Fix module_param(virtual_channel) permissions.
This problem was detected by checkpatch:
$ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c
ERROR: Use 4 digit octal (0777) not decimal permissions
#131: FILE: drivers/media/i2c/ov5640.c:131:
+module_param(virtual_channel, int, 0);
Also add an error trace in case of virtual_channel not in
the valid range of values.
Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
---
version 2:
- Fix code as per Jacopo Mondi suggestions:
- int to uint
- no need to set global to 0
- shorten error trace
See https://www.mail-archive.com/linux-media@xxxxxxxxxxxxxxx/msg125474.html
drivers/media/i2c/ov5640.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 696a28b..3e7b43c 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -128,7 +128,7 @@ struct ov5640_pixfmt {
* to set the MIPI CSI-2 virtual channel.
*/
static unsigned int virtual_channel;
-module_param(virtual_channel, int, 0);
+module_param(virtual_channel, uint, 0444);
MODULE_PARM_DESC(virtual_channel,
"MIPI CSI-2 virtual channel (0..3), default 0");
@@ -1358,11 +1358,16 @@ static int ov5640_binning_on(struct ov5640_dev *sensor)
static int ov5640_set_virtual_channel(struct ov5640_dev *sensor)
{
+ struct i2c_client *client = sensor->i2c_client;
u8 temp, channel = virtual_channel;
int ret;
- if (channel > 3)
+ if (channel > 3) {
+ dev_err(&client->dev,
+ "%s: wrong virtual_channel parameter, expected (0..3), got %d\n",
+ __func__, channel);
return -EINVAL;
+ }
ret = ov5640_read_reg(sensor, OV5640_REG_DEBUG_MODE, &temp);
if (ret)
--
1.9.1
