Comment added about module_param()
On 01/31/2018 03:29 PM, Hugues Fruchet wrote:
> Y're welcome, changes you pointed out are detected by checkpatch
> (--strict), see below:
>
> On 01/31/2018 03:23 PM, Sakari Ailus wrote:
>> Hi Hugues,
>>
>> Thanks for the patch. It's nice to see cleanups, too! :-)
>>
>> A few comments below. Apart those this seems good to me.
>>
>> On Wed, Jan 31, 2018 at 12:22:09PM +0100, Hugues Fruchet wrote:
>>> Various typo & style fixes either detected by code
>>> review or checkpatch.
>>>
>>> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
>>> ---
>>> drivers/media/i2c/ov5640.c | 52
>>> +++++++++++++++++++++++-----------------------
>>> 1 file changed, 26 insertions(+), 26 deletions(-)
>>>
>>> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
>>> index 882a7c3..9cceb5f 100644
>>> --- a/drivers/media/i2c/ov5640.c
>>> +++ b/drivers/media/i2c/ov5640.c
>>> @@ -14,14 +14,14 @@
>>> #include <linux/ctype.h>
>>> #include <linux/delay.h>
>>> #include <linux/device.h>
>>> +#include <linux/gpio/consumer.h>
>>> #include <linux/i2c.h>
>>> #include <linux/init.h>
>>> #include <linux/module.h>
>>> #include <linux/of_device.h>
>>> +#include <linux/regulator/consumer.h>
>>> #include <linux/slab.h>
>>> #include <linux/types.h>
>>> -#include <linux/gpio/consumer.h>
>>> -#include <linux/regulator/consumer.h>
>>> #include <media/v4l2-async.h>
>>> #include <media/v4l2-ctrls.h>
>>> #include <media/v4l2-device.h>
>>> @@ -128,7 +128,7 @@ struct ov5640_pixfmt {
>>> * to set the MIPI CSI-2 virtual channel.
>>> */
>>> static unsigned int virtual_channel;
>>> -module_param(virtual_channel, int, 0);
>>> +module_param(virtual_channel, int, 0000);
>>
>> Why?
> $ scripts/checkpatch.pl -f drivers/media/i2c/ov5640.c
> ERROR: Use 4 digit octal (0777) not decimal permissions
> #131: FILE: drivers/media/i2c/ov5640.c:131:
> +module_param(virtual_channel, int, 0);
>
>
Here I feel that there was a misunderstanding on module_param() last
argument treated as initial value (0), in order to fix both
initialization to 0 and permission I would suggest:
static unsigned int virtual_channel = 0;
module_param(virtual_channel, int, 0644);
>>
>>> MODULE_PARM_DESC(virtual_channel,
>>> "MIPI CSI-2 virtual channel (0..3), default 0");
>>> @@ -139,7 +139,7 @@ struct ov5640_pixfmt {
>>> /* regulator supplies */
>>> static const char * const ov5640_supply_name[] = {
>>> - "DOVDD", /* Digital I/O (1.8V) suppply */
>>> + "DOVDD", /* Digital I/O (1.8V) supply */
>>> "DVDD", /* Digital Core (1.5V) supply */
>>> "AVDD", /* Analog (2.8V) supply */
>>> };
>>> @@ -245,7 +245,6 @@ static inline struct v4l2_subdev
>>> *ctrl_to_sd(struct v4l2_ctrl *ctrl)
>>> */
>>> static const struct reg_value ov5640_init_setting_30fps_VGA[] = {
>>> -
>>> {0x3103, 0x11, 0, 0}, {0x3008, 0x82, 0, 5}, {0x3008, 0x42, 0, 0},
>>> {0x3103, 0x03, 0, 0}, {0x3017, 0x00, 0, 0}, {0x3018, 0x00, 0, 0},
>>> {0x3034, 0x18, 0, 0}, {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0},
>>> @@ -334,7 +333,6 @@ static inline struct v4l2_subdev
>>> *ctrl_to_sd(struct v4l2_ctrl *ctrl)
>>> };
>>> static const struct reg_value ov5640_setting_30fps_VGA_640_480[] = {
>>> -
>>> {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
>>> {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
>>> {0x3820, 0x41, 0, 0}, {0x3821, 0x07, 0, 0}, {0x3814, 0x31, 0, 0},
>>> @@ -377,7 +375,6 @@ static inline struct v4l2_subdev
>>> *ctrl_to_sd(struct v4l2_ctrl *ctrl)
>>> };
>>> static const struct reg_value ov5640_setting_30fps_XGA_1024_768[] = {
>>> -
>>> {0x3035, 0x14, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
>>> {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
>>> {0x3820, 0x41, 0, 0}, {0x3821, 0x07, 0, 0}, {0x3814, 0x31, 0, 0},
>>> @@ -484,6 +481,7 @@ static inline struct v4l2_subdev
>>> *ctrl_to_sd(struct v4l2_ctrl *ctrl)
>>> {0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
>>> {0x3824, 0x02, 0, 0}, {0x5001, 0xa3, 0, 0},
>>> };
>>> +
>>> static const struct reg_value ov5640_setting_15fps_QCIF_176_144[] = {
>>> {0x3035, 0x22, 0, 0}, {0x3036, 0x38, 0, 0}, {0x3c07, 0x08, 0, 0},
>>> {0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
>>> @@ -840,7 +838,7 @@ static int ov5640_write_reg(struct ov5640_dev
>>> *sensor, u16 reg, u8 val)
>>> ret = i2c_transfer(client->adapter, &msg, 1);
>>> if (ret < 0) {
>>> v4l2_err(&sensor->sd, "%s: error: reg=%x, val=%x\n",
>>> - __func__, reg, val);
>>> + __func__, reg, val);
>>> return ret;
>>> }
>>> @@ -886,7 +884,7 @@ static int ov5640_read_reg16(struct ov5640_dev
>>> *sensor, u16 reg, u16 *val)
>>> ret = ov5640_read_reg(sensor, reg, &hi);
>>> if (ret)
>>> return ret;
>>> - ret = ov5640_read_reg(sensor, reg+1, &lo);
>>> + ret = ov5640_read_reg(sensor, reg + 1, &lo);
>>> if (ret)
>>> return ret;
>>> @@ -947,7 +945,7 @@ static int ov5640_load_regs(struct ov5640_dev
>>> *sensor,
>>> break;
>>> if (delay_ms)
>>> - usleep_range(1000*delay_ms, 1000*delay_ms+100);
>>> + usleep_range(1000 * delay_ms, 1000 * delay_ms + 100);
>>> }
>>> return ret;
>>> @@ -1289,7 +1287,6 @@ static int ov5640_set_bandingfilter(struct
>>> ov5640_dev *sensor)
>>> return ret;
>>> prev_vts = ret;
>>> -
>>> /* calculate banding filter */
>>> /* 60Hz */
>>> band_step60 = sensor->prev_sysclk * 100 / sensor->prev_hts *
>>> 100 / 120;
>>> @@ -1405,8 +1402,8 @@ static int ov5640_set_virtual_channel(struct
>>> ov5640_dev *sensor)
>>> * sensor changes between scaling and subsampling, go through
>>> * exposure calculation
>>> */
>>> -static int ov5640_set_mode_exposure_calc(
>>> - struct ov5640_dev *sensor, const struct ov5640_mode_info *mode)
>>> +static int ov5640_set_mode_exposure_calc(struct ov5640_dev *sensor,
>>> + const struct ov5640_mode_info *mode)
>>> {
>>> u32 prev_shutter, prev_gain16;
>>> u32 cap_shutter, cap_gain16;
