On Thu, Nov 09, 2017 at 10:45:34AM -0800, Tim Harvey wrote: > Add support for the TDA1997x HDMI receivers. > > Cc: Hans Verkuil <hverkuil@xxxxxxxxx> > Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> > --- > v3: > - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros > - fixed missing break > - use only hdmi_infoframe_log for infoframe logging > - simplify tda1997x_s_stream error handling > - add delayed work proc to handle hotplug enable/disable > - fix set_edid (disable HPD before writing, enable after) > - remove enabling edid by default > - initialize timings > - take quant range into account in colorspace conversion > - remove vendor/product tracking (we provide this in log_status via infoframes) > - add v4l_controls > - add more detail to log_status > - calculate vhref generator timings > - timing detection fixes (rounding errors, hswidth errors) > - rename configure_input/configure_conv functions > > v2: > - implement dv timings enum/cap > - remove deprecated g_mbus_config op > - fix dv_query_timings > - add EDID get/set handling > - remove max-pixel-rate support > - add audio codec DAI support > - change audio bindings > --- > drivers/media/i2c/Kconfig | 9 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/tda1997x.c | 3485 ++++++++++++++++++++++++++++++++++ > include/dt-bindings/media/tda1997x.h | 78 + This belongs with the binding documentation patch. > include/media/i2c/tda1997x.h | 53 + > 5 files changed, 3626 insertions(+) > create mode 100644 drivers/media/i2c/tda1997x.c > create mode 100644 include/dt-bindings/media/tda1997x.h > create mode 100644 include/media/i2c/tda1997x.h
