HI Kieran, Thanks for your comments. On 2017-12-14 23:16:08 +0000, Kieran Bingham wrote: > Hi Niklas, > > On 14/12/17 19:08, Niklas Söderlund wrote: > > The driver is now pad and stream aware, only allow to get/set format on > > sink pads. > > Ok - I can see the patch is doing this ... > > > Also record a different format for each sink pad since it's > > no longer true that they are all the same > > But I can't see how the patch is doing this ^ ? > > What have I missed? I have missed moving this commit message to another patch when moving code around :-) Thanks for noticing. Will fix this for next version. > > -- > Kieran > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> > > --- > > drivers/media/i2c/adv748x/adv748x-csi2.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c > > index 39f993282dd3bb5c..291b35bef49d41fb 100644 > > --- a/drivers/media/i2c/adv748x/adv748x-csi2.c > > +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c > > @@ -176,6 +176,9 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd, > > struct adv748x_state *state = tx->state; > > struct v4l2_mbus_framefmt *mbusformat; > > > > + if (sdformat->pad != ADV748X_CSI2_SINK) > > + return -EINVAL; > > + > > mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad, > > sdformat->which); > > if (!mbusformat) > > @@ -199,6 +202,9 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd, > > struct v4l2_mbus_framefmt *mbusformat; > > int ret = 0; > > > > + if (sdformat->pad != ADV748X_CSI2_SINK) > > + return -EINVAL; > > + > > mbusformat = adv748x_csi2_get_pad_format(sd, cfg, sdformat->pad, > > sdformat->which); > > if (!mbusformat) > > -- Regards, Niklas Söderlund
