[PATCH v6 7/9] v4l: i2c: Copy tw9910 soc_camera sensor driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Copy the soc_camera based driver in v4l2 sensor driver directory.
This commit just copies the original file without modifying it.
No modification to KConfig and Makefile as soc_camera framework
dependencies need to be removed first in next commit.

Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Acked-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
 drivers/media/i2c/tw9910.c | 999 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 999 insertions(+)
 create mode 100644 drivers/media/i2c/tw9910.c

diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c
new file mode 100644
index 0000000..bdb5e0a
--- /dev/null
+++ b/drivers/media/i2c/tw9910.c
@@ -0,0 +1,999 @@
+/*
+ * tw9910 Video Driver
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@xxxxxxxxxxx>
+ *
+ * Based on ov772x driver,
+ *
+ * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@xxxxxxxxxxx>
+ * Copyright 2006-7 Jonathan Corbet <corbet@xxxxxxx>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
+#include <media/i2c/tw9910.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-subdev.h>
+
+#define GET_ID(val)  ((val & 0xF8) >> 3)
+#define GET_REV(val) (val & 0x07)
+
+/*
+ * register offset
+ */
+#define ID		0x00 /* Product ID Code Register */
+#define STATUS1		0x01 /* Chip Status Register I */
+#define INFORM		0x02 /* Input Format */
+#define OPFORM		0x03 /* Output Format Control Register */
+#define DLYCTR		0x04 /* Hysteresis and HSYNC Delay Control */
+#define OUTCTR1		0x05 /* Output Control I */
+#define ACNTL1		0x06 /* Analog Control Register 1 */
+#define CROP_HI		0x07 /* Cropping Register, High */
+#define VDELAY_LO	0x08 /* Vertical Delay Register, Low */
+#define VACTIVE_LO	0x09 /* Vertical Active Register, Low */
+#define HDELAY_LO	0x0A /* Horizontal Delay Register, Low */
+#define HACTIVE_LO	0x0B /* Horizontal Active Register, Low */
+#define CNTRL1		0x0C /* Control Register I */
+#define VSCALE_LO	0x0D /* Vertical Scaling Register, Low */
+#define SCALE_HI	0x0E /* Scaling Register, High */
+#define HSCALE_LO	0x0F /* Horizontal Scaling Register, Low */
+#define BRIGHT		0x10 /* BRIGHTNESS Control Register */
+#define CONTRAST	0x11 /* CONTRAST Control Register */
+#define SHARPNESS	0x12 /* SHARPNESS Control Register I */
+#define SAT_U		0x13 /* Chroma (U) Gain Register */
+#define SAT_V		0x14 /* Chroma (V) Gain Register */
+#define HUE		0x15 /* Hue Control Register */
+#define CORING1		0x17
+#define CORING2		0x18 /* Coring and IF compensation */
+#define VBICNTL		0x19 /* VBI Control Register */
+#define ACNTL2		0x1A /* Analog Control 2 */
+#define OUTCTR2		0x1B /* Output Control 2 */
+#define SDT		0x1C /* Standard Selection */
+#define SDTR		0x1D /* Standard Recognition */
+#define TEST		0x1F /* Test Control Register */
+#define CLMPG		0x20 /* Clamping Gain */
+#define IAGC		0x21 /* Individual AGC Gain */
+#define AGCGAIN		0x22 /* AGC Gain */
+#define PEAKWT		0x23 /* White Peak Threshold */
+#define CLMPL		0x24 /* Clamp level */
+#define SYNCT		0x25 /* Sync Amplitude */
+#define MISSCNT		0x26 /* Sync Miss Count Register */
+#define PCLAMP		0x27 /* Clamp Position Register */
+#define VCNTL1		0x28 /* Vertical Control I */
+#define VCNTL2		0x29 /* Vertical Control II */
+#define CKILL		0x2A /* Color Killer Level Control */
+#define COMB		0x2B /* Comb Filter Control */
+#define LDLY		0x2C /* Luma Delay and H Filter Control */
+#define MISC1		0x2D /* Miscellaneous Control I */
+#define LOOP		0x2E /* LOOP Control Register */
