Thanks for review Sakari,
On 11/24/2017 03:09 PM, Sakari Ailus wrote:
> Hi Hugues,
>
> On Thu, Nov 16, 2017 at 02:41:42PM +0100, Hugues Fruchet wrote:
>> Add RGB565 (LE & BE) and YUV422 YUYV format in addition
>> to existing YUV422 UYVY format.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
>> ---
>> drivers/media/i2c/ov5640.c | 79 +++++++++++++++++++++++++++++++++++++++++-----
>> 1 file changed, 71 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
>> index fb519ad..086a451 100644
>> --- a/drivers/media/i2c/ov5640.c
>> +++ b/drivers/media/i2c/ov5640.c
>> @@ -77,8 +77,10 @@
>> #define OV5640_REG_HZ5060_CTRL01 0x3c01
>> #define OV5640_REG_SIGMADELTA_CTRL0C 0x3c0c
>> #define OV5640_REG_FRAME_CTRL01 0x4202
>> +#define OV5640_REG_FORMAT_CONTROL00 0x4300
>> #define OV5640_REG_MIPI_CTRL00 0x4800
>> #define OV5640_REG_DEBUG_MODE 0x4814
>> +#define OV5640_REG_ISP_FORMAT_MUX_CTRL 0x501f
>> #define OV5640_REG_PRE_ISP_TEST_SET1 0x503d
>> #define OV5640_REG_SDE_CTRL0 0x5580
>> #define OV5640_REG_SDE_CTRL1 0x5581
>> @@ -106,6 +108,18 @@ enum ov5640_frame_rate {
>> OV5640_NUM_FRAMERATES,
>> };
>>
>> +struct ov5640_pixfmt {
>> + u32 code;
>> + u32 colorspace;
>> +};
>> +
>> +static const struct ov5640_pixfmt ov5640_formats[] = {
>> + { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_SRGB, },
>> + { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
>> + { MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
>> + { MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
>> +};
>> +
>> /*
>> * FIXME: remove this when a subdev API becomes available
>> * to set the MIPI CSI-2 virtual channel.
>> @@ -1798,17 +1812,23 @@ static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
>> {
>> struct ov5640_dev *sensor = to_ov5640_dev(sd);
>> const struct ov5640_mode_info *mode;
>> + int i;
>>
>> mode = ov5640_find_mode(sensor, fr, fmt->width, fmt->height, true);
>> if (!mode)
>> return -EINVAL;
>> -
>> fmt->width = mode->width;
>> fmt->height = mode->height;
>> - fmt->code = sensor->fmt.code;
>>
>> if (new_mode)
>> *new_mode = mode;
>> +
>> + for (i = 0; i < ARRAY_SIZE(ov5640_formats); i++)
>> + if (ov5640_formats[i].code == fmt->code)
>> + break;
>> + if (i >= ARRAY_SIZE(ov5640_formats))
>> + fmt->code = ov5640_formats[0].code;
>> +
>> return 0;
>> }
>>
>> @@ -1851,6 +1871,49 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>> return ret;
>> }
>>
>> +static int ov5640_set_framefmt(struct ov5640_dev *sensor,
>> + struct v4l2_mbus_framefmt *format)
>> +{
>> + int ret = 0;
>> + bool is_rgb = false;
>> + u8 val;
>> +
>> + switch (format->code) {
>> + case MEDIA_BUS_FMT_UYVY8_2X8:
>> + /* YUV422, UYVY */
>> + val = 0x3f;
>> + break;
>> + case MEDIA_BUS_FMT_YUYV8_2X8:
>> + /* YUV422, YUYV */
>> + val = 0x30;
>> + break;
>> + case MEDIA_BUS_FMT_RGB565_2X8_LE:
>> + /* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
>> + val = 0x6F;
>> + is_rgb = true;
>> + break;
>> + case MEDIA_BUS_FMT_RGB565_2X8_BE:
>> + /* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */
>> + val = 0x61;
>> + is_rgb = true;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + /* FORMAT CONTROL00: YUV and RGB formatting */
>> + ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00, val);
>> + if (ret)
>> + return ret;
>> +
>> + /* FORMAT MUX CONTROL: ISP YUV or RGB */
>> + ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL,
>> + is_rgb ? 0x01 : 0x00);
>
> return ov5640...;
>
OK.
>> + if (ret)
>> + return ret;
>> +
>> + return ret;
>> +}
>>
>> /*
>> * Sensor Controls.
>> @@ -2236,15 +2299,12 @@ static int ov5640_enum_mbus_code(struct v4l2_subdev *sd,
>> struct v4l2_subdev_pad_config *cfg,
>> struct v4l2_subdev_mbus_code_enum *code)
>> {
>> - struct ov5640_dev *sensor = to_ov5640_dev(sd);
>> -
>> if (code->pad != 0)
>> return -EINVAL;
>> - if (code->index != 0)
>> + if (code->index >= ARRAY_SIZE(ov5640_formats))
>> return -EINVAL;
>>
>> - code->code = sensor->fmt.code;
>> -
>> + code->code = ov5640_formats[code->index].code;
>> return 0;
>> }
>>
>> @@ -2254,12 +2314,15 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
>> int ret = 0;
>>
>> mutex_lock(&sensor->lock);
>> -
>
> I rather liked this newline!
>
OK.
>> if (sensor->streaming == !enable) {
>> if (enable && sensor->pending_mode_change) {
>> ret = ov5640_set_mode(sensor, sensor->current_mode);
>> if (ret)
>> goto out;
>> +
>> + ret = ov5640_set_framefmt(sensor, &sensor->fmt);
>> + if (ret)
>> + goto out;
>> }
>>
>> if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
>
