Hi Jacopo,
On Sun, Dec 17, 2017 at 05:42:54PM +0100, jacopo mondi wrote:
> Hi Sakari,
>
> On Fri, Dec 15, 2017 at 06:17:04PM +0200, Sakari Ailus wrote:
> > Hi Jacopo,
> >
> > On Wed, Dec 13, 2017 at 07:26:20PM +0100, Jacopo Mondi wrote:
> > > The v4l2-async module operations are quite complex to follow, due to the
> > > asynchronous nature of subdevices and notifiers registration and
> > > matching procedures. In order to help with debugging of failed or
> > > erroneous matching between a subdevice and the notifier collected
> > > async_subdevice it gets matched against, introduce a few dev_dbg() calls
> > > in v4l2_async core operations.
> > >
> > > Protect the debug operations with a Kconfig defined symbol, to make sure
> > > when debugging is disabled, no additional code or data is added to the
> > > module.
> > >
> > > Notifiers are identified by the name of the subdevice or v4l2_dev they are
> > > registered by, while subdevice matching which now happens on endpoints,
> > > need a longer description built walking the fwnode graph backwards
> > > collecting parent nodes names (otherwise we would have had printouts
> > > like: "Matching "endpoint" with "endpoint"" which are not that useful).
> > >
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > >
> > > ---
> > > For fwnodes backed by OF, I may have used the "%pOF" format modifier to
> > > get the full node name instead of parsing the fwnode graph by myself with
> > > "v4l2_async_fwnode_full_name()". Unfortunately I'm not aware of anything
> > > like "%pOF" for ACPI backed fwnodes. Also, walking the fwnode graph by
> > > myself allows me to reduce the depth, to reduce the debug messages output
> > > length which is anyway long enough to result disturbing on a 80columns
> > > terminal window.
> >
> > ACPI doesn't have such at the moment. I think printing the full path would
> > still be better. There isn't that much more to print after all.
>
> So you suggest to just use the full node name for OF. What about ACPI?
>
> From your other reply I got that I can print the single node name for
> "device ACPI nodes" but not for "non-device ACPI nodes". Should I build
> the full device name in drivers/acpi/properties.c for ACPI devices
> like I'm doing here for fwnodes?
What I think would be nice was that ACPI would receive similar way to print
node names (as well as other information) as OF has, through printk.
I don't demand that to get the patchset in though, I'm fine if this is
limited to OF right now. It's debug info, after all that I've at least
personally been fine without.
>
> >
> > > ---
> > >
> > > drivers/media/v4l2-core/Kconfig | 8 ++++
> > > drivers/media/v4l2-core/v4l2-async.c | 81 ++++++++++++++++++++++++++++++++++++
> > > 2 files changed, 89 insertions(+)
> > >
> > > diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig
> > > index a35c336..8331736 100644
> > > --- a/drivers/media/v4l2-core/Kconfig
> > > +++ b/drivers/media/v4l2-core/Kconfig
> > > @@ -17,6 +17,14 @@ config VIDEO_ADV_DEBUG
> > > V4L devices.
> > > In doubt, say N.
> > >
> > > +config VIDEO_V4L2_ASYNC_DEBUG
> > > + bool "Enable debug functionalities for V4L2 async module"
> > > + depends on VIDEO_V4L2
> >
> > I'm not sure I'd add a Kconfig option. This is adding a fairly simple
> > function only to the kernel.
>
> So I will use a symbol defined in the module to enable/disable debug
> (maybe the "DEBUG" symbol itself?)
Dynamic debug can be enabled via the user space interface or the kernel
command line, I think that should be enough.
>
> >
> > > + default n
> > > + ---help---
> > > + Say Y here to enable debug output in V4L2 async module.
> > > + In doubt, say N.
> > > +
> > > config VIDEO_FIXED_MINOR_RANGES
> > > bool "Enable old-style fixed minor ranges on drivers/video devices"
> > > default n
> > > diff --git a/drivers/media/v4l2-core/v4l2-async.c b/drivers/media/v4l2-core/v4l2-async.c
> > > index c13a781..307e1a5 100644
> > > --- a/drivers/media/v4l2-core/v4l2-async.c
> > > +++ b/drivers/media/v4l2-core/v4l2-async.c
> > > @@ -8,6 +8,10 @@
> > > * published by the Free Software Foundation.
> > > */
> > >
> > > +#if defined(CONFIG_VIDEO_V4L2_ASYNC_DEBUG)
> > > +#define DEBUG
> >
> > Do you need this?
>
> No dev_dbg() otherwise, isn't it?
Yes. With dynamic debug.
>
> >
> > > +#endif
> > > +
> > > #include <linux/device.h>
> > > #include <linux/err.h>
> > > #include <linux/i2c.h>
> > > @@ -25,6 +29,52 @@
> > > #include <media/v4l2-fwnode.h>
> > > #include <media/v4l2-subdev.h>
> > >
> > > +#if defined(CONFIG_VIDEO_V4L2_ASYNC_DEBUG)
> > > +#define V4L2_ASYNC_FWNODE_NAME_LEN 512
> > > +
> > > +static void __v4l2_async_fwnode_full_name(char *name,
> > > + unsigned int len,
> > > + unsigned int max_depth,
> > > + struct fwnode_handle *fwnode)
> > > +{
> > > + unsigned int buf_len = len < V4L2_ASYNC_FWNODE_NAME_LEN ?
> > > + len : V4L2_ASYNC_FWNODE_NAME_LEN;
> > > + char __tmp[V4L2_ASYNC_FWNODE_NAME_LEN];
> >
> > That's a bit too much to allocate from the stack I think.
>
> For an full name do you think 128 is enough? 256 maybe?
I think it'd be nicer if you could print the information without using a
buffer.
--
Kind regards,
Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx
