
- return af9015_read_regs(d, addr, val, 1);
-}
-
static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
u8 val)
{
@@ -168,38 +143,6 @@ static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
return af9015_ctrl_msg(d, &req);
}
-static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
-{
- int ret;
- u8 val, mask = 0x01;
-
- ret = af9015_read_reg(d, addr, &val);
- if (ret)
- return ret;
-
- mask <<= bit;
- if (op) {
- /* set bit */
- val |= mask;
- } else {
- /* clear bit */
- mask ^= 0xff;
- val &= mask;
- }
-
- return af9015_write_reg(d, addr, val);
-}
-
-static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
-{
- return af9015_do_reg_bit(d, addr, bit, 1);
-}
-
-static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
-{
- return af9015_do_reg_bit(d, addr, bit, 0);
-}
-
static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
@@ -642,76 +585,73 @@ static int af9015_streaming_ctrl(struct dvb_frontend *fe, int onoff)
reg1 = 0xdd8a;
reg2 = 0xdd0d;
}
-
- ret = af9015_write_regs(d, reg1, buf, 2);
+ ret = regmap_bulk_write(state->regmap, reg1, buf, 2);
if (ret)
goto err;
- ret = af9015_write_reg(d, reg2, utmp2);
+ ret = regmap_write(state->regmap, reg2, utmp2);
if (ret)
goto err;
/* TS IF settings */
if (state->dual_mode) {
- ret = af9015_set_reg_bit(d, 0xd50b, 0);
- if (ret)
- goto err;
- ret = af9015_set_reg_bit(d, 0xd520, 4);
- if (ret)
- goto err;
+ utmp1 = 0x01;
+ utmp2 = 0x10;
} else {
- ret = af9015_clear_reg_bit(d, 0xd50b, 0);
- if (ret)
- goto err;
- ret = af9015_clear_reg_bit(d, 0xd520, 4);
- if (ret)
- goto err;
+ utmp1 = 0x00;
+ utmp2 = 0x00;
}
+ ret = regmap_update_bits(state->regmap, 0xd50b, 0x01, utmp1);
+ if (ret)
+ goto err;
+ ret = regmap_update_bits(state->regmap, 0xd520, 0x10, utmp2);
+ if (ret)
+ goto err;
state->usb_ts_if_configured[adap_id] = true;
}
if (adap_id == 0 && onoff) {
/* Adapter 0 stream on. EP4: clear NAK, enable, clear reset */
- ret = af9015_clear_reg_bit(d, 0xdd13, 5);
+ ret = regmap_update_bits(state->regmap, 0xdd13, 0x20, 0x00);
if (ret)
goto err;
- ret = af9015_set_reg_bit(d, 0xdd11, 5);
+ ret = regmap_update_bits(state->regmap, 0xdd11, 0x20, 0x20);
if (ret)
goto err;
- ret = af9015_clear_reg_bit(d, 0xd507, 2);
+ ret = regmap_update_bits(state->regmap, 0xd507, 0x04, 0x00);
if (ret)
goto err;
} else if (adap_id == 1 && onoff) {
/* Adapter 1 stream on. EP5: clear NAK, enable, clear reset */
- ret = af9015_clear_reg_bit(d, 0xdd13, 6);
+ ret = regmap_update_bits(state->regmap, 0xdd13, 0x40, 0x00);
if (ret)
goto err;
- ret = af9015_set_reg_bit(d, 0xdd11, 6);
+ ret = regmap_update_bits(state->regmap, 0xdd11, 0x40, 0x40);
if (ret)
goto err;
- ret = af9015_clear_reg_bit(d, 0xd50b, 1);
+ ret = regmap_update_bits(state->regmap, 0xd50b, 0x02, 0x00);
if (ret)
goto err;
} else if (adap_id == 0 && !onoff) {
/* Adapter 0 stream off. EP4: set reset, disable, set NAK */
- ret = af9015_set_reg_bit(d, 0xd507, 2);
+ ret = regmap_update_bits(state->regmap, 0xd507, 0x04, 0x04);
if (ret)
goto err;
- ret = af9015_clear_reg_bit(d, 0xdd11, 5);
+ ret = regmap_update_bits(state->regmap, 0xdd11, 0x20, 0x00);
if (ret)
goto err;
