On Tue, Feb 6, 2018 at 12:38 PM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> On 02/06/2018 09:27 PM, Tim Harvey wrote:
>> Add support for the TDA1997x HDMI receivers.
>>
>> Cc: Hans Verkuil <hverkuil@xxxxxxxxx>
>> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
>> ---
>
> <snip>
>
>> +static int tda1997x_get_dv_timings_cap(struct v4l2_subdev *sd,
>> + struct v4l2_dv_timings_cap *cap)
>> +{
>> + if (cap->pad != TDA1997X_PAD_SOURCE)
>> + return -EINVAL;
>> +
>> + *cap = tda1997x_dv_timings_cap;
>> + return 0;
>> +}
>> +
>> +static int tda1997x_enum_dv_timings(struct v4l2_subdev *sd,
>> + struct v4l2_enum_dv_timings *timings)
>> +{
>> + if (timings->pad != TDA1997X_PAD_SOURCE)
>> + return -EINVAL;
>> +
>> + return v4l2_enum_dv_timings_cap(timings, &tda1997x_dv_timings_cap,
>> + NULL, NULL);
>> +}
>
> You shouldn't need this pad test: it's done in the v4l2-subdev.c core code
> already. But please double-check :-)
>
oh right - forgot to check that. Yes, v4l2-subdev.c has pad bounds
checking on all ops I use so I can remove them.
> Can you post the output of the v4l2-compliance test? I'm curious to see it.
it's in the cover letter (should I move it to the driver patch for
subsequent submittals?)
>
> Can you also try to run v4l2-compliance -m /dev/mediaX? That also tests
> whether the right entity types are set (note: testing for that should
> also happen in the subdev compliance test, but I haven't done that yet).
>
root@ventana:~# v4l2-compliance -m0
v4l2-compliance SHA : b2f8f9049056eb6f9e028927dacb2c715a062df8
Media Driver Info:
Driver name : imx-media
Model : imx-media
Serial :
Bus info :
Media version : 4.15.0
Hardware revision: 0x00000000 (0)
Driver version : 4.15.0
Compliance test for device /dev/media0:
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
fail: v4l2-test-media.cpp(141): ent.function ==
MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(256):
v2_entities_set.find(ent.id) == v2_entities_set.end()
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
test MEDIA_IOC_SETUP_LINK: OK
Total: 7, Succeeded: 5, Failed: 2, Warnings: 0
foiled again!
Is something missing after v4l2_i2c_subdev_init() or is this perhaps
something missing in the imx media drivers?
v4l2_i2c_subdev_init(sd, client, &tda1997x_subdev_ops);
snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
id->name, i2c_adapter_id(client->adapter),
client->addr);
sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
sd->entity.ops = &tda1997x_media_ops;
Regards,
Tim