+#define MISC2		0x2F /* Miscellaneous Control II */
+#define MVSN		0x30 /* Macrovision Detection */
+#define STATUS2		0x31 /* Chip STATUS II */
+#define HFREF		0x32 /* H monitor */
+#define CLMD		0x33 /* CLAMP MODE */
+#define IDCNTL		0x34 /* ID Detection Control */
+#define CLCNTL1		0x35 /* Clamp Control I */
+#define ANAPLLCTL	0x4C
+#define VBIMIN		0x4D
+#define HSLOWCTL	0x4E
+#define WSS3		0x4F
+#define FILLDATA	0x50
+#define SDID		0x51
+#define DID		0x52
+#define WSS1		0x53
+#define WSS2		0x54
+#define VVBI		0x55
+#define LCTL6		0x56
+#define LCTL7		0x57
+#define LCTL8		0x58
+#define LCTL9		0x59
+#define LCTL10		0x5A
+#define LCTL11		0x5B
+#define LCTL12		0x5C
+#define LCTL13		0x5D
+#define LCTL14		0x5E
+#define LCTL15		0x5F
+#define LCTL16		0x60
+#define LCTL17		0x61
+#define LCTL18		0x62
+#define LCTL19		0x63
+#define LCTL20		0x64
+#define LCTL21		0x65
+#define LCTL22		0x66
+#define LCTL23		0x67
+#define LCTL24		0x68
+#define LCTL25		0x69
+#define LCTL26		0x6A
+#define HSBEGIN		0x6B
+#define HSEND		0x6C
+#define OVSDLY		0x6D
+#define OVSEND		0x6E
+#define VBIDELAY	0x6F
+
+/*
+ * register detail
+ */
+
+/* INFORM */
+#define FC27_ON     0x40 /* 1 : Input crystal clock frequency is 27MHz */
+#define FC27_FF     0x00 /* 0 : Square pixel mode. */
+			 /*     Must use 24.54MHz for 60Hz field rate */
+			 /*     source or 29.5MHz for 50Hz field rate */
+#define IFSEL_S     0x10 /* 01 : S-video decoding */
+#define IFSEL_C     0x00 /* 00 : Composite video decoding */
+			 /* Y input video selection */
+#define YSEL_M0     0x00 /*  00 : Mux0 selected */
+#define YSEL_M1     0x04 /*  01 : Mux1 selected */
+#define YSEL_M2     0x08 /*  10 : Mux2 selected */
+#define YSEL_M3     0x10 /*  11 : Mux3 selected */
+
+/* OPFORM */
+#define MODE        0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */
+			 /* 1 : ITU-R-656 compatible data sequence format */
+#define LEN         0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */
+			 /* 1 : 16-bit YCrCb 4:2:2 output format.*/
+#define LLCMODE     0x20 /* 1 : LLC output mode. */
+			 /* 0 : free-run output mode */
+#define AINC        0x10 /* Serial interface auto-indexing control */
+			 /* 0 : auto-increment */
+			 /* 1 : non-auto */
+#define VSCTL       0x08 /* 1 : Vertical out ctrl by DVALID */
+			 /* 0 : Vertical out ctrl by HACTIVE and DVALID */
+#define OEN_TRI_SEL_MASK	0x07
+#define OEN_TRI_SEL_ALL_ON	0x00 /* Enable output for Rev0/Rev1 */
+#define OEN_TRI_SEL_ALL_OFF_r0	0x06 /* All tri-stated for Rev0 */
+#define OEN_TRI_SEL_ALL_OFF_r1	0x07 /* All tri-stated for Rev1 */
+
+/* OUTCTR1 */
+#define VSP_LO      0x00 /* 0 : VS pin output polarity is active low */
+#define VSP_HI      0x80 /* 1 : VS pin output polarity is active high. */
+			 /* VS pin output control */
+#define VSSL_VSYNC  0x00 /*   0 : VSYNC  */
+#define VSSL_VACT   0x10 /*   1 : VACT   */
+#define VSSL_FIELD  0x20 /*   2 : FIELD  */
+#define VSSL_VVALID 0x30 /*   3 : VVALID */
+#define VSSL_ZERO   0x70 /*   7 : 0      */
+#define HSP_LOW     0x00 /* 0 : HS pin output polarity is active low */
+#define HSP_HI      0x08 /* 1 : HS pin output polarity is active high.*/
+			 /* HS pin output control */
+#define HSSL_HACT   0x00 /*   0 : HACT   */
+#define HSSL_HSYNC  0x01 /*   1 : HSYNC  */
+#define HSSL_DVALID 0x02 /*   2 : DVALID */
+#define HSSL_HLOCK  0x03 /*   3 : HLOCK  */
+#define HSSL_ASYNCW 0x04 /*   4 : ASYNCW */
+#define HSSL_ZERO   0x07 /*   7 : 0      */
+
+/* ACNTL1 */
+#define SRESET      0x80 /* resets the device to its default state
+			  * but all register content remain unchanged.
