[PATCH/RFC v2 07/15] rcar-csi2: use frame description information to configure CSI-2 bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The driver now have access to frame descriptor information, use it. Only
enable the virtual channels which are described in the frame descriptor
and calculate the link based on all enabled streams.

With multiplexed stream support it's now possible to have different
formats on the different source pads. Make source formats independent
off each other and disallowing a format on the multiplexed sink.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
 drivers/media/platform/rcar-vin/rcar-csi2.c | 112 ++++++++++++++--------------
 1 file changed, 58 insertions(+), 54 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index 6b607b2e31e26063..2dd7d03d622d5510 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -296,24 +296,22 @@ static const struct phtw_testdin_data testdin_data_v3m_e3[] = {
 #define CSI0CLKFREQRANGE(n)		((n & 0x3f) << 16)
 
 struct rcar_csi2_format {
-	unsigned int code;
 	unsigned int datatype;
 	unsigned int bpp;
 };
 
 static const struct rcar_csi2_format rcar_csi2_formats[] = {
-	{ .code = MEDIA_BUS_FMT_RGB888_1X24,	.datatype = 0x24, .bpp = 24 },
-	{ .code = MEDIA_BUS_FMT_UYVY8_1X16,	.datatype = 0x1e, .bpp = 16 },
-	{ .code = MEDIA_BUS_FMT_UYVY8_2X8,	.datatype = 0x1e, .bpp = 16 },
-	{ .code = MEDIA_BUS_FMT_YUYV10_2X10,	.datatype = 0x1e, .bpp = 16 },
+	{ .datatype = 0x1e, .bpp = 16 },
+	{ .datatype = 0x24, .bpp = 24 },
 };
 
-static const struct rcar_csi2_format *rcar_csi2_code_to_fmt(unsigned int code)
+static const struct rcar_csi2_format
+*rcar_csi2_datatype_to_fmt(unsigned int datatype)
 {
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(rcar_csi2_formats); i++)
-		if (rcar_csi2_formats[i].code == code)
+		if (rcar_csi2_formats[i].datatype == datatype)
 			return rcar_csi2_formats + i;
 
 	return NULL;
@@ -355,7 +353,7 @@ struct rcar_csi2 {
 	struct v4l2_async_notifier notifier;
 	struct v4l2_async_subdev remote;
 
-	struct v4l2_mbus_framefmt mf;
+	struct v4l2_mbus_framefmt mf[4];
 
 	struct mutex lock;
 	int stream_count[4];
@@ -411,25 +409,14 @@ static int rcar_csi2_wait_phy_start(struct rcar_csi2 *priv)
 	return -ETIMEDOUT;
 }
 
-static int rcar_csi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
+static int rcar_csi2_calc_mbps(struct rcar_csi2 *priv,
+			       struct v4l2_subdev *source,
+			       struct v4l2_mbus_frame_desc *fd)
 {
-	struct media_pad *pad, *source_pad;
-	struct v4l2_subdev *source = NULL;
 	struct v4l2_ctrl *ctrl;
+	unsigned int i, bpp = 0;
 	u64 mbps;
 
-	/* Get remote subdevice */
-	pad = &priv->subdev.entity.pads[RCAR_CSI2_SINK];
-	source_pad = media_entity_remote_pad(pad);
-	if (!source_pad) {
-		dev_err(priv->dev, "Could not find remote source pad\n");
-		return -ENODEV;
-	}
-	source = media_entity_to_v4l2_subdev(source_pad->entity);
-
-	dev_dbg(priv->dev, "Using source %s pad: %u\n", source->name,
-		source_pad->index);
-
 	/* Read the pixel rate control from remote */
 	ctrl = v4l2_ctrl_find(source->ctrl_handler, V4L2_CID_PIXEL_RATE);
 	if (!ctrl) {
@@ -438,6 +425,21 @@ static int rcar_csi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
 		return -EINVAL;
 	}
 
+	/* Calculate total bpp */
+	for (i = 0; i < fd->num_entries; i++) {
+		const struct rcar_csi2_format *format;
+
+		format = rcar_csi2_datatype_to_fmt(
+					fd->entry[i].bus.csi2.data_type);
+		if (!format) {
+			dev_err(priv->dev, "Unknown data type: %d\n",
+				fd->entry[i].bus.csi2.data_type);
+			return -EINVAL;
+		}
+
+		bpp += format->bpp;
+	}
+
 	/* Calculate the phypll */
 	mbps = v4l2_ctrl_g_ctrl_int64(ctrl) * bpp;
 	do_div(mbps, priv->lanes * 1000000);
@@ -489,39 +491,33 @@ static int rcar_csi2_set_phtw(struct rcar_csi2 *priv, unsigned int mbps)
 	return 0;
 }
 
