Add driver and bindings for the OV2680 2 megapixel CMOS 1/5" sensor, which has
a single MIPI lane interface and output format of 10-bit Raw RGB.
Features supported are described in PATCH 2/2.
v1->v2:
Fabio Estevam:
- s/OV5640/OV2680 in PATCH 1/2 changelog
Sakari Ailus:
- add description on endpoint properties in bindings
- add single endpoint in bindings
- drop OF dependency
- cleanup includes
- fix case in Color Bars
- remove frame rate selection
- 8/16/24 bit register access in the same transaction
- merge _reset and _soft_reset to _enable and rename it to power_on
- _gain_set use only the gain value (drop & 0x7ff)
- _gain_get remove the (0x377)
- single write/read at _exposure_set/get use write_reg24/read_reg24
- move mode_set_direct to _mode_set
- _mode_set set auto exposure/gain based on ctrl value
- s_frame_interval equal to g_frame_interval
- use closest match from: v4l: common: Add a function to obtain best size from a list
- check v4l2_ctrl_new_std return in _init
- fix gain manual value in auto_cluster
Cheers,
Rui
Rui Miguel Silva (2):
media: ov2680: dt: Add bindings for OV2680
media: ov2680: Add Omnivision OV2680 sensor driver
.../devicetree/bindings/media/i2c/ov2680.txt | 40 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov2680.c | 1094 ++++++++++++++++++++
4 files changed, 1147 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt
create mode 100644 drivers/media/i2c/ov2680.c
--
2.16.2