+			  * This bit is self-resetting.
+			  */
+#define ACNTL1_PDN_MASK	0x0e
+#define CLK_PDN		0x08 /* system clock power down */
+#define Y_PDN		0x04 /* Luma ADC power down */
+#define C_PDN		0x02 /* Chroma ADC power down */
+
+/* ACNTL2 */
+#define ACNTL2_PDN_MASK	0x40
+#define PLL_PDN		0x40 /* PLL power down */
+
+/* VBICNTL */
+
+/* RTSEL : control the real time signal output from the MPOUT pin */
+#define RTSEL_MASK  0x07
+#define RTSEL_VLOSS 0x00 /* 0000 = Video loss */
+#define RTSEL_HLOCK 0x01 /* 0001 = H-lock */
+#define RTSEL_SLOCK 0x02 /* 0010 = S-lock */
+#define RTSEL_VLOCK 0x03 /* 0011 = V-lock */
+#define RTSEL_MONO  0x04 /* 0100 = MONO */
+#define RTSEL_DET50 0x05 /* 0101 = DET50 */
+#define RTSEL_FIELD 0x06 /* 0110 = FIELD */
+#define RTSEL_RTCO  0x07 /* 0111 = RTCO ( Real Time Control ) */
+
+/* HSYNC start and end are constant for now */
+#define HSYNC_START	0x0260
+#define HSYNC_END	0x0300
+
+/*
+ * structure
+ */
+
+struct regval_list {
+	unsigned char reg_num;
+	unsigned char value;
+};
+
+struct tw9910_scale_ctrl {
+	char           *name;
+	unsigned short  width;
+	unsigned short  height;
+	u16             hscale;
+	u16             vscale;
+};
+
+struct tw9910_priv {
+	struct v4l2_subdev		subdev;
+	struct v4l2_clk			*clk;
+	struct tw9910_video_info	*info;
+	const struct tw9910_scale_ctrl	*scale;
+	v4l2_std_id			norm;
+	u32				revision;
+};
+
+static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = {
+	{
+		.name   = "NTSC SQ",
+		.width  = 640,
+		.height = 480,
+		.hscale = 0x0100,
+		.vscale = 0x0100,
+	},
+	{
+		.name   = "NTSC CCIR601",
+		.width  = 720,
+		.height = 480,
+		.hscale = 0x0100,
+		.vscale = 0x0100,
+	},
+	{
+		.name   = "NTSC SQ (CIF)",
+		.width  = 320,
+		.height = 240,
+		.hscale = 0x0200,
+		.vscale = 0x0200,
+	},
+	{
+		.name   = "NTSC CCIR601 (CIF)",
+		.width  = 360,
+		.height = 240,
+		.hscale = 0x0200,
+		.vscale = 0x0200,
+	},
+	{
+		.name   = "NTSC SQ (QCIF)",
+		.width  = 160,
+		.height = 120,
+		.hscale = 0x0400,
+		.vscale = 0x0400,
+	},
+	{
+		.name   = "NTSC CCIR601 (QCIF)",
+		.width  = 180,
+		.height = 120,
+		.hscale = 0x0400,
+		.vscale = 0x0400,
+	},
+};
+
+static const struct tw9910_scale_ctrl tw9910_pal_scales[] = {
+	{
+		.name   = "PAL SQ",
+		.width  = 768,
+		.height = 576,
+		.hscale = 0x0100,
+		.vscale = 0x0100,
+	},
+	{
+		.name   = "PAL CCIR601",
+		.width  = 720,
+		.height = 576,
+		.hscale = 0x0100,
+		.vscale = 0x0100,
+	},
+	{
+		.name   = "PAL SQ (CIF)",
+		.width  = 384,
+		.height = 288,
+		.hscale = 0x0200,
+		.vscale = 0x0200,
+	},
+	{
+		.name   = "PAL CCIR601 (CIF)",
+		.width  = 360,
+		.height = 288,
+		.hscale = 0x0200,
+		.vscale = 0x0200,
+	},
+	{
+		.name   = "PAL SQ (QCIF)",
+		.width  = 192,
+		.height = 144,
+		.hscale = 0x0400,
+		.vscale = 0x0400,
+	},
+	{
+		.name   = "PAL CCIR601 (QCIF)",
+		.width  = 180,
+		.height = 144,
+		.hscale = 0x0400,
+		.vscale = 0x0400,
+	},
+};
+
+/*
+ * general function
+ */
+static struct tw9910_priv *to_tw9910(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct tw9910_priv,
+			    subdev);
+}
+
+static int tw9910_mask_set(struct i2c_client *client, u8 command,
+			   u8 mask, u8 set)
+{
+	s32 val = i2c_smbus_read_byte_data(client, command);
+	if (val < 0)
+		return val;
+
+	val &= ~mask;
+	val |= set & mask;