- ret = af9015_set_reg_bit(d, 0xdd13, 5);
+ ret = regmap_update_bits(state->regmap, 0xdd13, 0x20, 0x20);
if (ret)
goto err;
} else if (adap_id == 1 && !onoff) {
/* Adapter 1 stream off. EP5: set reset, disable, set NAK */
- ret = af9015_set_reg_bit(d, 0xd50b, 1);
+ ret = regmap_update_bits(state->regmap, 0xd50b, 0x02, 0x02);
if (ret)
goto err;
- ret = af9015_clear_reg_bit(d, 0xdd11, 6);
+ ret = regmap_update_bits(state->regmap, 0xdd11, 0x40, 0x00);
if (ret)
goto err;
- ret = af9015_set_reg_bit(d, 0xdd13, 6);
+ ret = regmap_update_bits(state->regmap, 0xdd13, 0x40, 0x40);
if (ret)
goto err;
}
@@ -852,7 +792,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
return 0;
/* Set i2c clock to 625kHz to speed up firmware copy */
- ret = af9015_write_reg(d, 0xd416, 0x04);
+ ret = regmap_write(state->regmap, 0xd416, 0x04);
if (ret)
goto err;
@@ -864,7 +804,7 @@ static int af9015_copy_firmware(struct dvb_usb_device *d)
}
/* Set i2c clock to 125kHz */
- ret = af9015_write_reg(d, 0xd416, 0x14);
+ ret = regmap_write(state->regmap, 0xd416, 0x14);
if (ret)
goto err;
@@ -1182,7 +1122,7 @@ static int af9015_init(struct dvb_usb_device *d)
mutex_init(&state->fe_mutex);
/* init RC canary */
- ret = af9015_write_reg(d, 0x98e9, 0xff);
+ ret = regmap_write(state->regmap, 0x98e9, 0xff);
if (ret)
goto error;
@@ -1230,7 +1170,7 @@ static int af9015_rc_query(struct dvb_usb_device *d)
u8 buf[17];
/* read registers needed to detect remote controller code */
- ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
+ ret = regmap_bulk_read(state->regmap, 0x98d9, buf, sizeof(buf));
if (ret)
goto error;
@@ -1255,7 +1195,7 @@ static int af9015_rc_query(struct dvb_usb_device *d)
dev_dbg(&intf->dev, "key pressed %*ph\n", 4, buf + 12);
/* Reset the canary */
- ret = af9015_write_reg(d, 0x98e9, 0xff);
+ ret = regmap_write(state->regmap, 0x98e9, 0xff);
if (ret)
goto error;
@@ -1359,15 +1299,68 @@ static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
#define af9015_get_rc_config NULL
#endif
-static int af9015_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+static int af9015_regmap_write(void *context, const void *data, size_t count)
+{
+ struct dvb_usb_device *d = context;
+ struct usb_interface *intf = d->intf;
+ int ret;
+ u16 reg = ((u8 *)data)[0] << 8 | ((u8 *)data)[1] << 0;
+ u8 *val = &((u8 *)data)[2];
+ const unsigned int len = count - 2;
+ struct req_t req = {WRITE_MEMORY, 0, reg, 0, 0, len, val};
+
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ dev_dbg(&intf->dev, "failed %d\n", ret);
+ return ret;
+}
+
+static int af9015_regmap_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf, size_t val_size)
+{
+ struct dvb_usb_device *d = context;
+ struct usb_interface *intf = d->intf;
+ int ret;
+ u16 reg = ((u8 *)reg_buf)[0] << 8 | ((u8 *)reg_buf)[1] << 0;
+ u8 *val = &((u8 *)val_buf)[0];
+ const unsigned int len = val_size;
+ struct req_t req = {READ_MEMORY, 0, reg, 0, 0, len, val};
+
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ dev_dbg(&intf->dev, "failed %d\n", ret);
+ return ret;
+}
+
+static int af9015_probe(struct dvb_usb_device *d)
{
