Several comments are wrongly tagged as kernel-doc, causing
those warnings:
drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand *
on line 652 - I thought it was a doc line
drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module.
on line 301 - I thought it was a doc line
drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration
on line 432 - I thought it was a doc line
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame
on line 150 - I thought it was a doc line
drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size
on line 356 - I thought it was a doc line
drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size
on line 369 - I thought it was a doc line
drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer
on line 395 - I thought it was a doc line
drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/dvb-frontends/sp887x.c | 6 +++---
drivers/media/dvb-frontends/tua6100.c | 2 +-
drivers/media/dvb-frontends/zl10036.c | 8 ++++----
drivers/media/i2c/ov5647.c | 4 ++--
drivers/media/pci/solo6x10/solo6x10-enc.c | 2 +-
drivers/media/platform/rcar_fdp1.c | 2 +-
drivers/media/platform/sh_veu.c | 2 +-
drivers/media/platform/sti/hva/hva-h264.c | 18 +++++++++++++-----
drivers/media/platform/ti-vpe/vpe.c | 2 +-
drivers/media/platform/vim2m.c | 2 +-
drivers/media/rc/st_rc.c | 6 +++---
drivers/media/rc/streamzap.c | 6 +++---
drivers/media/usb/dvb-usb/cinergyT2-fe.c | 2 +-
drivers/media/usb/dvb-usb/dib0700_devices.c | 8 ++++----
drivers/media/usb/dvb-usb/friio-fe.c | 2 +-
drivers/media/usb/dvb-usb/friio.c | 2 +-
drivers/media/usb/gspca/ov519.c | 2 +-
drivers/media/usb/pwc/pwc-dec23.c | 7 +++----
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 6 +++---
19 files changed, 48 insertions(+), 41 deletions(-)
diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c
index 7c511c3cd4ca..d2c402b52c6e 100644
--- a/drivers/media/dvb-frontends/sp887x.c
+++ b/drivers/media/dvb-frontends/sp887x.c
@@ -57,7 +57,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
int ret;
if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
- /**
+ /*
* in case of soft reset we ignore ACK errors...
*/
if (!(reg == 0xf1a && data == 0x000 &&
@@ -130,7 +130,7 @@ static void sp887x_setup_agc (struct sp887x_state* state)
#define BLOCKSIZE 30
#define FW_SIZE 0x4000
-/**
+/*
* load firmware and setup MPEG interface...
*/
static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
@@ -279,7 +279,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
return 0;
}
-/**
+/*
* estimates division of two 24bit numbers,
* derived from the ves1820/stv0299 driver code
*/
diff --git a/drivers/media/dvb-frontends/tua6100.c b/drivers/media/dvb-frontends/tua6100.c
index 18e6d4c5be21..1d41abd47f04 100644
--- a/drivers/media/dvb-frontends/tua6100.c
+++ b/drivers/media/dvb-frontends/tua6100.c
@@ -1,4 +1,4 @@
-/**
+/*
* Driver for Infineon tua6100 pll.
*
* (c) 2006 Andrew de Quincey
diff --git a/drivers/media/dvb-frontends/zl10036.c b/drivers/media/dvb-frontends/zl10036.c
index 062282739ce5..89dd65ae88ad 100644
--- a/drivers/media/dvb-frontends/zl10036.c
+++ b/drivers/media/dvb-frontends/zl10036.c
@@ -1,4 +1,4 @@
-/**
+/*
* Driver for Zarlink zl10036 DVB-S silicon tuner
*
* Copyright (C) 2006 Tino Reichardt
@@ -157,7 +157,7 @@ static int zl10036_sleep(struct dvb_frontend *fe)
return ret;
}
-/**
+/*
* register map of the ZL10036/ZL10038
*
* reg[default] content
@@ -219,7 +219,7 @@ static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
if (fbw <= 28820) {
br = _BR_MAXIMUM;
} else {
- /**
+ /*
* f(bw)=34,6MHz f(xtal)=10.111MHz
* br = (10111/34600) * 63 * 1/K = 14;
*/
@@ -315,7 +315,7 @@ static int zl10036_set_params(struct dvb_frontend *fe)
|| (frequency > fe->ops.info.frequency_max))
return -EINVAL;
- /**
+ /*
* alpha = 1.35 for dvb-s
* fBW = (alpha*symbolrate)/(2*0.8)
* 1.35 / (2*0.8) = 27 / 32
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 34179d232a35..da39c49de503 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -428,8 +428,8 @@ static int ov5647_sensor_set_register(struct v4l2_subdev *sd,
}
#endif
-/**
- * @short Subdev core operations registration
+/*
+ * Subdev core operations registration
*/
static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = {
.s_power = ov5647_sensor_power,
diff --git a/drivers/media/pci/solo6x10/solo6x10-enc.c b/drivers/media/pci/solo6x10/solo6x10-enc.c
index d28211bb9674..58d6b5131dd0 100644
--- a/drivers/media/pci/solo6x10/solo6x10-enc.c
+++ b/drivers/media/pci/solo6x10/solo6x10-enc.c
@@ -175,7 +175,7 @@ int solo_osd_print(struct solo_enc_dev *solo_enc)
return 0;
}
-/**
+/*
* Set channel Quality Profile (0-3).
