From: Santiago Nunez-Corrales <santiago.nunez@xxxxxxxxxxxx> This patch provides menu configuration options for the TVP7002 decoder driver in DM365. Signed-off-by: Santiago Nunez-Corrales <santiago.nunez@xxxxxxxxxxxx> --- drivers/media/video/Kconfig | 41 +++++++++++++++++++++++++++++++++++++++++ drivers/media/video/Makefile | 3 +++ 2 files changed, 44 insertions(+), 0 deletions(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index e6186b3..de3328b 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -392,6 +392,15 @@ config VIDEO_TVP5150 To compile this driver as a module, choose M here: the module will be called tvp5150. +config VIDEO_TVP7002 + tristate "Texas Instruments TVP7002 video decoder" + depends on VIDEO_V4L2 && I2C + ---help--- + Support for the Texas Instruments TVP7002 video decoder. + + To compile this driver as a module, choose M here: the + module will be called tvp7002. + config VIDEO_VPX3220 tristate "vpx3220a, vpx3216b & vpx3214c video decoders" depends on VIDEO_V4L2 && I2C @@ -466,6 +475,29 @@ config VIDEO_THS7303 To compile this driver as a module, choose M here: the module will be called ths7303. +config VIDEO_THS7353 + tristate "THS7353 Video Amplifier" + depends on I2C + help + Support for TI THS7353 video amplifier + + To compile this driver as a module, choose M here: the + module will be called ths7353. + +config VIDEO_THS7353_LUMA_CHANNEL + int "THS7353 channel number for Luma Input" + default 3 + depends on VIDEO_THS7353 + help + Select the luma channel number for the THS7353 input. + + THS7353 has three identical channels. For the component + interface, luma input will be connected to one of these + channels and cb and cr will be connected to other channels + This config option is used to select the luma input channel + number. Possible values for this option are 1,2 or 3. Any + other value will result in value 2. + config VIDEO_ADV7343 tristate "ADV7343 video encoder" depends on I2C @@ -475,6 +507,15 @@ config VIDEO_ADV7343 To compile this driver as a module, choose M here: the module will be called adv7343. +config VIDEO_THS8200 + tristate "THS8200 video encoder" + depends on I2C + help + Support for Analog Devices I2C bus based THS8200 encoder. + + To compile this driver as a module, choose M here: the + module will be called ths8200. + comment "Video improvement chips" config VIDEO_UPD64031A diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index e541932..5327ff4 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -47,15 +47,18 @@ obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o +obj-$(CONFIG_VIDEO_THS8200) += ths8200.o obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o obj-$(CONFIG_VIDEO_BT819) += bt819.o obj-$(CONFIG_VIDEO_BT856) += bt856.o obj-$(CONFIG_VIDEO_BT866) += bt866.o obj-$(CONFIG_VIDEO_KS0127) += ks0127.o obj-$(CONFIG_VIDEO_THS7303) += ths7303.o +obj-$(CONFIG_VIDEO_THS7353) += ths7353.o obj-$(CONFIG_VIDEO_VINO) += indycam.o obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o +obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o obj-$(CONFIG_VIDEO_CS5345) += cs5345.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
