Hauppauge HVR-975 is hybrid NTSC/PAL, QAM/ATSC, and DVB-C/T/T2 usb device.
Only ATSC/QAM front end is initially active. Second frontend support is
work in progress.
CX23102 + LG3306A/Si2168(WiP) + Si2157
Changes since v1:
- removed double semicolon
Signed-off-by: Brad Love <brad@xxxxxxxxxxxxxxxx>
---
drivers/media/usb/cx231xx/cx231xx-cards.c | 42 ++++++++++++++++++
drivers/media/usb/cx231xx/cx231xx-dvb.c | 74 +++++++++++++++++++++++++++++++
drivers/media/usb/cx231xx/cx231xx.h | 1 +
3 files changed, 117 insertions(+)
diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c
index c2efbff..8582568 100644
--- a/drivers/media/usb/cx231xx/cx231xx-cards.c
+++ b/drivers/media/usb/cx231xx/cx231xx-cards.c
@@ -961,6 +961,45 @@ struct cx231xx_board cx231xx_boards[] = {
.gpio = NULL,
} },
},
+ [CX231XX_BOARD_HAUPPAUGE_975] = {
+ .name = "Hauppauge WinTV-HVR-975",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x60,
+ .tuner_gpio = RDE250_XCV_TUNER,
+ .tuner_sif_gpio = 0x05,
+ .tuner_scl_gpio = 0x1a,
+ .tuner_sda_gpio = 0x1b,
+ .decoder = CX231XX_AVDECODER,
+ .output_mode = OUT_MODE_VIP11,
+ .demod_xfer_mode = 0,
+ .ctl_pin_status_mask = 0xFFFFFFC4,
+ .agc_analog_digital_select_gpio = 0x0c,
+ .gpio_pin_status_mask = 0x4001000,
+ .tuner_i2c_master = I2C_1_MUX_3,
+ .demod_i2c_master = I2C_1_MUX_3,
+ .has_dvb = 1,
+ .demod_addr = 0x59, /* 0xb2 >> 1 */
+ .norm = V4L2_STD_ALL,
+
+ .input = {{
+ .type = CX231XX_VMUX_TELEVISION,
+ .vmux = CX231XX_VIN_3_1,
+ .amux = CX231XX_AMUX_VIDEO,
+ .gpio = NULL,
+ }, {
+ .type = CX231XX_VMUX_COMPOSITE1,
+ .vmux = CX231XX_VIN_2_1,
+ .amux = CX231XX_AMUX_LINE_IN,
+ .gpio = NULL,
+ }, {
+ .type = CX231XX_VMUX_SVIDEO,
+ .vmux = CX231XX_VIN_1_1 |
+ (CX231XX_VIN_1_2 << 8) |
+ CX25840_SVIDEO_ON,
+ .amux = CX231XX_AMUX_LINE_IN,
+ .gpio = NULL,
+ } },
+ },
};
const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
@@ -994,6 +1033,8 @@ struct usb_device_id cx231xx_id_table[] = {
.driver_info = CX231XX_BOARD_HAUPPAUGE_955Q},
{USB_DEVICE(0x2040, 0xb151),
.driver_info = CX231XX_BOARD_HAUPPAUGE_935C},
+ {USB_DEVICE(0x2040, 0xb150),
+ .driver_info = CX231XX_BOARD_HAUPPAUGE_975},
{USB_DEVICE(0x2040, 0xb130),
.driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx},
{USB_DEVICE(0x2040, 0xb131),
@@ -1253,6 +1294,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
case CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx:
case CX231XX_BOARD_HAUPPAUGE_955Q:
case CX231XX_BOARD_HAUPPAUGE_935C:
+ case CX231XX_BOARD_HAUPPAUGE_975:
{
struct eeprom {
struct tveeprom tvee;
diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c
index 2e6bb09..cb8e90a 100644
--- a/drivers/media/usb/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c
@@ -1143,6 +1143,80 @@ static int dvb_init(struct cx231xx *dev)
dev->dvb->i2c_client_tuner = client;
break;
}
+ case CX231XX_BOARD_HAUPPAUGE_975:
+ {
+ struct i2c_client *client;
+ struct i2c_adapter *adapter;
+ struct i2c_board_info info = {};
+ struct si2157_config si2157_config = {};
+ struct lgdt3306a_config lgdt3306a_config = {};
+
+ /* attach demodulator chip */
+ lgdt3306a_config = hauppauge_955q_lgdt3306a_config;
+ lgdt3306a_config.fe = &dev->dvb->frontend;
+ lgdt3306a_config.i2c_adapter = &adapter;
+
+ strlcpy(info.type, "lgdt3306a", sizeof(info.type));
+ info.addr = dev->board.demod_addr;
+ info.platform_data = &lgdt3306a_config;
+
+ request_module(info.type);
+ client = i2c_new_device(demod_i2c, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ dev_err(dev->dev,
+ "Failed to attach %s frontend.\n", info.type);
+ i2c_unregister_device(client);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dvb->i2c_client_demod = client;
+ dev->dvb->frontend->ops.i2c_gate_ctrl = NULL;
+
+ /* define general-purpose callback pointer */
+ dvb->frontend->callback = cx231xx_tuner_callback;
+
+ /* attach tuner */
+ si2157_config.fe = dev->dvb->frontend;
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ si2157_config.mdev = dev->media_dev;
+#endif
+ si2157_config.if_port = 1;
+ si2157_config.inversion = true;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = dev->board.tuner_addr;
+ info.platform_data = &si2157_config;
+ request_module("si2157");
+
+ client = i2c_new_device(tuner_i2c, &info);
+ if (client == NULL || client->dev.driver == NULL) {
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ if (!try_module_get(client->dev.driver->owner)) {
+ dev_err(dev->dev,
+ "Failed to obtain %s tuner.\n", info.type);
+ i2c_unregister_device(client);
+ module_put(dvb->i2c_client_demod->dev.driver->owner);
+ i2c_unregister_device(dvb->i2c_client_demod);
+ result = -ENODEV;
+ goto out_free;
+ }
+
+ dev->cx231xx_reset_analog_tuner = NULL;
+ dev->dvb->i2c_client_tuner = client;
+ break;
+ }
default:
dev_err(dev->dev,
"%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index 1493192..fa993f7 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -82,6 +82,7 @@
#define CX231XX_BOARD_ASTROMETA_T2HYBRID 24
#define CX231XX_BOARD_THE_IMAGING_SOURCE_DFG_USB2_PRO 25
#define CX231XX_BOARD_HAUPPAUGE_935C 26
+#define CX231XX_BOARD_HAUPPAUGE_975 27
/* Limits minimum and default number of buffers */
#define CX231XX_MIN_BUF 4
--
2.7.4
