On Wed, Jan 03, 2018 at 08:47:09AM +0000, Hugues FRUCHET wrote: > Hi Sakari, > this is fine for me to drop those two lines so sync signals become > mandatory. > Must I repost a v5 serie ? Here's the diff: diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt index e26a84646603..8e36da0d8406 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov5640.txt @@ -31,8 +31,6 @@ Endpoint node required properties for parallel connection are: or <10> for 10 bits parallel bus - data-shift: shall be set to <2> for 8 bits parallel bus (lines 9:2 are used) or <0> for 10 bits parallel bus - -Endpoint node optional properties for parallel connection are: - hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively. - vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively. - pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock -- Sakari Ailus e-mail: sakari.ailus@xxxxxx