*/
void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,
diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c
index 3245bc45f4a0..b13dec3081e5 100644
--- a/drivers/media/platform/rcar_fdp1.c
+++ b/drivers/media/platform/rcar_fdp1.c
@@ -1132,7 +1132,7 @@ static int fdp1_device_process(struct fdp1_ctx *ctx)
* mem2mem callbacks
*/
-/**
+/*
* job_ready() - check whether an instance is ready to be scheduled to run
*/
static int fdp1_m2m_job_ready(void *priv)
diff --git a/drivers/media/platform/sh_veu.c b/drivers/media/platform/sh_veu.c
index 15a562af13c7..dedc1b024f6f 100644
--- a/drivers/media/platform/sh_veu.c
+++ b/drivers/media/platform/sh_veu.c
@@ -267,7 +267,7 @@ static void sh_veu_process(struct sh_veu_dev *veu,
sh_veu_reg_write(veu, VEU_EIER, 1); /* enable interrupt in VEU */
}
-/**
+/*
* sh_veu_device_run() - prepares and starts the device
*
* This will be called by the framework when it decides to schedule a particular
diff --git a/drivers/media/platform/sti/hva/hva-h264.c b/drivers/media/platform/sti/hva/hva-h264.c
index a7e5eed17ada..17f1eb0ba957 100644
--- a/drivers/media/platform/sti/hva/hva-h264.c
+++ b/drivers/media/platform/sti/hva/hva-h264.c
@@ -134,7 +134,7 @@ enum hva_h264_sei_payload_type {
SEI_FRAME_PACKING_ARRANGEMENT = 45
};
-/**
+/*
* stereo Video Info struct
*/
struct hva_h264_stereo_video_sei {
@@ -146,7 +146,9 @@ struct hva_h264_stereo_video_sei {
u8 right_view_self_contained_flag;
};
-/**
+/*
+ * struct hva_h264_td
+ *
* @frame_width: width in pixels of the buffer containing the input frame
* @frame_height: height in pixels of the buffer containing the input frame
* @frame_num: the parameter to be written in the slice header
@@ -352,7 +354,9 @@ struct hva_h264_td {
u32 addr_brc_in_out_parameter;
};
-/**
+/*
+ * struct hva_h264_slice_po
+ *
* @ slice_size: slice size
* @ slice_start_time: start time
* @ slice_stop_time: stop time
@@ -365,7 +369,9 @@ struct hva_h264_slice_po {
u32 slice_num;
};
-/**
+/*
+ * struct hva_h264_po
+ *
* @ bitstream_size: bitstream size
* @ dct_bitstream_size: dtc bitstream size
* @ stuffing_bits: number of stuffing bits inserted by the encoder
@@ -391,7 +397,9 @@ struct hva_h264_task {
struct hva_h264_po po;
};
-/**
+/*
+ * struct hva_h264_ctx
+ *
* @seq_info: sequence information buffer
* @ref_frame: reference frame buffer
* @rec_frame: reconstructed frame buffer
diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
index 45bd10544189..e395aa85c8ad 100644
--- a/drivers/media/platform/ti-vpe/vpe.c
+++ b/drivers/media/platform/ti-vpe/vpe.c
@@ -926,7 +926,7 @@ static struct vpe_ctx *file2ctx(struct file *file)
* mem2mem callbacks
*/
-/**
+/*
* job_ready() - check whether an instance is ready to be scheduled to run
*/
static int job_ready(void *priv)
diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c
index 7bf9fa2f8534..065483e62db4 100644
--- a/drivers/media/platform/vim2m.c
+++ b/drivers/media/platform/vim2m.c
@@ -343,7 +343,7 @@ static void schedule_irq(struct vim2m_dev *dev, int msec_timeout)
* mem2mem callbacks
*/
-/**
+/*
* job_ready() - check whether an instance is ready to be scheduled to run
*/
static int job_ready(void *priv)
diff --git a/drivers/media/rc/st_rc.c b/drivers/media/rc/st_rc.c
index a8e39c635f34..d2efd7b2c3bc 100644
--- a/drivers/media/rc/st_rc.c
+++ b/drivers/media/rc/st_rc.c
@@ -49,7 +49,7 @@ struct st_rc_device {
#define IRB_RX_NOISE_SUPPR 0x5c /* noise suppression */
#define IRB_RX_POLARITY_INV 0x68 /* polarity inverter */
-/**
+/*
* IRQ set: Enable full FIFO 1 -> bit 3;
* Enable overrun IRQ 1 -> bit 2;
* Enable last symbol IRQ 1 -> bit 1:
@@ -72,7 +72,7 @@ static void st_rc_send_lirc_timeout(struct rc_dev *rdev)
ir_raw_event_store(rdev, &ev);
}
-/**
+/*
* RX graphical example to better understand the difference between ST IR block
* output and standard definition used by LIRC (and most of the world!)
*
@@ -317,7 +317,7 @@ static int st_rc_probe(struct platform_device *pdev)
device_init_wakeup(dev, true);
dev_pm_set_wake_irq(dev, rc_dev->irq);
- /**
+ /*
* for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW
* lircd expects a long space first before a signal train to sync.
*/
diff --git a/drivers/media/rc/streamzap.c b/drivers/media/rc/streamzap.c
index 4eebfcfc10f3..c9a70fda88a8 100644
--- a/drivers/media/rc/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -191,7 +191,7 @@ static void sz_push_half_space(struct streamzap_ir *sz,
sz_push_full_space(sz, value & SZ_SPACE_MASK);
}
-/**
+/*
* streamzap_callback - usb IRQ handler callback
*
* This procedure is invoked on reception of data from
@@ -321,7 +321,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
return NULL;
}
-/**
+/*
* streamzap_probe
*
* Called by usb-core to associated with a candidate device
@@ -450,7 +450,7 @@ static int streamzap_probe(struct usb_interface *intf,
return retval;
}
-/**
+/*
* streamzap_disconnect
*
* Called by the usb core when the device is removed from the system.
diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index f9772ad0a2a5..5a2f81311fb7 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -26,7 +26,7 @@
#include "cinergyT2.h"
-/**
+/*
* convert linux-dvb frontend parameter set into TPS.
* See ETSI ETS-300744, section 4.6.2, table 9 for details.
*
diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c
index 92098c1b78e5..366b05529915 100644
--- a/drivers/media/usb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/usb/dvb-usb/dib0700_devices.c
@@ -1677,10 +1677,10 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
return -EINVAL;
}
- /** Update PLL if needed ratio **/
+ /* Update PLL if needed ratio */
state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
- /** Get optimize PLL ratio to remove spurious **/
+ /* Get optimize PLL ratio to remove spurious */
pll_ratio = dib8090_compute_pll_parameters(fe);
if (pll_ratio == 17)
timf = 21387946;
@@ -1691,7 +1691,7 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
else
timf = 18179756;
- /** Update ratio **/
+ /* Update ratio */
state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
@@ -3357,7 +3357,7 @@ static int novatd_sleep_override(struct dvb_frontend* fe)
return state->sleep(fe);
}
-/**
+/*
* novatd_frontend_attach - Nova-TD specific attach
*
* Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index 41261317bd5c..b6046e0e07f6 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -297,7 +297,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
}
-/**
+/*
* (reg, val) commad list to initialize this module.
* captured on a Windows box.
*/
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 62abe6c43a32..16875945e662 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -21,7 +21,7 @@ MODULE_PARM_DESC(debug,
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-/**
+/*
* Indirect I2C access to the PLL via FE.
* whole I2C protocol data to the PLL is sent via the FE's I2C register.
* This is done by a control msg to the FE with the I2C data accompanied, and
diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
index f1537daf4e2e..1b30434b72ef 100644
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -1,4 +1,4 @@
-/**
+/*
* OV519 driver
*
* Copyright (C) 2008-2011 Jean-François Moine <moinejf@xxxxxxx>
diff --git a/drivers/media/usb/pwc/pwc-dec23.c b/drivers/media/usb/pwc/pwc-dec23.c
index 3792fedff951..1283b3bd9800 100644
--- a/drivers/media/usb/pwc/pwc-dec23.c
+++ b/drivers/media/usb/pwc/pwc-dec23.c
@@ -649,11 +649,10 @@ static void DecompressBand23(struct pwc_dec23_private *pdec,
}
/**
- *
* Uncompress a pwc23 buffer.
- *
- * src: raw data
- * dst: image output
+ * @pdev: pointer to pwc device's internal struct
+ * @src: raw data
+ * @dst: image output
*/
void pwc_dec23_decompress(struct pwc_device *pdev,
const void *src,
diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
index b842f367249f..a142b9dc0feb 100644
--- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
@@ -76,7 +76,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define TTUSB_REV_2_2 0x22
#define TTUSB_BUDGET_NAME "ttusb_stc_fw"
-/**
+/*
* since we're casting (struct ttusb*) <-> (struct dvb_demux*) around
* the dvb_demux field must be the first in struct!!
*/
@@ -713,7 +713,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
}
}
- /**
+ /*
* if length is valid and we reached the end:
* goto next muxpack
*/
@@ -729,7 +729,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
/* maximum bytes, until we know the length */
ttusb->muxpack_len = 2;
- /**
+ /*
* no muxpacks left?
* return to search-sync state
*/
--
2.14.3