>>> @@ -1416,7 +1413,7 @@ static int ov5640_set_mode_exposure_calc(
>>> u8 average;
>>> int ret;
>>> - if (mode->reg_data == NULL)
>>> + if (!mode->reg_data)
>>> return -EINVAL;
>>> /* read preview shutter */
>>> @@ -1570,7 +1567,7 @@ static int ov5640_set_mode_direct(struct
>>> ov5640_dev *sensor,
>>> {
>>> int ret;
>>> - if (mode->reg_data == NULL)
>>> + if (!mode->reg_data)
>>> return -EINVAL;
>>> /* Write capture setting */
>>> @@ -2117,7 +2114,8 @@ static int ov5640_set_ctrl_gain(struct
>>> ov5640_dev *sensor, int auto_gain)
>>> if (ctrls->auto_gain->is_new) {
>>> ret = ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL,
>>> - BIT(1), ctrls->auto_gain->val ? 0 : BIT(1));
>>> + BIT(1),
>>> + ctrls->auto_gain->val ? 0 : BIT(1));
>>> if (ret)
>>> return ret;
>>> }
>>> @@ -2297,18 +2295,20 @@ static int ov5640_enum_frame_size(struct
>>> v4l2_subdev *sd,
>>> if (fse->index >= OV5640_NUM_MODES)
>>> return -EINVAL;
>>> - fse->min_width = fse->max_width =
>>> + fse->min_width =
>>> ov5640_mode_data[0][fse->index].width;
>>> - fse->min_height = fse->max_height =
>>> + fse->max_width = fse->min_width;
>>> + fse->min_height =
>>> ov5640_mode_data[0][fse->index].height;
>>> + fse->max_height = fse->min_height;
>>> return 0;
>>> }
>>> -static int ov5640_enum_frame_interval(
>>> - struct v4l2_subdev *sd,
>>> - struct v4l2_subdev_pad_config *cfg,
>>> - struct v4l2_subdev_frame_interval_enum *fie)
> CHECK: Lines should not end with a '('
> #2309: FILE: drivers/media/i2c/ov5640.c:2309:
> +static int ov5640_enum_frame_interval(
>
>>> +static int ov5640_enum_frame_interval
>>> + (struct v4l2_subdev *sd,
>>> + struct v4l2_subdev_pad_config *cfg,
>>> + struct v4l2_subdev_frame_interval_enum *fie)
>
>>> {
>>> struct ov5640_dev *sensor = to_ov5640_dev(sd);
>>> struct v4l2_fract tpf;
>>> @@ -2376,8 +2376,8 @@ static int ov5640_s_frame_interval(struct
>>> v4l2_subdev *sd,
>>> }
>>> static int ov5640_enum_mbus_code(struct v4l2_subdev *sd,
>>> - struct v4l2_subdev_pad_config *cfg,
>>> - struct v4l2_subdev_mbus_code_enum *code)
>>> + struct v4l2_subdev_pad_config *cfg,
>>> + struct v4l2_subdev_mbus_code_enum *code)
>>> {
>>> if (code->pad != 0)
>>> return -EINVAL;
>>> @@ -2509,8 +2509,8 @@ static int ov5640_probe(struct i2c_client *client,
>>> sensor->ae_target = 52;
>>> - endpoint = fwnode_graph_get_next_endpoint(
>>> - of_fwnode_handle(client->dev.of_node), NULL);
>>> + endpoint = fwnode_graph_get_next_endpoint
>>> + (of_fwnode_handle(client->dev.of_node), NULL);
>>
>> Hmm. This looks weird to me. Isn't the change rather against the common
>> practices? The same on ov5640_enum_frame_interval prototype change.
>>
> CHECK: Lines should not end with a '('
> #2513: FILE: drivers/media/i2c/ov5640.c:2513:
> + endpoint = fwnode_graph_get_next_endpoint(
>
>
>>> if (!endpoint) {
>>> dev_err(dev, "endpoint node not found\n");
>>> return -EINVAL;
>>