+ struct af9015_state *state = d_to_priv(d);
+ struct usb_interface *intf = d->intf;
struct usb_device *udev = interface_to_usbdev(intf);
+ int ret;
char manufacturer[sizeof("ITE Technologies, Inc.")];
+ static const struct regmap_config regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ };
+ static const struct regmap_bus regmap_bus = {
+ .read = af9015_regmap_read,
+ .write = af9015_regmap_write,
+ };
+
+ dev_dbg(&intf->dev, "\n");
memset(manufacturer, 0, sizeof(manufacturer));
usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
+ manufacturer, sizeof(manufacturer));
/*
* There is two devices having same ID but different chipset. One uses
* AF9015 and the other IT9135 chipset. Only difference seen on lsusb
@@ -1386,19 +1379,39 @@ static int af9015_probe(struct usb_interface *intf,
* iProduct 2 DVB-T TV Stick
*/
if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) &&
- (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
+ (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
if (!strcmp("ITE Technologies, Inc.", manufacturer)) {
+ ret = -ENODEV;
dev_dbg(&intf->dev, "rejecting device\n");
- return -ENODEV;
+ goto err;
}
}
- return dvb_usbv2_probe(intf, id);
+ state->regmap = regmap_init(&intf->dev, ®map_bus, d, ®map_config);
+ if (IS_ERR(state->regmap)) {
+ ret = PTR_ERR(state->regmap);
+ goto err;
+ }
+
+ return 0;
+err:
+ dev_dbg(&intf->dev, "failed %d\n", ret);
+ return ret;
+}
+
+static void af9015_disconnect(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d_to_priv(d);
+ struct usb_interface *intf = d->intf;
+
+ dev_dbg(&intf->dev, "\n");
+
+ regmap_exit(state->regmap);
}
/* interface 0 is used by DVB-T receiver and
interface 1 is for remote controller (HID) */
-static struct dvb_usb_device_properties af9015_props = {
+static const struct dvb_usb_device_properties af9015_props = {
.driver_name = KBUILD_MODNAME,
.owner = THIS_MODULE,
.adapter_nr = adapter_nr,
@@ -1407,6 +1420,8 @@ static struct dvb_usb_device_properties af9015_props = {
.generic_bulk_ctrl_endpoint = 0x02,
.generic_bulk_ctrl_endpoint_response = 0x81,
+ .probe = af9015_probe,
+ .disconnect = af9015_disconnect,
.identify_state = af9015_identify_state,
.firmware = AF9015_FIRMWARE,
.download_firmware = af9015_download_firmware,
@@ -1529,7 +1544,7 @@ MODULE_DEVICE_TABLE(usb, af9015_id_table);
static struct usb_driver af9015_usb_driver = {
.name = KBUILD_MODNAME,
.id_table = af9015_id_table,
- .probe = af9015_probe,
+ .probe = dvb_usbv2_probe,
.disconnect = dvb_usbv2_disconnect,
.suspend = dvb_usbv2_suspend,
.resume = dvb_usbv2_resume,
diff --git a/drivers/media/usb/dvb-usb-v2/af9015.h b/drivers/media/usb/dvb-usb-v2/af9015.h
index 28710aaf058a..ad2b045cc39c 100644
--- a/drivers/media/usb/dvb-usb-v2/af9015.h
+++ b/drivers/media/usb/dvb-usb-v2/af9015.h
@@ -21,6 +21,7 @@
#define AF9015_H
#include <linux/hash.h>
+#include <linux/regmap.h>
#include "dvb_usb.h"
#include "af9013.h"
#include "dvb-pll.h"
@@ -100,6 +101,7 @@ enum af9015_ir_mode {
#define BUF_LEN 63
struct af9015_state {
+ struct regmap *regmap;
u8 buf[BUF_LEN]; /* bulk USB control message */
u8 ir_mode;
u8 rc_repeat;
--
2.14.3
