Yong,
On Fri, Dec 22, 2017 at 11:21 AM, Priit Laes <plaes@xxxxxxxxx> wrote:
> On Fri, Dec 22, 2017 at 05:47:00PM +0800, Yong Deng wrote:
>> Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
>> and CSI1 is used for parallel interface. This is not documented in
>> datasheet but by testing and guess.
>>
>> This patch implement a v4l2 framework driver for it.
>>
>> Currently, the driver only support the parallel interface. MIPI-CSI2,
>> ISP's support are not included in this patch.
>>
>> Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx>
<snip>
>> --- /dev/null
>> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
>> @@ -0,0 +1,878 @@
>> +/*
>> + * Copyright (c) 2017 Magewell Electronics Co., Ltd. (Nanjing).
>> + * All rights reserved.
>> + * Author: Yong Deng <yong.deng@xxxxxxxxxxxx>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
Would you mind using the new SPDX tags documented in Thomas patch set
[1] rather than this fine but longer legalese?
>> +MODULE_LICENSE("GPL v2");
Per module.h this means GPL2 only. This is not matching your top
license above which is GPL2 or later.
Please make sure your MODULE_LICENSE is consistent with the top level license.
[1] https://lkml.org/lkml/2017/12/4/934
--
Cordially
Philippe Ombredanne
