Hi Laurent,
Thanks for your comments.
On 2018-03-02 12:48:55 +0200, Laurent Pinchart wrote:
> Hi Niklas,
>
> Thank you for the patch.
>
> On Friday, 2 March 2018 03:57:31 EET Niklas Söderlund wrote:
> > There was never proper support in the VIN driver to deliver ALTERNATING
> > field format to user-space, remove this field option. The problem is
> > that ALTERNATING filed order requires the sequence numbers of buffers
>
> s/filed/field/
>
> > returned to userspace to reflect if fields where dropped or not,
> > something which is not possible with the VIN drivers capture logic.
> >
> > The VIN driver can still capture from a video source which delivers
> > frames in ALTERNATING field order, but needs to combine them using the
> > VIN hardware into INTERLACED field order. Before this change if a source
> > was delivering fields using ALTERNATE the driver would default to
> > combining them using this hardware feature. Only if the user explicitly
> > requested ALTERNATE filed order would incorrect frames be delivered.
> >
> > The height should not be cut in half for the format for TOP or BOTTOM
> > fields settings. This was a mistake and it was made visible by the
> > scaling refactoring. Correct behavior is that the user should request a
> > frame size that fits the half height frame reflected in the field
> > setting. If not the VIN will do its best to scale the top or bottom to
> > the requested format and cropping and scaling do not work as expected.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > ---
> > drivers/media/platform/rcar-vin/rcar-dma.c | 15 +----------
> > drivers/media/platform/rcar-vin/rcar-v4l2.c | 40 +++++++-------------------
> > 2 files changed, 10 insertions(+), 45 deletions(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
> > b/drivers/media/platform/rcar-vin/rcar-dma.c index
> > fd14be20a6604d7a..c8831e189d362c8b 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> > @@ -617,7 +617,6 @@ static int rvin_setup(struct rvin_dev *vin)
> > case V4L2_FIELD_INTERLACED_BT:
> > vnmc = VNMC_IM_FULL | VNMC_FOC;
> > break;
> > - case V4L2_FIELD_ALTERNATE:
>
> Just to make sure I understand things correctly, field will never be
> V4L2_FIELD_ALTERNATE after this patch, right ?
That is the intention, but as you noticed bellow it's not perfect until
4 patches later in the series, see bellow.
>
> > case V4L2_FIELD_NONE:
> > if (vin->continuous) {
> > vnmc = VNMC_IM_ODD_EVEN;
> > @@ -757,18 +756,6 @@ static int rvin_get_active_slot(struct rvin_dev *vin,
> > u32 vnms) return 0;
> > }
> >
> > -static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32
> > vnms)
> > -{
> > - if (vin->format.field == V4L2_FIELD_ALTERNATE) {
> > - /* If FS is set it's a Even field */
> > - if (vnms & VNMS_FS)
> > - return V4L2_FIELD_BOTTOM;
> > - return V4L2_FIELD_TOP;
> > - }
> > -
> > - return vin->format.field;
> > -}
> > -
> > static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t
> > addr) {
> > const struct rvin_video_format *fmt;
> > @@ -941,7 +928,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
> > goto done;
> >
> > /* Capture frame */
> > - vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
> > + vin->queue_buf[slot]->field = vin->format.field;
> > vin->queue_buf[slot]->sequence = sequence;
> > vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
> > vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
> > diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> > b/drivers/media/platform/rcar-vin/rcar-v4l2.c index
> > ebcd78b1bb6e8cb6..cef9070884d93ba6 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> > @@ -121,33 +121,6 @@ static int rvin_reset_format(struct rvin_dev *vin)
> > vin->format.colorspace = mf->colorspace;
> > vin->format.field = mf->field;
> >
> > - /*
> > - * If the subdevice uses ALTERNATE field mode and G_STD is
> > - * implemented use the VIN HW to combine the two fields to
> > - * one INTERLACED frame. The ALTERNATE field mode can still
> > - * be requested in S_FMT and be respected, this is just the
> > - * default which is applied at probing or when S_STD is called.
> > - */
> > - if (vin->format.field == V4L2_FIELD_ALTERNATE &&
> > - v4l2_subdev_has_op(vin_to_source(vin), video, g_std))
> > - vin->format.field = V4L2_FIELD_INTERLACED;
> > -
> > - switch (vin->format.field) {
> > - case V4L2_FIELD_TOP:
> > - case V4L2_FIELD_BOTTOM:
> > - case V4L2_FIELD_ALTERNATE:
> > - vin->format.height /= 2;
> > - break;
> > - case V4L2_FIELD_NONE:
> > - case V4L2_FIELD_INTERLACED_TB:
> > - case V4L2_FIELD_INTERLACED_BT:
> > - case V4L2_FIELD_INTERLACED:
> > - break;
> > - default:
> > - vin->format.field = RVIN_DEFAULT_FIELD;
> > - break;
> > - }
> > -
>
> I might be wrong, but if this function is called from S_STD or S_DV_TIMINGS
> and userspace calls G_FMT immediately after that, won't it get
> V4L2_FIELD_ALTERNATE (assuming that's what the sensor produces of course) ?
Yes you are correct, this is 'fixed' in 'rcar-vin: read subdevice format
for crop only when needed' where the format alignment rework is
completed.
I could add a specific hack which is removed 4 patches later or we can
we live with this problem until that time. Normally I would not hesitate
to fix this here, but since ALTERNATE is already broken before the
rework I wonder if the effort really is worth it. What would you
recommend?
None the less I'm impressed you found this, I wish to one day posses
your review skill!
>
> > rvin_reset_crop_compose(vin);
> >
> > vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
> > @@ -233,15 +206,20 @@ static int __rvin_try_format(struct rvin_dev *vin,
> > switch (pix->field) {
> > case V4L2_FIELD_TOP:
> > case V4L2_FIELD_BOTTOM:
> > - case V4L2_FIELD_ALTERNATE:
> > - pix->height /= 2;
> > - source->height /= 2;
> > - break;
> > case V4L2_FIELD_NONE:
> > case V4L2_FIELD_INTERLACED_TB:
> > case V4L2_FIELD_INTERLACED_BT:
> > case V4L2_FIELD_INTERLACED:
> > break;
> > + case V4L2_FIELD_ALTERNATE:
> > + /*
> > + * Driver do not (yet) support outputting ALTERNATE to a
>
> While at it, s/do/does/
>
> > + * userspace. It does support outputting INTERLACED so use
> > + * the VIN hardware to combine the two fields.
> > + */
> > + pix->field = V4L2_FIELD_INTERLACED;
> > + pix->height *= 2;
> > + break;
> > default:
> > pix->field = RVIN_DEFAULT_FIELD;
> > break;
>
> --
> Regards,
>
> Laurent Pinchart
>
--
Regards,
Niklas Söderlund