-static int rcar_csi2_start(struct rcar_csi2 *priv)
+static int rcar_csi2_start(struct rcar_csi2 *priv, struct v4l2_subdev *source,
+			   struct v4l2_mbus_frame_desc *fd)
 {
-	const struct rcar_csi2_format *format;
-	u32 phycnt, tmp;
-	u32 vcdt = 0, vcdt2 = 0;
+	u32 phycnt, vcdt = 0, vcdt2 = 0;
 	unsigned int i;
 	int mbps, ret;
 
-	dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
-		priv->mf.width, priv->mf.height,
-		priv->mf.field == V4L2_FIELD_NONE ? 'p' : 'i');
-
-	/* Code is validated in set_ftm */
-	format = rcar_csi2_code_to_fmt(priv->mf.code);
+	for (i = 0; i < fd->num_entries; i++) {
+		struct v4l2_mbus_frame_desc_entry *entry = &fd->entry[i];
+		u32 tmp;
 
-	/*
-	 * Enable all Virtual Channels
-	 *
-	 * NOTE: It's not possible to get individual datatype for each
-	 *       source virtual channel. Once this is possible in V4L2
-	 *       it should be used here.
-	 */
-	for (i = 0; i < 4; i++) {
-		tmp = VCDT_SEL_VC(i) | VCDT_VCDTN_EN | VCDT_SEL_DTN_ON |
-			VCDT_SEL_DT(format->datatype);
+		tmp = VCDT_SEL_VC(entry->bus.csi2.channel) | VCDT_VCDTN_EN |
+			VCDT_SEL_DTN_ON |
+			VCDT_SEL_DT(entry->bus.csi2.data_type);
 
 		/* Store in correct reg and offset */
-		if (i < 2)
-			vcdt |= tmp << ((i % 2) * 16);
+		if (entry->bus.csi2.channel < 2)
+			vcdt |= tmp << ((entry->bus.csi2.channel % 2) * 16);
 		else
-			vcdt2 |= tmp << ((i % 2) * 16);
+			vcdt2 |= tmp << ((entry->bus.csi2.channel % 2) * 16);
+
+		dev_dbg(priv->dev, "VC%d datatype: 0x%x\n",
+			entry->bus.csi2.channel, entry->bus.csi2.data_type);
 	}
 
+	dev_dbg(priv->dev, "VCDT: 0x%08x VCDT2: 0x%08x\n", vcdt, vcdt2);
+
 	switch (priv->lanes) {
 	case 1:
 		phycnt = PHYCNT_ENABLECLK | PHYCNT_ENABLE_0;
@@ -537,7 +533,7 @@ static int rcar_csi2_start(struct rcar_csi2 *priv)
 		return -EINVAL;
 	}
 
-	mbps = rcar_csi2_calc_mbps(priv, format->bpp);
+	mbps = rcar_csi2_calc_mbps(priv, source, fd);
 	if (mbps < 0)
 		return mbps;
 
@@ -686,7 +682,7 @@ static int rcar_csi2_s_stream(struct v4l2_subdev *sd, unsigned int pad,
 	if (enable && count == 0) {
 		pm_runtime_get_sync(priv->dev);
 
-		ret = rcar_csi2_start(priv);
+		ret = rcar_csi2_start(priv, nextsd, &fd);
 		if (ret) {
 			pm_runtime_put(priv->dev);
 			goto out;
@@ -720,14 +716,16 @@ static int rcar_csi2_set_pad_format(struct v4l2_subdev *sd,
 {
 	struct rcar_csi2 *priv = sd_to_csi2(sd);
 	struct v4l2_mbus_framefmt *framefmt;
+	int vc;
 
-	if (!rcar_csi2_code_to_fmt(format->format.code))
-		return -EINVAL;
+	vc = rcar_csi2_pad_to_vc(format->pad);
+	if (vc < 0)
+		return vc;
 
 	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		priv->mf = format->format;
+		priv->mf[vc] = format->format;
 	} else {
-		framefmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+		framefmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
 		*framefmt = format->format;
 	}
 
@@ -739,11 +737,17 @@ static int rcar_csi2_get_pad_format(struct v4l2_subdev *sd,
 				    struct v4l2_subdev_format *format)
 {
 	struct rcar_csi2 *priv = sd_to_csi2(sd);
+	int vc;
+
+	vc = rcar_csi2_pad_to_vc(format->pad);
+	if (vc < 0)
+		return vc;
 
 	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		format->format = priv->mf;
+		format->format = priv->mf[vc];
 	else
-		format->format = *v4l2_subdev_get_try_format(sd, cfg, 0);
+		format->format = *v4l2_subdev_get_try_format(sd, cfg,
+							     format->pad);
 
 	return 0;
 }
-- 
2.15.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux