Hi Mauro,
thanks for doing this.
I didn't dare to touch this driver style issues as it was mainline
already, but since you addressed this I now would have more changes to
apply...
On Mon, Feb 26, 2018 at 09:28:08AM -0500, Mauro Carvalho Chehab wrote:
> As we're adding this as a new driver, make checkpatch happier by
> solving several style issues, using --fix-inplace at strict mode.
>
> Some issues required manual work.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/tw9910.c | 32 ++++++++++++++++----------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
[snip]
>
> if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
> @@ -532,16 +533,16 @@ static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
> }
> if (!ret)
> ret = i2c_smbus_write_byte_data(client, CROP_HI,
> - ((vdelay >> 2) & 0xc0) |
> + ((vdelay >> 2) & 0xc0) |
> ((vact >> 4) & 0x30) |
> ((hdelay >> 6) & 0x0c) |
> ((hact >> 8) & 0x03));
If you move the first line, all the following ones should be be moved
too.
I can send a few patches more on top of this two, to address this and
a few other style issues on this driver.
Would this work for you?
Thanks
j
> if (!ret)
> ret = i2c_smbus_write_byte_data(client, VDELAY_LO,
> - vdelay & 0xff);
> + vdelay & 0xff);
> if (!ret)
> ret = i2c_smbus_write_byte_data(client, VACTIVE_LO,
> - vact & 0xff);
> + vact & 0xff);
>
> return ret;
> }
> @@ -731,7 +732,7 @@ static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
> }
>
> static int tw9910_get_selection(struct v4l2_subdev *sd,
> - struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_selection *sel)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> @@ -756,7 +757,7 @@ static int tw9910_get_selection(struct v4l2_subdev *sd,
> }
>
> static int tw9910_get_fmt(struct v4l2_subdev *sd,
> - struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_format *format)
> {
> struct v4l2_mbus_framefmt *mf = &format->format;
> @@ -807,7 +808,7 @@ static int tw9910_s_fmt(struct v4l2_subdev *sd,
> }
>
> static int tw9910_set_fmt(struct v4l2_subdev *sd,
> - struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_format *format)
> {
> struct v4l2_mbus_framefmt *mf = &format->format;
> @@ -818,9 +819,9 @@ static int tw9910_set_fmt(struct v4l2_subdev *sd,
> if (format->pad)
> return -EINVAL;
>
> - if (V4L2_FIELD_ANY == mf->field) {
> + if (mf->field == V4L2_FIELD_ANY) {
> mf->field = V4L2_FIELD_INTERLACED_BT;
> - } else if (V4L2_FIELD_INTERLACED_BT != mf->field) {
> + } else if (mf->field != V4L2_FIELD_INTERLACED_BT) {
> dev_err(&client->dev, "Field type %d invalid.\n", mf->field);
> return -EINVAL;
> }
> @@ -870,8 +871,7 @@ static int tw9910_video_probe(struct i2c_client *client)
> priv->revision = GET_REV(id);
> id = GET_ID(id);
>
> - if (0x0B != id ||
> - 0x01 < priv->revision) {
> + if (id != 0x0b || priv->revision > 0x01) {
> dev_err(&client->dev,
> "Product ID error %x:%x\n",
> id, priv->revision);
> @@ -899,7 +899,7 @@ static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
> };
>
> static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
> - struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> if (code->pad || code->index)
> --
> 2.14.3
>
