Using bulk clk functions simplifies the driver's code. Use devm_clk_bulk functions instead of iterating over an array of clks. Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx> --- drivers/media/platform/exynos-gsc/gsc-core.c | 55 ++++++++++------------------ drivers/media/platform/exynos-gsc/gsc-core.h | 2 +- 2 files changed, 20 insertions(+), 37 deletions(-) diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index 17854a3..fa7e993 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -1149,7 +1149,6 @@ static int gsc_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; const struct gsc_driverdata *drv_data = of_device_get_match_data(dev); int ret; - int i; gsc = devm_kzalloc(dev, sizeof(struct gsc_dev), GFP_KERNEL); if (!gsc) @@ -1187,25 +1186,19 @@ static int gsc_probe(struct platform_device *pdev) return -ENXIO; } - for (i = 0; i < gsc->num_clocks; i++) { - gsc->clock[i] = devm_clk_get(dev, drv_data->clk_names[i]); - if (IS_ERR(gsc->clock[i])) { - dev_err(dev, "failed to get clock: %s\n", - drv_data->clk_names[i]); - return PTR_ERR(gsc->clock[i]); - } - } + gsc->clocks = devm_clk_bulk_alloc(dev, gsc->num_clocks, + drv_data->clk_names); + if (IS_ERR(gsc->clocks)) + return PTR_ERR(gsc->clocks); - for (i = 0; i < gsc->num_clocks; i++) { - ret = clk_prepare_enable(gsc->clock[i]); - if (ret) { - dev_err(dev, "clock prepare failed for clock: %s\n", - drv_data->clk_names[i]); - while (--i >= 0) - clk_disable_unprepare(gsc->clock[i]); - return ret; - } - } + ret = devm_clk_bulk_get(dev, gsc->num_clocks, + gsc->clocks); + if (ret) + return ret; + + ret = clk_bulk_prepare_enable(gsc->num_clocks, gsc->clocks); + if (ret) + return ret; ret = devm_request_irq(dev, res->start, gsc_irq_handler, 0, pdev->name, gsc); @@ -1239,15 +1232,14 @@ static int gsc_probe(struct platform_device *pdev) err_v4l2: v4l2_device_unregister(&gsc->v4l2_dev); err_clk: - for (i = gsc->num_clocks - 1; i >= 0; i--) - clk_disable_unprepare(gsc->clock[i]); + clk_bulk_disable_unprepare(gsc->num_clocks, gsc->clocks); + return ret; } static int gsc_remove(struct platform_device *pdev) { struct gsc_dev *gsc = platform_get_drvdata(pdev); - int i; pm_runtime_get_sync(&pdev->dev); @@ -1255,8 +1247,7 @@ static int gsc_remove(struct platform_device *pdev) v4l2_device_unregister(&gsc->v4l2_dev); vb2_dma_contig_clear_max_seg_size(&pdev->dev); - for (i = 0; i < gsc->num_clocks; i++) - clk_disable_unprepare(gsc->clock[i]); + clk_bulk_disable_unprepare(gsc->num_clocks, gsc->clocks); pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -1307,18 +1298,12 @@ static int gsc_runtime_resume(struct device *dev) { struct gsc_dev *gsc = dev_get_drvdata(dev); int ret = 0; - int i; pr_debug("gsc%d: state: 0x%lx\n", gsc->id, gsc->state); - for (i = 0; i < gsc->num_clocks; i++) { - ret = clk_prepare_enable(gsc->clock[i]); - if (ret) { - while (--i >= 0) - clk_disable_unprepare(gsc->clock[i]); - return ret; - } - } + ret = clk_bulk_prepare_enable(gsc->num_clocks, gsc->clocks); + if (ret) + return ret; gsc_hw_set_sw_reset(gsc); gsc_wait_reset(gsc); @@ -1331,14 +1316,12 @@ static int gsc_runtime_suspend(struct device *dev) { struct gsc_dev *gsc = dev_get_drvdata(dev); int ret = 0; - int i; ret = gsc_m2m_suspend(gsc); if (ret) return ret; - for (i = gsc->num_clocks - 1; i >= 0; i--) - clk_disable_unprepare(gsc->clock[i]); + clk_bulk_disable_unprepare(gsc->num_clocks, gsc->clocks); pr_debug("gsc%d: state: 0x%lx\n", gsc->id, gsc->state); return ret; diff --git a/drivers/media/platform/exynos-gsc/gsc-core.h b/drivers/media/platform/exynos-gsc/gsc-core.h index 715d9c9d..08ff7b9 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.h +++ b/drivers/media/platform/exynos-gsc/gsc-core.h @@ -334,7 +334,7 @@ struct gsc_dev { struct gsc_variant *variant; u16 id; int num_clocks; - struct clk *clock[GSC_MAX_CLOCKS]; + struct clk_bulk_data *clocks; void __iomem *regs; wait_queue_head_t irq_queue; struct gsc_m2m_device m2m; -- 2.7.4