+
+	return i2c_smbus_write_byte_data(client, command, val);
+}
+
+static int tw9910_set_scale(struct i2c_client *client,
+			    const struct tw9910_scale_ctrl *scale)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, SCALE_HI,
+					(scale->vscale & 0x0F00) >> 4 |
+					(scale->hscale & 0x0F00) >> 8);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, HSCALE_LO,
+					scale->hscale & 0x00FF);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, VSCALE_LO,
+					scale->vscale & 0x00FF);
+
+	return ret;
+}
+
+static int tw9910_set_hsync(struct i2c_client *client)
+{
+	struct tw9910_priv *priv = to_tw9910(client);
+	int ret;
+
+	/* bit 10 - 3 */
+	ret = i2c_smbus_write_byte_data(client, HSBEGIN,
+					(HSYNC_START & 0x07F8) >> 3);
+	if (ret < 0)
+		return ret;
+
+	/* bit 10 - 3 */
+	ret = i2c_smbus_write_byte_data(client, HSEND,
+					(HSYNC_END & 0x07F8) >> 3);
+	if (ret < 0)
+		return ret;
+
+	/* So far only revisions 0 and 1 have been seen */
+	/* bit 2 - 0 */
+	if (1 == priv->revision)
+		ret = tw9910_mask_set(client, HSLOWCTL, 0x77,
+				      (HSYNC_START & 0x0007) << 4 |
+				      (HSYNC_END   & 0x0007));
+
+	return ret;
+}
+
+static void tw9910_reset(struct i2c_client *client)
+{
+	tw9910_mask_set(client, ACNTL1, SRESET, SRESET);
+	msleep(1);
+}
+
+static int tw9910_power(struct i2c_client *client, int enable)
+{
+	int ret;
+	u8 acntl1;
+	u8 acntl2;
+
+	if (enable) {
+		acntl1 = 0;
+		acntl2 = 0;
+	} else {
+		acntl1 = CLK_PDN | Y_PDN | C_PDN;
+		acntl2 = PLL_PDN;
+	}
+
+	ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1);
+	if (ret < 0)
+		return ret;
+
+	return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2);
+}
+
+static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm,
+							  u32 width, u32 height)
+{
+	const struct tw9910_scale_ctrl *scale;
+	const struct tw9910_scale_ctrl *ret = NULL;
+	__u32 diff = 0xffffffff, tmp;
+	int size, i;
+
+	if (norm & V4L2_STD_NTSC) {
+		scale = tw9910_ntsc_scales;
+		size = ARRAY_SIZE(tw9910_ntsc_scales);
+	} else if (norm & V4L2_STD_PAL) {
+		scale = tw9910_pal_scales;
+		size = ARRAY_SIZE(tw9910_pal_scales);
+	} else {
+		return NULL;
+	}
+
+	for (i = 0; i < size; i++) {
+		tmp = abs(width - scale[i].width) +
+			abs(height - scale[i].height);
+		if (tmp < diff) {
+			diff = tmp;
+			ret = scale + i;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * subdevice operations
+ */
+static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+	u8 val;
+	int ret;
+
+	if (!enable) {
+		switch (priv->revision) {
+		case 0:
+			val = OEN_TRI_SEL_ALL_OFF_r0;
+			break;
+		case 1:
+			val = OEN_TRI_SEL_ALL_OFF_r1;
+			break;
+		default:
+			dev_err(&client->dev, "un-supported revision\n");
+			return -EINVAL;
+		}
+	} else {
+		val = OEN_TRI_SEL_ALL_ON;
+
+		if (!priv->scale) {
+			dev_err(&client->dev, "norm select error\n");
+			return -EPERM;
+		}
+
+		dev_dbg(&client->dev, "%s %dx%d\n",
+			priv->scale->name,
+			priv->scale->width,
+			priv->scale->height);
+	}
+
+	ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val);
+	if (ret < 0)
+		return ret;
+
+	return tw9910_power(client, enable);
+}
+
+static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+
+	*norm = priv->norm;
+
+	return 0;
+}
+
+static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+	const unsigned hact = 720;
