Hi,
On Tue, 19 Dec 2017 18:35:49 +0800
Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> On Mon, Nov 13, 2017 at 3:30 PM, Yong Deng <yong.deng@xxxxxxxxxxxx> wrote:
> > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> > and CSI1 is used for parallel interface. This is not documented in
> > datasheet but by testing and guess.
> >
> > This patch implement a v4l2 framework driver for it.
> >
> > Currently, the driver only support the parallel interface. MIPI-CSI2,
> > ISP's support are not included in this patch.
> >
> > Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx>
> > ---
> > drivers/media/platform/Kconfig | 1 +
> > drivers/media/platform/Makefile | 2 +
> > drivers/media/platform/sunxi/sun6i-csi/Kconfig | 9 +
> > drivers/media/platform/sunxi/sun6i-csi/Makefile | 3 +
> > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 918 +++++++++++++++++++++
> > drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h | 146 ++++
> > .../media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h | 203 +++++
> > .../media/platform/sunxi/sun6i-csi/sun6i_video.c | 722 ++++++++++++++++
> > .../media/platform/sunxi/sun6i-csi/sun6i_video.h | 61 ++
> > 9 files changed, 2065 insertions(+)
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/Kconfig
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/Makefile
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
> > create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.h
> >
>
> [...]
>
> > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
> > new file mode 100644
> > index 0000000..0cebcbd
> > --- /dev/null
> > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
>
> [...]
>
> > +/* -----------------------------------------------------------------------------
> > + * Media Operations
> > + */
> > +static int sun6i_video_formats_init(struct sun6i_video *video)
> > +{
> > + struct v4l2_subdev_mbus_code_enum mbus_code = { 0 };
> > + struct sun6i_csi *csi = video->csi;
> > + struct v4l2_format format;
> > + struct v4l2_subdev *subdev;
> > + u32 pad;
> > + const u32 *pixformats;
> > + int pixformat_count = 0;
> > + u32 subdev_codes[32]; /* subdev format codes, 32 should be enough */
> > + int codes_count = 0;
> > + int num_fmts = 0;
> > + int i, j;
> > +
> > + subdev = sun6i_video_remote_subdev(video, &pad);
> > + if (subdev == NULL)
> > + return -ENXIO;
> > +
> > + /* Get supported pixformats of CSI */
> > + pixformat_count = sun6i_csi_get_supported_pixformats(csi, &pixformats);
> > + if (pixformat_count <= 0)
> > + return -ENXIO;
> > +
> > + /* Get subdev formats codes */
> > + mbus_code.pad = pad;
> > + mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> > + while (!v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL,
> > + &mbus_code)) {
> > + if (codes_count >= ARRAY_SIZE(subdev_codes)) {
> > + dev_warn(video->csi->dev,
> > + "subdev_codes array is full!\n");
> > + break;
> > + }
> > + subdev_codes[codes_count] = mbus_code.code;
> > + codes_count++;
> > + mbus_code.index++;
> > + }
> > +
> > + if (!codes_count)
> > + return -ENXIO;
> > +
> > + /* Get supported formats count */
> > + for (i = 0; i < codes_count; i++) {
> > + for (j = 0; j < pixformat_count; j++) {
> > + if (!sun6i_csi_is_format_support(csi, pixformats[j],
> > + mbus_code.code)) {
>
> Bug here. You are testing against mbus_code.code, which would be whatever
> was leftover from the previous section. Instead you should be testing
> against subdev_codes[i], the list you just built.
>
> Without it, it won't get past this part of the code if the last enumerated
> media bus format isn't supported.
>
> > + continue;
> > + }
> > + num_fmts++;
> > + }
> > + }
> > +
> > + if (!num_fmts)
> > + return -ENXIO;
> > +
> > + video->num_formats = num_fmts;
> > + video->formats = devm_kcalloc(video->csi->dev, num_fmts,
> > + sizeof(struct sun6i_csi_format), GFP_KERNEL);
> > + if (!video->formats)
> > + return -ENOMEM;
> > +
> > + /* Get supported formats */
> > + num_fmts = 0;
> > + for (i = 0; i < codes_count; i++) {
> > + for (j = 0; j < pixformat_count; j++) {
> > + if (!sun6i_csi_is_format_support(csi, pixformats[j],
> > + mbus_code.code)) {
>
> Same here.
>
> This gets me past the enumeration part of things...
>
> > + continue;
> > + }
> > +
> > + video->formats[num_fmts].fourcc = pixformats[j];
> > + video->formats[num_fmts].mbus_code =
> > + mbus_code.code;
> > + video->formats[num_fmts].bpp =
> > + v4l2_pixformat_get_bpp(pixformats[j]);
> > + num_fmts++;
> > + }
> > + }
> > +
> > + /* setup default format */
> > + format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > + format.fmt.pix.width = 1280;
> > + format.fmt.pix.height = 720;
> > + format.fmt.pix.pixelformat = video->formats[0].fourcc;
> > + sun6i_video_set_fmt(video, &format);
>
> But my system crashes here within the OV5640 driver.
> So no tests about the actual functionality. This was on the Bananapi M3,
> which has an A83T SoC.
>
>
> In general I think you should make your driver much more noisy than it
> currently is. I spent the whole afternoon adding error messages and
> debug traces to narrow down the issue.
Sorry for making such a simple mistake.
>
> ChenYu
Thanks,
Yong