+	const unsigned hdelay = 15;
+	unsigned vact;
+	unsigned vdelay;
+	int ret;
+
+	if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
+		return -EINVAL;
+
+	priv->norm = norm;
+	if (norm & V4L2_STD_525_60) {
+		vact = 240;
+		vdelay = 18;
+		ret = tw9910_mask_set(client, VVBI, 0x10, 0x10);
+	} else {
+		vact = 288;
+		vdelay = 24;
+		ret = tw9910_mask_set(client, VVBI, 0x10, 0x00);
+	}
+	if (!ret)
+		ret = i2c_smbus_write_byte_data(client, CROP_HI,
+			((vdelay >> 2) & 0xc0) |
+			((vact >> 4) & 0x30) |
+			((hdelay >> 6) & 0x0c) |
+			((hact >> 8) & 0x03));
+	if (!ret)
+		ret = i2c_smbus_write_byte_data(client, VDELAY_LO,
+			vdelay & 0xff);
+	if (!ret)
+		ret = i2c_smbus_write_byte_data(client, VACTIVE_LO,
+			vact & 0xff);
+
+	return ret;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int tw9910_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+
+	if (reg->reg > 0xff)
+		return -EINVAL;
+
+	reg->size = 1;
+	ret = i2c_smbus_read_byte_data(client, reg->reg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * ret      = int
+	 * reg->val = __u64
+	 */
+	reg->val = (__u64)ret;
+
+	return 0;
+}
+
+static int tw9910_s_register(struct v4l2_subdev *sd,
+			     const struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg > 0xff ||
+	    reg->val > 0xff)
+		return -EINVAL;
+
+	return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
+}
+#endif
+
+static int tw9910_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	struct tw9910_priv *priv = to_tw9910(client);
+
+	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
+}
+
+static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+	int ret = -EINVAL;
+	u8 val;
+
+	/*
+	 * select suitable norm
+	 */
+	priv->scale = tw9910_select_norm(priv->norm, *width, *height);
+	if (!priv->scale)
+		goto tw9910_set_fmt_error;
+
+	/*
+	 * reset hardware
+	 */
+	tw9910_reset(client);
+
+	/*
+	 * set bus width
+	 */
+	val = 0x00;
+	if (SOCAM_DATAWIDTH_16 == priv->info->buswidth)
+		val = LEN;
+
+	ret = tw9910_mask_set(client, OPFORM, LEN, val);
+	if (ret < 0)
+		goto tw9910_set_fmt_error;
+
+	/*
+	 * select MPOUT behavior
+	 */
+	switch (priv->info->mpout) {
+	case TW9910_MPO_VLOSS:
+		val = RTSEL_VLOSS; break;
+	case TW9910_MPO_HLOCK:
+		val = RTSEL_HLOCK; break;
+	case TW9910_MPO_SLOCK:
+		val = RTSEL_SLOCK; break;
+	case TW9910_MPO_VLOCK:
+		val = RTSEL_VLOCK; break;
+	case TW9910_MPO_MONO:
+		val = RTSEL_MONO;  break;
+	case TW9910_MPO_DET50:
+		val = RTSEL_DET50; break;
+	case TW9910_MPO_FIELD:
+		val = RTSEL_FIELD; break;
+	case TW9910_MPO_RTCO:
+		val = RTSEL_RTCO;  break;
+	default:
+		val = 0;
+	}
+
+	ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val);
+	if (ret < 0)
+		goto tw9910_set_fmt_error;
+
+	/*
+	 * set scale
+	 */
+	ret = tw9910_set_scale(client, priv->scale);
+	if (ret < 0)
+		goto tw9910_set_fmt_error;
+
+	/*
+	 * set hsync
+	 */
+	ret = tw9910_set_hsync(client);
+	if (ret < 0)
+		goto tw9910_set_fmt_error;
+
+	*width = priv->scale->width;
+	*height = priv->scale->height;
+
+	return ret;
+
+tw9910_set_fmt_error:
+
+	tw9910_reset(client);
+	priv->scale = NULL;
+
+	return ret;
+}
+
+static int tw9910_get_selection(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_selection *sel)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+
+	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+		return -EINVAL;
+	/* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported */
+	if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS)
+		return -EINVAL;
+
+	sel->r.left	= 0;
+	sel->r.top	= 0;
+	if (priv->norm & V4L2_STD_NTSC) {
+		sel->r.width	= 640;
+		sel->r.height	= 480;
+	} else {
+		sel->r.width	= 768;
+		sel->r.height	= 576;
+	}
+	return 0;
+}
+
+static int tw9910_get_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+
+	if (format->pad)
+		return -EINVAL;
+
+	if (!priv->scale) {
+		priv->scale = tw9910_select_norm(priv->norm, 640, 480);
+		if (!priv->scale)
+			return -EINVAL;
+	}
+
+	mf->width	= priv->scale->width;
+	mf->height	= priv->scale->height;
+	mf->code	= MEDIA_BUS_FMT_UYVY8_2X8;
+	mf->colorspace	= V4L2_COLORSPACE_SMPTE170M;
+	mf->field	= V4L2_FIELD_INTERLACED_BT;
+
+	return 0;
+}
+
+static int tw9910_s_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	u32 width = mf->width, height = mf->height;
+	int ret;
+
+	WARN_ON(mf->field != V4L2_FIELD_ANY &&
+		mf->field != V4L2_FIELD_INTERLACED_BT);
+
+	/*
+	 * check color format
+	 */
+	if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8)
+		return -EINVAL;
+
+	mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	ret = tw9910_set_frame(sd, &width, &height);
+	if (!ret) {
+		mf->width	= width;
+		mf->height	= height;
+	}
+	return ret;
+}
+
+static int tw9910_set_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mf = &format->format;
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct tw9910_priv *priv = to_tw9910(client);
+	const struct tw9910_scale_ctrl *scale;
+
+	if (format->pad)
+		return -EINVAL;
+
+	if (V4L2_FIELD_ANY == mf->field) {
+		mf->field = V4L2_FIELD_INTERLACED_BT;
+	} else if (V4L2_FIELD_INTERLACED_BT != mf->field) {
+		dev_err(&client->dev, "Field type %d invalid.\n", mf->field);
+		return -EINVAL;
+	}
+
+	mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
+	mf->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	/*
+	 * select suitable norm
+	 */
+	scale = tw9910_select_norm(priv->norm, mf->width, mf->height);
+	if (!scale)
+		return -EINVAL;
+
+	mf->width	= scale->width;
+	mf->height	= scale->height;
+
+	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
+		return tw9910_s_fmt(sd, mf);
+	cfg->try_fmt = *mf;
+	return 0;
+}
+
+static int tw9910_video_probe(struct i2c_client *client)
+{
+	struct tw9910_priv *priv = to_tw9910(client);
+	s32 id;
+	int ret;
+
+	/*
+	 * tw9910 only use 8 or 16 bit bus width
+	 */
+	if (SOCAM_DATAWIDTH_16 != priv->info->buswidth &&
+	    SOCAM_DATAWIDTH_8  != priv->info->buswidth) {
+		dev_err(&client->dev, "bus width error\n");
+		return -ENODEV;
+	}
+
+	ret = tw9910_s_power(&priv->subdev, 1);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * check and show Product ID
+	 * So far only revisions 0 and 1 have been seen
+	 */
+	id = i2c_smbus_read_byte_data(client, ID);
+	priv->revision = GET_REV(id);
+	id = GET_ID(id);
+
+	if (0x0B != id ||
+	    0x01 < priv->revision) {
+		dev_err(&client->dev,
+			"Product ID error %x:%x\n",
+			id, priv->revision);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	dev_info(&client->dev,
+		 "tw9910 Product ID %0x:%0x\n", id, priv->revision);
+
+	priv->norm = V4L2_STD_NTSC;
+	priv->scale = &tw9910_ntsc_scales[0];
+
+done:
+	tw9910_s_power(&priv->subdev, 0);
+	return ret;
+}
+
+static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= tw9910_g_register,
+	.s_register	= tw9910_s_register,
+#endif
+	.s_power	= tw9910_s_power,
+};
+
+static int tw9910_enum_mbus_code(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index)
+		return -EINVAL;
+
+	code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+	return 0;
+}
+
+static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	return 0;
+}
+
+static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	u8 val = VSSL_VVALID | HSSL_DVALID;
+	unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	/*
+	 * set OUTCTR1
+	 *
+	 * We use VVALID and DVALID signals to control VSYNC and HSYNC
+	 * outputs, in this mode their polarity is inverted.
+	 */
+	if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+		val |= HSP_HI;
+
+	if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+		val |= VSP_HI;
+
+	return i2c_smbus_write_byte_data(client, OUTCTR1, val);
+}
+
+static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm)
+{
+	*norm = V4L2_STD_NTSC | V4L2_STD_PAL;
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
+	.s_std		= tw9910_s_std,
+	.g_std		= tw9910_g_std,
+	.s_stream	= tw9910_s_stream,
+	.g_mbus_config	= tw9910_g_mbus_config,
+	.s_mbus_config	= tw9910_s_mbus_config,
+	.g_tvnorms	= tw9910_g_tvnorms,
+};
+
+static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = {
+	.enum_mbus_code = tw9910_enum_mbus_code,
+	.get_selection	= tw9910_get_selection,
+	.get_fmt	= tw9910_get_fmt,
+	.set_fmt	= tw9910_set_fmt,
+};
+
+static const struct v4l2_subdev_ops tw9910_subdev_ops = {
+	.core	= &tw9910_subdev_core_ops,
+	.video	= &tw9910_subdev_video_ops,
+	.pad	= &tw9910_subdev_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+
+static int tw9910_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+
+{
+	struct tw9910_priv		*priv;
+	struct tw9910_video_info	*info;
+	struct i2c_adapter		*adapter =
+		to_i2c_adapter(client->dev.parent);
+	struct soc_camera_subdev_desc	*ssdd = soc_camera_i2c_to_desc(client);
+	int ret;
+
+	if (!ssdd || !ssdd->drv_priv) {
+		dev_err(&client->dev, "TW9910: missing platform data!\n");
+		return -EINVAL;
+	}
+
+	info = ssdd->drv_priv;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev,
+			"I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
+		return -EIO;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->info   = info;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
+
+	priv->clk = v4l2_clk_get(&client->dev, "mclk");
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	ret = tw9910_video_probe(client);
+	if (ret < 0)
+		v4l2_clk_put(priv->clk);
+
+	return ret;
+}
+
+static int tw9910_remove(struct i2c_client *client)
+{
+	struct tw9910_priv *priv = to_tw9910(client);
+	v4l2_clk_put(priv->clk);
+	return 0;
+}
+
+static const struct i2c_device_id tw9910_id[] = {
+	{ "tw9910", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tw9910_id);
+
+static struct i2c_driver tw9910_i2c_driver = {
+	.driver = {
+		.name = "tw9910",
+	},
+	.probe    = tw9910_probe,
+	.remove   = tw9910_remove,
+	.id_table = tw9910_id,
+};
+
+module_i2c_driver(tw9910_i2c_driver);
+
+MODULE_DESCRIPTION("SoC Camera driver for tw9910");
+MODULE_AUTHOR("Kuninori Morimoto");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux